Re: [PATCH net-next v3 1/2] net: phy: marvell10g: implement suspend/resume callbacks

[Heiner Kallweit]

On 26.03.2019 15:53, Antoine Tenart wrote:
> This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The
> three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS
> are powered down) when the PHY isn't used.
> 
At least for the 3310 the datasheet mentions that via VEND2.f001.11
the port can be powered down completely. As this would simplify the code,
did you test this?

> Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> ---
>  drivers/net/phy/marvell10g.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
> index 100b401b1f4a..b56cd35182d5 100644
> --- a/drivers/net/phy/marvell10g.c
> +++ b/drivers/net/phy/marvell10g.c
> @@ -226,11 +226,25 @@ static int mv3310_probe(struct phy_device *phydev)
>  
>  static int mv3310_suspend(struct phy_device *phydev)
>  {
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_T + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_1000BASEX + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, MDIO_CTRL1_LPOWER);
> +
>  	return 0;
>  }
>  
>  static int mv3310_resume(struct phy_device *phydev)
>  {
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_T + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, 0);
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, 0);
> +	phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_1000BASEX + MDIO_CTRL1,
> +		       MDIO_CTRL1_LPOWER, 0);
> +
>  	return mv3310_hwmon_config(phydev, true);
>  }
>  
>