RE: [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs

[Z.q. Hou]

Hi Lorenzo,

Thanks for your comments!

> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Sent: 2019年3月27日 1:38
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> l.subrahmanya@xxxxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; catalin.marinas@xxxxxxx; will.deacon@xxxxxxx;
> Mingkai Hu <mingkai.hu@xxxxxxx>; M.h. Lian <minghuan.lian@xxxxxxx>;
> Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Subject: Re: [PATCHv4 00/28] PCI: refactor Mobiveil driver and add PCIe Gen4
> driver for NXP Layerscape SoCs
> 
> On Mon, Mar 11, 2019 at 09:29:54AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > This patch set is aim to refactor the Mobiveil driver and add PCIe
> > support for NXP Layerscape series SoCs integrated Mobiveil's PCIe Gen4
> > controller.
> >
> > Hou Zhiqiang (28):
> >   PCI: mobiveil: uniform the register accessors
> >   PCI: mobiveil: format the code without function change
> >   PCI: mobiveil: correct the returned error number
> >   PCI: mobiveil: remove flag MSI_FLAG_MULTI_PCI_MSI
> >   PCI: mobiveil: correct PCI base address in MEM/IO outbound windows
> >   PCI: mobiveil: replace the resource list iteration function
> >   PCI: mobiveil: use WIN_NUM_0 explicitly for CFG outbound window
> >   PCI: mobiveil: use the 1st inbound window for MEM inbound
> transactions
> >   PCI: mobiveil: correct inbound/outbound window setup routines
> >   PCI: mobiveil: fix the INTx process error
> >   PCI: mobiveil: only fix up the Class Code field
> >   PCI: mobiveil: move out the link up waiting from mobiveil_host_init
> >   PCI: mobiveil: move irq chained handler setup out of DT parse
> >   PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number
> >   dt-bindings: pci: mobiveil: change gpio_slave and apb_csr to optional
> >   PCI: mobiveil: refactor Mobiveil PCIe Host Bridge IP driver
> >   PCI: mobiveil: fix the checking of valid device
> >   PCI: mobiveil: add link up condition check
> >   PCI: mobiveil: continue to initialize the host upon no PCIe link
> >   PCI: mobiveil: disabled IB and OB windows set by bootloader
> >   PCI: mobiveil: add Byte and Half-Word width register accessors
> >   PCI: mobiveil: make mobiveil_host_init can be used to re-init host
> >   dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller
> >   PCI: mobiveil: add PCIe Gen4 RC driver for NXP Layerscape SoCs
> >   PCI: mobiveil: ls_pcie_g4: add Workaround for A-011577
> >   PCI: mobiveil: ls_pcie_g4: add Workaround for A-011451
> >   arm64: dts: freescale: lx2160a: add pcie DT nodes
> >   arm64: defconfig: Enable CONFIG_PCI_LAYERSCAPE_GEN4
> >
> >  .../bindings/pci/layerscape-pci-gen4.txt      |  52 ++
> >  .../devicetree/bindings/pci/mobiveil-pcie.txt |   2 +
> >  MAINTAINERS                                   |  10 +-
> >  .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 163 ++++
> >  arch/arm64/configs/defconfig                  |   1 +
> >  drivers/pci/controller/Kconfig                |  11 +-
> >  drivers/pci/controller/Makefile               |   2 +-
> >  drivers/pci/controller/mobiveil/Kconfig       |  34 +
> >  drivers/pci/controller/mobiveil/Makefile      |   5 +
> >  .../controller/mobiveil/pci-layerscape-gen4.c | 306 +++++++
> > .../controller/mobiveil/pcie-mobiveil-host.c  | 640 +++++++++++++
> > .../controller/mobiveil/pcie-mobiveil-plat.c  |  54 ++
> >  .../pci/controller/mobiveil/pcie-mobiveil.c   | 246 +++++
> >  .../pci/controller/mobiveil/pcie-mobiveil.h   | 229 +++++
> >  drivers/pci/controller/pcie-mobiveil.c        | 861 ------------------
> >  15 files changed, 1743 insertions(+), 873 deletions(-)  create mode
> > 100644 Documentation/devicetree/bindings/pci/layerscape-pci-gen4.txt
> >  create mode 100644 drivers/pci/controller/mobiveil/Kconfig
> >  create mode 100644 drivers/pci/controller/mobiveil/Makefile
> >  create mode 100644
> > drivers/pci/controller/mobiveil/pci-layerscape-gen4.c
> >  create mode 100644
> > drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
> >  create mode 100644
> > drivers/pci/controller/mobiveil/pcie-mobiveil-plat.c
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil.c
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil.h
> >  delete mode 100644 drivers/pci/controller/pcie-mobiveil.c
> 
> This patch series is a mixture of fixes, refactoring and development and to be
> frank it is a bit hard to review. Keeping in mind all the review comments
> already received and that I expect you to integrate, do you mind splitting it in
> logical series each one serving a specific purpose (eg fixes, Layerscape support,
> etc.) ?
> 
> Let's start with posting and merging the fixes first.

Thanks for your suggestion, and will split them.

> 
> Thank you very much.
> 
> Lorenzo

Thanks,
Zhiqiang