Re: [PATCH] net: ieee802154: fix missing checks for regmap_update_bits

[Mukesh Ojha]

On 3/25/2019 4:48 AM, Kangjie Lu wrote:
> regmap_update_bits could fail and deserves a check.
>
> The patch adds the checks and if it fails, returns its error
> code upstream.
>
> Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>


Reviewed-by: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>

-Mukesh

> ---
>   drivers/net/ieee802154/mcr20a.c | 6 ++++++
>   1 file changed, 6 insertions(+)
>
> diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
> index c589f5ae75bb..8bb53ec8d9cf 100644
> --- a/drivers/net/ieee802154/mcr20a.c
> +++ b/drivers/net/ieee802154/mcr20a.c
> @@ -533,6 +533,8 @@ mcr20a_start(struct ieee802154_hw *hw)
>   	dev_dbg(printdev(lp), "no slotted operation\n");
>   	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
>   				 DAR_PHY_CTRL1_SLOTTED, 0x0);
> +	if (ret < 0)
> +		return ret;
>   
>   	/* enable irq */
>   	enable_irq(lp->spi->irq);
> @@ -540,11 +542,15 @@ mcr20a_start(struct ieee802154_hw *hw)
>   	/* Unmask SEQ interrupt */
>   	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL2,
>   				 DAR_PHY_CTRL2_SEQMSK, 0x0);
> +	if (ret < 0)
> +		return ret;
>   
>   	/* Start the RX sequence */
>   	dev_dbg(printdev(lp), "start the RX sequence\n");
>   	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
>   				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
> +	if (ret < 0)
> +		return ret;
>   
>   	return 0;
>   }