[PATCH AUTOSEL 4.19 152/192] powerpc/pseries: Perform full re-add of CPU for topology update post-migration
From: Sasha Levin
Date: Wed Mar 27 2019 - 14:15:18 EST
From: Nathan Fontenot <nfont@xxxxxxxxxxxxxxxxxx>
[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]
On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.
Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.
The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.
Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: Nathan Fontenot <nfont@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Michael W. Bringmann <mwb@xxxxxxxxxxxxxxxxxx>
Tested-by: Michael W. Bringmann <mwb@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/powerpc/include/asm/topology.h | 2 ++
arch/powerpc/mm/numa.c | 9 +--------
arch/powerpc/platforms/pseries/hotplug-cpu.c | 19 +++++++++++++++++++
3 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index a4a718dbfec6..f85e2b01c3df 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -132,6 +132,8 @@ static inline void shared_proc_topology_init(void) {}
#define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
+
+int dlpar_cpu_readd(int cpu);
#endif
#endif
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5500e4edabc6..10fb43efef50 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1461,13 +1461,6 @@ static void reset_topology_timer(void)
#ifdef CONFIG_SMP
-static void stage_topology_update(int core_id)
-{
- cpumask_or(&cpu_associativity_changes_mask,
- &cpu_associativity_changes_mask, cpu_sibling_mask(core_id));
- reset_topology_timer();
-}
-
static int dt_update_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -1480,7 +1473,7 @@ static int dt_update_callback(struct notifier_block *nb,
!of_prop_cmp(update->prop->name, "ibm,associativity")) {
u32 core_id;
of_property_read_u32(update->dn, "reg", &core_id);
- stage_topology_update(core_id);
+ rc = dlpar_cpu_readd(core_id);
rc = NOTIFY_OK;
}
break;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 6ef77caf7bcf..1d3f9313c02f 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -802,6 +802,25 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
return rc;
}
+int dlpar_cpu_readd(int cpu)
+{
+ struct device_node *dn;
+ struct device *dev;
+ u32 drc_index;
+ int rc;
+
+ dev = get_cpu_device(cpu);
+ dn = dev->of_node;
+
+ rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
+
+ rc = dlpar_cpu_remove_by_index(drc_index);
+ if (!rc)
+ rc = dlpar_cpu_add(drc_index);
+
+ return rc;
+}
+
int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
{
u32 count, drc_index;
--
2.19.1