[BUG] net: core: netif_receive_skb_list() crash on non-standard ptypes forwarding

[Alexander Lobakin]

Hi Edward,

Seems like I've found another poisoned skb->next crash with
netif_receive_skb_list().
This is similar to the one than has been already fixed in 22f6bbb7bcfc
("net: use skb_list_del_init() to remove from RX sublists"). This one 
however
applies only to non-standard ptypes (in my case -- ETH_P_XDSA).

I use simple VLAN NAT setup through nft. After switching my in-dev 
driver to
netif_receive_skb_list(), system started to crash on forwarding:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual 
address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 
5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404	IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), 
task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 
85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 
87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 
00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 
87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 
85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 
00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in 
interrupt ]---

Some additional debug have showed that skb->next is poisoned on 
dsa_switch_rcv()
-- ETH_P_XDSA ptype .func() callback. So when skb enters 
dev_hard_start_xmit(),
function tries to "schedule" backpointer to list_head for transmitting.

Here's a working possible fix for that, not sure if it can break 
anything
though.

diff --git a/net/core/dev.c b/net/core/dev.c
index 2b67f2aa59dd..fdcff29df915 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5014,8 +5014,10 @@ static inline void 
__netif_receive_skb_list_ptype(struct list_head *head,
	if (pt_prev->list_func != NULL)
		pt_prev->list_func(head, pt_prev, orig_dev);
	else
-		list_for_each_entry_safe(skb, next, head, list)
+		list_for_each_entry_safe(skb, next, head, list) {
+			skb_list_del_init(skb);
			pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
+		}
}

static void __netif_receive_skb_list_core(struct list_head *head, bool 
pfmemalloc)

Maybe you could look into this and find another/better solution (or I 
could
submit this one if that's pretty enough).

BTW, great work with netif_receive_skb_list() -- I've got 70 Mbps gain 
(~15%)
on my setup in comparsion to napi_gro_receive().

Thanks,
Alexander.

Regards,
á á á á á á