[PATCH 15/23] acpi doc: convert acpi/debug.txt to rst format

[Changbin Du]

This converts the plain text documentation to reStructuredText format and
add it to Sphinx TOC tree. No essential content change.

Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
---
 Documentation/acpi/{debug.txt => debug.rst}   | 31 ++++++++++---------
 ...eferences.txt => data-node-references.rst} | 27 +++++++++-------
 Documentation/acpi/index.rst                  |  2 ++
 3 files changed, 33 insertions(+), 27 deletions(-)
 rename Documentation/acpi/{debug.txt => debug.rst} (91%)
 rename Documentation/acpi/dsd/{data-node-references.txt => data-node-references.rst} (80%)

diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.rst
similarity index 91%
rename from Documentation/acpi/debug.txt
rename to Documentation/acpi/debug.rst
index 65bf47c46b6d..c9aa32b3a80b 100644
--- a/Documentation/acpi/debug.txt
+++ b/Documentation/acpi/debug.rst
@@ -1,18 +1,19 @@
-			ACPI Debug Output
-
+=================
+ACPI Debug Output
+=================
 
 The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug
 output.  This document describes how to use this facility.
 
 Compile-time configuration
---------------------------
+==========================
 
 ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG.  If this config
 option is turned off, the debug messages are not even built into the
 kernel.
 
 Boot- and run-time configuration
---------------------------------
+================================
 
 When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages
 you're interested in.  At boot-time, use the acpi.debug_layer and
@@ -21,7 +22,7 @@ debug_layer and debug_level files in /sys/module/acpi/parameters/ to control
 the debug messages.
 
 debug_layer (component)
------------------------
+=======================
 
 The "debug_layer" is a mask that selects components of interest, e.g., a
 specific driver or part of the ACPI interpreter.  To build the debug_layer
@@ -33,7 +34,7 @@ to /sys/module/acpi/parameters/debug_layer.
 
 The possible components are defined in include/acpi/acoutput.h and
 include/acpi/acpi_drivers.h.  Reading /sys/module/acpi/parameters/debug_layer
-shows the supported mask values, currently these:
+shows the supported mask values, currently these::
 
     ACPI_UTILITIES                  0x00000001
     ACPI_HARDWARE                   0x00000002
@@ -65,7 +66,7 @@ shows the supported mask values, currently these:
     ACPI_PROCESSOR_COMPONENT        0x20000000
 
 debug_level
------------
+===========
 
 The "debug_level" is a mask that selects different types of messages, e.g.,
 those related to initialization, method execution, informational messages, etc.
@@ -81,7 +82,7 @@ to /sys/module/acpi/parameters/debug_level.
 
 The possible levels are defined in include/acpi/acoutput.h.  Reading
 /sys/module/acpi/parameters/debug_level shows the supported mask values,
-currently these:
+currently these::
 
     ACPI_LV_INIT                    0x00000001
     ACPI_LV_DEBUG_OBJECT            0x00000002
@@ -113,9 +114,9 @@ currently these:
     ACPI_LV_EVENTS                  0x80000000
 
 Examples
---------
+========
 
-For example, drivers/acpi/bus.c contains this:
+For example, drivers/acpi/bus.c contains this::
 
     #define _COMPONENT              ACPI_BUS_COMPONENT
     ...
@@ -127,22 +128,22 @@ statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
 definition.)
 
 Enable all AML "Debug" output (stores to the Debug object while interpreting
-AML) during boot:
+AML) during boot::
 
     acpi.debug_layer=0xffffffff acpi.debug_level=0x2
 
-Enable PCI and PCI interrupt routing debug messages:
+Enable PCI and PCI interrupt routing debug messages::
 
     acpi.debug_layer=0x400000 acpi.debug_level=0x4
 
-Enable all ACPI hardware-related messages:
+Enable all ACPI hardware-related messages::
 
     acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 
-Enable all ACPI_DB_INFO messages after boot:
+Enable all ACPI_DB_INFO messages after boot::
 
     # echo 0x4 > /sys/module/acpi/parameters/debug_level
 
-Show all valid component values:
+Show all valid component values::
 
     # cat /sys/module/acpi/parameters/debug_layer
diff --git a/Documentation/acpi/dsd/data-node-references.txt b/Documentation/acpi/dsd/data-node-references.rst
similarity index 80%
rename from Documentation/acpi/dsd/data-node-references.txt
rename to Documentation/acpi/dsd/data-node-references.rst
index c3871565c8cf..83a368d9d208 100644
--- a/Documentation/acpi/dsd/data-node-references.txt
+++ b/Documentation/acpi/dsd/data-node-references.rst
@@ -1,9 +1,11 @@
-Copyright (C) 2018 Intel Corporation
-Author: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
-
+.. include:: <isonum.txt>
 
+===================================
 Referencing hierarchical data nodes
------------------------------------
+===================================
+
+:Copyright: |copy| 2018 Intel Corporation
+:Author: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
 
 ACPI in general allows referring to device objects in the tree only.
 Hierarchical data extension nodes may not be referred to directly, hence this
@@ -28,13 +30,14 @@ extension key.
 
 
 Example
--------
+=======
 
-	In the ASL snippet below, the "reference" _DSD property [2] contains a
-	device object reference to DEV0 and under that device object, a
-	hierarchical data extension key "node@1" referring to the NOD1 object
-	and lastly, a hierarchical data extension key "anothernode" referring to
-	the ANOD object which is also the final target node of the reference.
+In the ASL snippet below, the "reference" _DSD property [2] contains a
+device object reference to DEV0 and under that device object, a
+hierarchical data extension key "node@1" referring to the NOD1 object
+and lastly, a hierarchical data extension key "anothernode" referring to
+the ANOD object which is also the final target node of the reference.
+::
 
 	Device (DEV0)
 	{
@@ -75,10 +78,10 @@ Example
 	    })
 	}
 
-Please also see a graph example in graph.txt .
+Please also see a graph example in :doc:`graph`.
 
 References
-----------
+==========
 
 [1] Hierarchical Data Extension UUID For _DSD.
     <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
diff --git a/Documentation/acpi/index.rst b/Documentation/acpi/index.rst
index e10ce874269c..3bd1d9996ffc 100644
--- a/Documentation/acpi/index.rst
+++ b/Documentation/acpi/index.rst
@@ -8,6 +8,7 @@ Linux ACPI (Advanced Configuration and Power Interface)
    linuxized-acpica
    namespace
    dsd/graph
+   dsd/data-node-references
    enumeration
    osi
    DSD-properties-rules
@@ -18,3 +19,4 @@ Linux ACPI (Advanced Configuration and Power Interface)
    method-customizing
    initrd_table_override
    dsdt-override
+   debug
-- 
2.20.1