Re: [PATCH v3 03/12] dt-binding: gce: add binding for gce event property

[Rob Herring]

On Thu, Mar 28, 2019 at 10:19:24AM +0800, Bibby Hsieh wrote:
> Client hardware would send event to GCE hardware,
> so #event-cells, mediatek,gce-event-names, mediatek,gce-events.
> present the event.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> index 1f7f8f2..2f175d6 100644
> --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
> @@ -21,12 +21,21 @@ Required properties:
>  	priority: Priority of GCE thread.
>  	atomic_exec: GCE processing continuous packets of commands in atomic
>  		way.
> +- #event-cells: Should be 1.
> +	<&phandle event_number>
> +	phandle: Label name of a gce node.
> +	event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h'
> +		      or 'dt-binding/gce/mt8183-gce.h'.

You only need to have a #*-cells if the number is variable.

What are 'events' here? Sounds like interrupts or MSI?

>  
>  Required properties for a client device:
>  - mboxes: Client use mailbox to communicate with GCE, it should have this
>    property and list of phandle, mailbox specifiers.
>  - mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
>    to the register address.
> +Optional propertier for a client device:
> +- mediatek,gce-event-names: the event name can be defined by user.
> +- mediatek,gce-events: u32, the event number defined in
> +  'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'.
>  
>  Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
>  or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
> @@ -40,6 +49,7 @@ Example:
>  		clocks = <&infracfg CLK_INFRA_GCE>;
>  		clock-names = "gce";
>  		#mbox-cells = <3>;
> +		#event-cells = <1>;
>  	};
>  
>  Example for a client device:
> @@ -49,8 +59,9 @@ Example for a client device:
>  		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
>  			 <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
>  		mediatek,gce-subsys = <SUBSYS_1400XXXX>;
> -		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
> -				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
> -
> +		mediatek,gce-event-names = "rdma0_sof",
> +					   "rsz0_sof";
> +		mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
> +				      <&gce CMDQ_EVENT_MDP_RSZ0_SOF>;
>  		...
>  	};
> -- 
> 1.9.1
>