Re: [PATCH v2] mfd: cros: Update EC protocol to match current EC code

[Gwendal Grignou]

On Wed, Mar 27, 2019 at 2:31 AM Enric Balletbo i Serra
<enric.balletbo@xxxxxxxxxxxxx> wrote:
>
> Hi Gwendal,
>
> Unless my pwclient or patchwork is doing something weird I have some issues
> trying to apply this patch. Could you check that is correctly formatted?
In lore.kernel.org, the first 100 lines of the patch are missing.
Resending.

Gwendal.
>
> $ pwclient git-am 1055029
>
> Applying patch #1055029 using u'git am'
> Description: [v2] mfd: cros: Update EC protocol to match current EC code
> Applying: mfd: cros: Update EC protocol to match current EC code
> error: patch fragment without header at line 11: @@ -105,15 +120,24 @@
> Patch failed at 0001 mfd: cros: Update EC protocol to match current EC code
> hint: Use 'git am --show-current-patch' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> 'git am' failed with exit status 128
>
> Also if I try to apply the patch directly I got:
>
> $ git am --show-current-patch | patch -p1
> patching file include/linux/mfd/cros_ec_commands.h
> patch: **** malformed patch at line 5615: (8-bit) */
>
> On 26/3/19 18:21, Gwendal Grignou wrote:
> > Chromebook Embedded Controller protocol is defined in the kernel at
> > cros_ec_commands.h.
> > The source of trust for the EC protocol is at
> > https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> >
> > Only needed changes have been picked up from this file to the kernel
> > include file leading to gaps between the upstream version and what the
> > latest ECs can do.
> >
> > Fill the gaps to ease future integrations. Changes from the original
> > files is header/footer for license and include files for alignment.
> >
> > Check this include file works on ChomeOS kernel 4.14 and 4.19 on eve.
> >
> > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > - Replace 1 << with BIT()
> > - Check checkpatch warning/errors are outside kernel scope.
> > - Update .h with latest changes.
> >
> >  include/linux/mfd/cros_ec_commands.h | 3723 +++++++++++++++++++++-----
> >  1 file changed, 2992 insertions(+), 731 deletions(-)
> >
> > diff --git a/include/linux/mfd/cros_ec_commands.h
> > b/include/linux/mfd/cros_ec_commands.h
> > index fc91082d4c35..5c4764e3db6f 100644
> > --- a/include/linux/mfd/cros_ec_commands.h
> > +++ b/include/linux/mfd/cros_ec_commands.h
>
> [snip]
>
> > @@ -33,7 +46,7 @@
> >  #define EC_PROTO_VERSION          0x00000002
> >
> >  /* Command version mask */
> > -#define EC_VER_MASK(version) (1UL << (version))
> > +#define EC_VER_MASK(version) BIT(version)
> >
> >  /* I/O addresses for ACPI commands */
> >  #define EC_LPC_ADDR_ACPI_DATA  0x62
> > @@ -59,13 +72,13 @@
> >  #define EC_HOST_CMD_REGION_SIZE 0x80
> >
> >  /* EC command register bit functions */
> > -#define EC_LPC_CMDR_DATA     (1 << 0)  /* Data ready for host to read */
> > -#define EC_LPC_CMDR_PENDING  (1 << 1)  /* Write pending to EC */
> > -#define EC_LPC_CMDR_BUSY     (1 << 2)  /* EC is busy processing a command */
> > -#define EC_LPC_CMDR_CMD              (1 << 3)  /* Last host write was a command */
> > -#define EC_LPC_CMDR_ACPI_BRST        (1 << 4)  /* Burst mode (not used) */
> > -#define EC_LPC_CMDR_SCI              (1 << 5)  /* SCI event is pending */
> > -#define EC_LPC_CMDR_SMI              (1 << 6)  /* SMI event is pending */
> > +#define EC_LPC_CMDR_DATA     BIT(0)  /* Data ready for host to read */
> > +#define EC_LPC_CMDR_PENDING  BIT(1)  /* Write pending to EC */
> > +#define EC_LPC_CMDR_BUSY     BIT(2)  /* EC is busy processing a command */
> > +#define EC_LPC_CMDR_CMD              BIT(3)  /* Last host write was a command */
> > +#define EC_LPC_CMDR_ACPI_BRST        BIT(4)  /* Burst mode (not used) */
> > +#define EC_LPC_CMDR_SCI              BIT(5)  /* SCI event is pending */
> > +#define EC_LPC_CMDR_SMI              BIT(6)  /* SMI event is pending */
> >
> >  #define EC_LPC_ADDR_MEMMAP       0x900
> >  #define EC_MEMMAP_SIZE         255 /* ACPI IO buffer max is 255 bytes */
> > @@ -85,13 +98,15 @@
> >  /* Unused 0x28 - 0x2f */
> >  #define EC_MEMMAP_SWITCHES         0x30      /* 8 bits */
> >  /* Unused 0x31 - 0x33 */
> > -#define EC_MEMMAP_HOST_EVENTS      0x34 /* 32 bits */
> > -/* Reserve 0x38 - 0x3f for additional host event-related stuff */
> > -/* Battery values are all 32 bits */
> > +#define EC_MEMMAP_HOST_EVENTS      0x34 /* 64 bits */
> > +/* Battery values are all 32 bits, unless otherwise noted. */
> >  #define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
> >  #define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
> >  #define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
> > -#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, defined below */
> > +#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, see below (8-bit) */
> > +#define EC_MEMMAP_BATT_COUNT       0x4d /* Battery Count (8-bit) */
> > +#define EC_MEMMAP_BATT_INDEX       0x4e /* Current Battery Data Index
> > (8-bit) */
>
> Complains about this malformed line, but even after fix this I got other issues.
>
> Thanks,
>  Enric