Re: [PATCH v7 0/4] drm: add support for Cadence MHDP DPI/DP bridge.
From: Tomi Valkeinen
Date: Fri Mar 29 2019 - 05:43:35 EST
On 27/03/2019 16:58, Damian Kos wrote:
> We would be very happy to have a separate driver for mhdp8546 instead of
> mixing it with Rockchip's driver. Unfortunately we need to have one driver
> for both IP's, so I'll just change mhdp8546.ko to cdns-mhdp.ko. (Unless,
> maintainers give us a green light for the dedicated driver?)
Ok. I don't know about the differences, so I can't say much here. But I
do think that you shouldn't combine drivers for two different IPs unless
they are very similar. And if two different IPs have a block that's the
same/similar, the code for that block can be extracted to a "library"
used by both drivers.
>>> I see some audio functions in the code, but it's not mentioned in the DT
>>> bindings. I'm not an audio guy, but the display bridges with audio
>>> support I have seen have had DT bindings for the audio source too. Is
>>> audio supported in the current driver?
>>>
> As far as I know, audio is working, but I can't double check it right now
> due to heavy load on my back right now. I'll try to find time for that in the
> next week. But, like I've mentioned earlier I don't see a reason why audio
> code (that exists in the mainline) wouldn't work.
> I'm not an audio guy myself. When updating dt bindings I took the dt bindings
> for other bridges as an example, but I did not see any bindings for audio in
> them. I didn't check all of them. Can you please let me know which bridges
> are you were referring to? In our test environment we didn't use any audio
> driver as audio generator is so simple that it is part of the register space
> of IP and we didn't even need to include this device in .dts file. Audio (like
> the video) is configured and enabled by code that is not included in the patch
> (for obvious reasons).
> So, in short, yes, driver supports audio and we will include description for
> audio input port in the dt bindings.
Ok. Jyri Sarha <jsarha@xxxxxx> recently sent "drm/bridge: sii902x:
HDMI-audio support and some fixes" series, and I think tda998x_drv.c
also has some audio support. But I'm no audio guy either =). I was just
curious about the status of the audio.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki