[PATCH v2 12/13] arm64: dts: msm8996: thermal: Make trip names consistent

[Amit Kucheria]

Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e2408ee91184..edcddc74a4fc 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -154,20 +154,20 @@
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu0_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu0_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -175,20 +175,20 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu1_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu1_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -196,20 +196,20 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu2_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu2_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -217,20 +217,20 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu3_alert0: trip-point@0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit3: trip1 {
+				cpu3_crit: cpu_crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
-- 
2.17.1