[PATCH 2/2] EDAC, altera: Use global Stratix10 SMC defines

[thor . thayer]

From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>

Use the global Stratix10 SMC defines instead of the local
S10 SMC defines.

Reviewed-by: Richard Gong <richard.gong@xxxxxxxxx>
Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
---
 drivers/edac/altera_edac.c |  1 +
 drivers/edac/altera_edac.h | 83 ----------------------------------------------
 2 files changed, 1 insertion(+), 83 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 761199175c76..8816f74a22b4 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -9,6 +9,7 @@
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/edac.h>
+#include <linux/firmware/intel/stratix10-smc.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip/chained_irq.h>
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 1532ec9c3510..55654cc4bcdf 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -372,87 +372,4 @@ struct altr_arria10_edac {
 	struct notifier_block	panic_notifier;
 };
 
-/*
- * Functions specified by ARM SMC Calling convention:
- *
- * FAST call executes atomic operations, returns when the requested operation
- * has completed.
- * STD call starts a operation which can be preempted by a non-secure
- * interrupt. The call can return before the requested operation has
- * completed.
- *
- * a0..a7 is used as register names in the descriptions below, on arm32
- * that translates to r0..r7 and on arm64 to w0..w7.
- */
-
-#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
-	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
-	ARM_SMCCC_OWNER_SIP, (func_num))
-
-#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
-	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
-	ARM_SMCCC_OWNER_SIP, (func_num))
-
-#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
-#define INTEL_SIP_SMC_STATUS_OK				0x0
-#define INTEL_SIP_SMC_REG_ERROR				0x5
-
-/*
- * Request INTEL_SIP_SMC_REG_READ
- *
- * Read a protected register using SMCCC
- *
- * Call register usage:
- * a0: INTEL_SIP_SMC_REG_READ.
- * a1: register address.
- * a2-7: not used.
- *
- * Return status:
- * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
- *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
- * a1: Value in the register
- * a2-3: not used.
- */
-#define INTEL_SIP_SMC_FUNCID_REG_READ 7
-#define INTEL_SIP_SMC_REG_READ \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
-
-/*
- * Request INTEL_SIP_SMC_REG_WRITE
- *
- * Write a protected register using SMCCC
- *
- * Call register usage:
- * a0: INTEL_SIP_SMC_REG_WRITE.
- * a1: register address
- * a2: value to program into register.
- * a3-7: not used.
- *
- * Return status:
- * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
- *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
- * a1-3: not used.
- */
-#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
-#define INTEL_SIP_SMC_REG_WRITE \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
-
-/*
- * Request INTEL_SIP_SMC_ECC_DBE
- *
- * Sync call used by service driver at EL1 alert EL3 that a Double Bit
- * ECC error has occurred.
- *
- * Call register usage:
- * a0 INTEL_SIP_SMC_ECC_DBE
- * a1 SysManager Double Bit Error value
- * a2-7 not used
- *
- * Return status
- * a0 INTEL_SIP_SMC_STATUS_OK
- */
-#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
-#define INTEL_SIP_SMC_ECC_DBE \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
-
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
2.7.4