[PATCH 4/4] ARM: dts: omap2420-n810: Use new CODEC reset pin name

[Andrew F. Davis]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
 arch/arm/boot/dts/omap2420-n810.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
index 96b9913ecc1f..09c1dbc0bb69 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -48,7 +48,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&aic33_pins>;
 
-		gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
 
 		ai3x-gpio-func = <
 			10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
-- 
2.21.0