Re: [PATCH 6/7] dt-bindings: add header file of ASR8751C pinctrl driver
From: Rob Herring
Date: Sun Mar 31 2019 - 02:41:48 EST
On Sat, Mar 23, 2019 at 10:01:27PM +0800, qiaozhou wrote:
> From: Qiao Zhou <qiaozhou@xxxxxxxxxxxx>
>
> Add pinctrl definition and configuration of ASR8751C pins. The
> configuration contains pull up/down, driver strength, edge detection,
> multiple function etc.
>
> Signed-off-by: qiaozhou <qiaozhou@xxxxxxxxxxxx>
> ---
> include/dt-bindings/pinctrl/asr8751c-pinfunc.h | 341 +++++++++++++++++++++++++
> 1 file changed, 341 insertions(+)
> create mode 100644 include/dt-bindings/pinctrl/asr8751c-pinfunc.h
>
> diff --git a/include/dt-bindings/pinctrl/asr8751c-pinfunc.h b/include/dt-bindings/pinctrl/asr8751c-pinfunc.h
> new file mode 100644
> index 0000000..b326a6d
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/asr8751c-pinfunc.h
> @@ -0,0 +1,341 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header provides constants for ASR Aquila pinctrl bindings.
> + *
> + * Copyright (c) 2019, ASR Microelectronics(Shanghai) Co., Ltd.
> + * All rights reserved.
> + *
> + * Author: Tim Wang <timwang@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
Don't need the GPL boilerplate with the SPDX tag.
> + */
> +
> +#ifndef __DTS_ASR8751C_PINFUNC_H
> +#define __DTS_ASR8751C_PINFUNC_H
> +
> +/*
> + * drive-strength = <value mask>
> + * SLOW0: < 75MHz
> + * SLOW1: < 150MHz
> + * MEDIUM: < 200MHz
> + * FAST: > 200MHz
> + */
> +#define DS_SLOW0 pinctrl-single,drive-strength = <0x0000 0x1800>
> +#define DS_SLOW1 pinctrl-single,drive-strength = <0x0800 0x1800>
> +#define DS_MEDIUM pinctrl-single,drive-strength = <0x1000 0x1800>
> +#define DS_FAST pinctrl-single,drive-strength = <0x1800 0x1800>
Don't do complex definitions. Keep it to simple value defines.
> +
> +/*
> + * Edge detect setting
> + * input-schmitt = <value mask>;
> + * input-schmitt-enable = <value enable disable mask>
> + */
> +
> +/* no edge detect */
> +#define EDGE_NONE pinctrl-single,input-schmitt = <0x00 0x30>; \
> + pinctrl-single,input-schmitt-enable = <0x40 0x00 0x40 0x40>
> +/* enable edge fall detect only*/
> +#define EDGE_FALL pinctrl-single,input-schmitt = <0x20 0x30>; \
> + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40>
> +/* enable edge rise detect only */
> +#define EDGE_RISE pinctrl-single,input-schmitt = <0x10 0x30>; \
> + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40>
> +/* enable edge fall/rise detect */
> +#define EDGE_BOTH pinctrl-single,input-schmitt = <0x30 0x30>; \
> + pinctrl-single,input-schmitt-enable = <0x00 0x00 0x40 0x40>
> +
> +/*
> + * bias-pullup = <value enable disable mask>;
> + * bias-pulldown = <value enable disable mask>
> + */
> +
> +/* PULL_SEL controlled by Alternative Function */
> +#define PULL_NONE pinctrl-single,bias-pullup = <0x0000 0xc000 0x0000 0xc000>; \
> + pinctrl-single,bias-pulldown = <0x0000 0xa000 0x0000 0xa000>
> +/* PULL_SEL controlled by MFPR, enable PULL_UP, disable PULL_DOWN */
> +#define PULL_UP pinctrl-single,bias-pullup = <0xc000 0xc000 0x0000 0xc000>; \
> + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>
> +/* PULL_SEL controlled by MFPR, disable PULL_UP, enable PULL_DOWN */
> +#define PULL_DOWN pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>; \
> + pinctrl-single,bias-pulldown = <0xa000 0xa000 0x0000 0xa000>
> +/* PULL_SEL controlled by MFPR, enable PULL_UP and PULL_DOWN */
> +#define PULL_BOTH pinctrl-single,bias-pullup = <0xc000 0xc000 0x8000 0xc000>; \
> + pinctrl-single,bias-pulldown = <0xa000 0xa000 0x8000 0xa000>
> +/* PULL_SEL controlled by MFPR, disable PULL_UP and PULL_DOWN */
> +#define PULL_FLOAT pinctrl-single,bias-pullup = <0x8000 0x8000 0x0000 0xc000>; \
> + pinctrl-single,bias-pulldown = <0x8000 0x8000 0x0000 0xa000>
> +/* Low Power Mode settings */
> +/* no LPM setting, LPM state same as active */
> +#define LPM_NONE pinctrl-single,low-power-mode = <0x000 0x388>
> +/* LPM, output 0 */
> +#define LPM_DRIVE_LOW pinctrl-single,low-power-mode = <0x208 0x388>
> +/* LPM, output 1*/
> +#define LPM_DRIVE_HIGH pinctrl-single,low-power-mode = <0x308 0x388>
> +/* LPM, input state */
> +#define LPM_FLOAT pinctrl-single,low-power-mode = <0x288 0x388>
> +
> +/* Active settings */
> +#define MFP_DEFAULT DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_NONE
> +#define MFP_PULL_UP DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_NONE
> +#define MFP_PULL_DOWN DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_NONE
> +#define MFP_PULL_FLOAT DS_MEDIUM;PULL_FLOAT;EDGE_NONE;LPM_NONE
> +
> +/* LPM output */
> +#define MFP_LPM_DRIVE_HIGH DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_DRIVE_HIGH
> +#define MFP_LPM_DRIVE_LOW DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_DRIVE_LOW
> +
> +/* LPM input */
> +#define MFP_LPM_FLOAT DS_MEDIUM;PULL_NONE;EDGE_NONE;LPM_FLOAT
> +#define MFP_LPM_PULL_UP DS_MEDIUM;PULL_UP;EDGE_NONE;LPM_FLOAT
> +#define MFP_LPM_PULL_DW DS_MEDIUM;PULL_DOWN;EDGE_NONE;LPM_FLOAT
> +
> +/*
> + * MFP alternative functions 0-7
> + */
> +#define AF0 0x0
> +#define AF1 0x1
> +#define AF2 0x2
> +#define AF3 0x3
> +#define AF4 0x4
> +#define AF5 0x5
> +#define AF6 0x6
> +#define AF7 0x7
> +
> +/*
> + * Pin names and MFPR addresses
> + */
> +#define MFPR_OFFSET(x) ((x) << 2)
> +#define GPIO_00 MFPR_OFFSET(1)
> +#define GPIO_01 MFPR_OFFSET(2)
> +#define GPIO_02 MFPR_OFFSET(3)
> +#define GPIO_03 MFPR_OFFSET(4)
> +#define GPIO_04 MFPR_OFFSET(5)
> +#define GPIO_05 MFPR_OFFSET(6)
> +#define GPIO_06 MFPR_OFFSET(7)
> +#define GPIO_07 MFPR_OFFSET(8)
> +#define GPIO_08 MFPR_OFFSET(9)
> +#define GPIO_09 MFPR_OFFSET(10)
> +#define GPIO_10 MFPR_OFFSET(11)
> +#define GPIO_11 MFPR_OFFSET(12)
> +#define GPIO_12 MFPR_OFFSET(13)
> +#define GPIO_13 MFPR_OFFSET(14)
> +#define GPIO_14 MFPR_OFFSET(15)
> +#define GPIO_15 MFPR_OFFSET(16)
> +#define GPIO_16 MFPR_OFFSET(17)
> +#define GPIO_17 MFPR_OFFSET(18)
> +#define GPIO_18 MFPR_OFFSET(19)
> +#define GPIO_19 MFPR_OFFSET(20)
> +#define GPIO_20 MFPR_OFFSET(21)
> +#define GPIO_21 MFPR_OFFSET(22)
> +#define GPIO_22 MFPR_OFFSET(23)
> +#define GPIO_23 MFPR_OFFSET(24)
> +#define GPIO_24 MFPR_OFFSET(25)
> +#define GPIO_25 MFPR_OFFSET(26)
> +#define RXTXEN MFPR_OFFSET(27)
> +#define PRI_TXFRAME MFPR_OFFSET(28)
> +#define SPI0_EN MFPR_OFFSET(29)
> +#define RF_RESET_N MFPR_OFFSET(30)
> +#define SEC_SYSCLKEN MFPR_OFFSET(31)
> +#define PRI_RXFRAME MFPR_OFFSET(32)
> +#define PRI_RBDP0_0 MFPR_OFFSET(33)
> +#define PRI_RBDP0_1 MFPR_OFFSET(34)
> +#define PRI_RBDP0_2 MFPR_OFFSET(35)
> +#define PRI_RBDP0_3 MFPR_OFFSET(36)
> +#define PRI_RBDP0_4 MFPR_OFFSET(37)
> +#define PRI_RBDP0_5 MFPR_OFFSET(38)
> +#define PRI_RBDP0_6 MFPR_OFFSET(39)
> +#define PRI_RBDP0_7 MFPR_OFFSET(40)
> +#define PRI_RBDP0_8 MFPR_OFFSET(41)
> +#define PRI_RBDP0_9 MFPR_OFFSET(42)
> +#define PRI_RBDP0_10 MFPR_OFFSET(43)
> +#define PRI_MCLK MFPR_OFFSET(98)
> +#define PRI_RBDP0_11 MFPR_OFFSET(44)
> +#define RXTXDATA MFPR_OFFSET(45)
> +#define SYSCLK_OUT MFPR_OFFSET(46)
> +#define PRI_FCLK MFPR_OFFSET(47)
> +#define PRI_RBDP1_0 MFPR_OFFSET(48)
> +#define PRI_RBDP1_1 MFPR_OFFSET(49)
> +#define SPI0_CLK MFPR_OFFSET(50)
> +#define PRI_RBDP1_2 MFPR_OFFSET(51)
> +#define PRI_RBDP1_3 MFPR_OFFSET(52)
> +#define PRI_RBDP1_4 MFPR_OFFSET(53)
> +#define PRI_RBDP1_5 MFPR_OFFSET(54)
> +#define PRI_RBDP1_6 MFPR_OFFSET(55)
> +#define PRI_RBDP1_7 MFPR_OFFSET(56)
> +#define PRI_RBDP1_8 MFPR_OFFSET(57)
> +#define PRI_RBDP1_9 MFPR_OFFSET(58)
> +#define SPI0_DIO MFPR_OFFSET(59)
> +#define PRI_RBDP1_10 MFPR_OFFSET(60)
> +#define PRI_RBDP1_11 MFPR_OFFSET(61)
> +#define SPI1_EN MFPR_OFFSET(62)
> +#define SEC_RXFRAME MFPR_OFFSET(63)
> +#define SEC_RBDP0_0 MFPR_OFFSET(64)
> +#define SEC_RBDP0_1 MFPR_OFFSET(65)
> +#define SEC_RBDP0_2 MFPR_OFFSET(66)
> +#define SEC_RBDP0_3 MFPR_OFFSET(67)
> +#define SEC_RBDP0_4 MFPR_OFFSET(68)
> +#define SEC_RBDP0_5 MFPR_OFFSET(69)
> +#define SEC_RBDP0_6 MFPR_OFFSET(70)
> +#define SEC_RBDP0_7 MFPR_OFFSET(71)
> +#define SEC_RBDP0_8 MFPR_OFFSET(72)
> +#define SEC_RBDP0_9 MFPR_OFFSET(73)
> +#define SEC_RBDP0_10 MFPR_OFFSET(74)
> +#define SEC_MCLK MFPR_OFFSET(99)
> +#define SEC_RBDP0_11 MFPR_OFFSET(75)
> +#define SPI1_CLK MFPR_OFFSET(76)
> +#define SPI1_DIO MFPR_OFFSET(77)
> +#define CP_GPO_0 MFPR_OFFSET(78)
> +#define CP_GPO_1 MFPR_OFFSET(79)
> +#define CP_GPO_2 MFPR_OFFSET(80)
> +#define CP_GPO_3 MFPR_OFFSET(81)
> +#define CP_GPO_4 MFPR_OFFSET(82)
> +#define CP_GPO_5 MFPR_OFFSET(83)
> +#define CP_GPO_6 MFPR_OFFSET(84)
> +#define CP_GPO_7 MFPR_OFFSET(85)
> +#define CP_GPO_8 MFPR_OFFSET(86)
> +#define CP_GPO_9 MFPR_OFFSET(87)
> +#define CP_GPO_10 MFPR_OFFSET(88)
> +#define CP_GPO_11 MFPR_OFFSET(89)
> +#define CP_GPO_12 MFPR_OFFSET(90)
> +#define CP_GPO_13 MFPR_OFFSET(91)
> +#define CP_GPO_14 MFPR_OFFSET(92)
> +#define CP_GPO_15 MFPR_OFFSET(93)
> +#define CP_UART_RXD MFPR_OFFSET(94)
> +#define CP_UART_TXD MFPR_OFFSET(95)
> +#define CP_UART_RTS MFPR_OFFSET(96)
> +#define CP_UART_CTS MFPR_OFFSET(97)
> +#define USIM2_UCLK MFPR_OFFSET(100)
> +#define USIM2_UIO MFPR_OFFSET(101)
> +#define USIM2_URSTn MFPR_OFFSET(102)
> +#define USIM_UCLK MFPR_OFFSET(103)
> +#define USIM_UIO MFPR_OFFSET(104)
> +#define USIM_URSTn MFPR_OFFSET(105)
> +#define MMC1_DAT3 MFPR_OFFSET(110)
> +#define MMC1_DAT2 MFPR_OFFSET(111)
> +#define MMC1_DAT1 MFPR_OFFSET(112)
> +#define MMC1_DAT0 MFPR_OFFSET(113)
> +#define MMC1_CMD MFPR_OFFSET(114)
> +#define MMC1_CLK MFPR_OFFSET(115)
> +#define PWR_SCL MFPR_OFFSET(118)
> +#define PWR_SDA MFPR_OFFSET(119)
> +#define VCXO_EN MFPR_OFFSET(120)
> +#define VBAT_DROP MFPR_OFFSET(121)
> +#define PMIC_INT_N MFPR_OFFSET(122)
> +#define PRI_TDI MFPR_OFFSET(123)
> +#define PRI_TMS MFPR_OFFSET(124)
> +#define PRI_TCK MFPR_OFFSET(125)
> +#define PRI_TDO MFPR_OFFSET(126)
> +#define SLAVE_RESET_OUT MFPR_OFFSET(127)
> +#define VCXO_REQ1 MFPR_OFFSET(128)
> +#define VCXO_REQ MFPR_OFFSET(129)
> +#define VCXO_OUT MFPR_OFFSET(130)
> +#define GPIO_26 MFPR_OFFSET(131)
> +#define GPIO_27 MFPR_OFFSET(132)
> +#define GPIO_28 MFPR_OFFSET(133)
> +#define GPIO_29 MFPR_OFFSET(134)
> +#define GPIO_30 MFPR_OFFSET(135)
> +#define GPIO_31 MFPR_OFFSET(136)
> +#define GPIO_32 MFPR_OFFSET(137)
> +#define GPIO_33 MFPR_OFFSET(138)
> +#define GPIO_34 MFPR_OFFSET(139)
> +#define GPIO_35 MFPR_OFFSET(140)
> +#define GPIO_36 MFPR_OFFSET(141)
> +#define GPIO_37 MFPR_OFFSET(142)
> +#define GPIO_38 MFPR_OFFSET(143)
> +#define GPIO_39 MFPR_OFFSET(144)
> +#define GPIO_40 MFPR_OFFSET(145)
> +#define GPIO_41 MFPR_OFFSET(146)
> +#define GPIO_42 MFPR_OFFSET(147)
> +#define GPIO_43 MFPR_OFFSET(148)
> +#define GPIO_44 MFPR_OFFSET(149)
> +#define GPIO_45 MFPR_OFFSET(150)
> +#define GPIO_46 MFPR_OFFSET(151)
> +#define GPIO_47 MFPR_OFFSET(152)
> +#define GPIO_48 MFPR_OFFSET(153)
> +#define GPIO_49 MFPR_OFFSET(154)
> +#define GPIO_50 MFPR_OFFSET(155)
> +#define GPIO_51 MFPR_OFFSET(156)
> +#define GPIO_52 MFPR_OFFSET(157)
> +#define GPIO_53 MFPR_OFFSET(158)
> +#define GPIO_54 MFPR_OFFSET(159)
> +#define GPIO_55 MFPR_OFFSET(160)
> +#define GPIO_56 MFPR_OFFSET(161)
> +#define GPIO_57 MFPR_OFFSET(162)
> +#define GPIO_58 MFPR_OFFSET(163)
> +#define GPIO_59 MFPR_OFFSET(164)
> +#define GPIO_60 MFPR_OFFSET(165)
> +#define GPIO_61 MFPR_OFFSET(166)
> +#define GPIO_62 MFPR_OFFSET(167)
> +#define GPIO_63 MFPR_OFFSET(168)
> +#define GPIO_64 MFPR_OFFSET(169)
> +#define GPIO_65 MFPR_OFFSET(170)
> +#define GPIO_66 MFPR_OFFSET(171)
> +#define GPIO_67 MFPR_OFFSET(172)
> +#define GPIO_68 MFPR_OFFSET(173)
> +#define GPIO_69 MFPR_OFFSET(174)
> +#define GPIO_70 MFPR_OFFSET(175)
> +#define GPIO_71 MFPR_OFFSET(176)
> +#define GPIO_72 MFPR_OFFSET(177)
> +#define GPIO_73 MFPR_OFFSET(178)
> +#define GPIO_74 MFPR_OFFSET(179)
> +#define GPIO_75 MFPR_OFFSET(180)
> +#define GPIO_76 MFPR_OFFSET(181)
> +#define GPIO_77 MFPR_OFFSET(182)
> +#define GPIO_78 MFPR_OFFSET(183)
> +#define GPIO_79 MFPR_OFFSET(184)
> +#define GPIO_80 MFPR_OFFSET(185)
> +#define GPIO_81 MFPR_OFFSET(186)
> +#define GPIO_82 MFPR_OFFSET(187)
> +#define GPIO_83 MFPR_OFFSET(188)
> +#define GPIO_84 MFPR_OFFSET(189)
> +#define GPIO_85 MFPR_OFFSET(190)
> +#define GPIO_86 MFPR_OFFSET(191)
> +#define GPIO_87 MFPR_OFFSET(192)
> +#define GPIO_88 MFPR_OFFSET(193)
> +#define GPIO_89 MFPR_OFFSET(194)
> +#define GPIO_90 MFPR_OFFSET(195)
> +#define GPIO_91 MFPR_OFFSET(196)
> +#define GPIO_92 MFPR_OFFSET(197)
> +#define GPIO_93 MFPR_OFFSET(198)
> +#define GPIO_94 MFPR_OFFSET(199)
> +#define GPIO_95 MFPR_OFFSET(200)
> +#define GPIO_96 MFPR_OFFSET(201)
> +#define GPIO_97 MFPR_OFFSET(202)
> +#define GPIO_98 MFPR_OFFSET(203)
> +#define GPIO_99 MFPR_OFFSET(204)
> +#define GPIO_100 MFPR_OFFSET(205)
> +#define GPIO_101 MFPR_OFFSET(206)
> +#define GPIO_102 MFPR_OFFSET(207)
> +#define GPIO_103 MFPR_OFFSET(208)
> +#define GPIO_104 MFPR_OFFSET(209)
> +#define GPIO_105 MFPR_OFFSET(210)
> +#define GPIO_106 MFPR_OFFSET(211)
> +#define GPIO_107 MFPR_OFFSET(212)
> +#define GPIO_108 MFPR_OFFSET(213)
> +#define GPIO_109 MFPR_OFFSET(214)
> +#define GPIO_110 MFPR_OFFSET(215)
> +#define GPIO_111 MFPR_OFFSET(216)
> +#define GPIO_112 MFPR_OFFSET(217)
> +#define GPIO_113 MFPR_OFFSET(218)
> +#define GPIO_114 MFPR_OFFSET(219)
> +#define GPIO_115 MFPR_OFFSET(220)
> +#define GPIO_116 MFPR_OFFSET(221)
> +#define GPIO_117 MFPR_OFFSET(222)
> +#define GPIO_118 MFPR_OFFSET(223)
> +#define GPIO_119 MFPR_OFFSET(224)
> +#define GPIO_120 MFPR_OFFSET(225)
> +#define GPIO_121 MFPR_OFFSET(226)
> +#define GPIO_122 MFPR_OFFSET(227)
> +#define GPIO_123 MFPR_OFFSET(228)
> +#define GPIO_124 MFPR_OFFSET(229)
> +#define GPIO_125 MFPR_OFFSET(230)
> +#define GPIO_126 MFPR_OFFSET(231)
> +#define GPIO_127 MFPR_OFFSET(232)
> +#endif /* __DTS_ASR8751C_PINFUNC_H */
> --
> 2.7.4
>