Re: [PATCH 1/2] dt-bindings: iio: counter: Add Milbeaut Updown Counter

[Rob Herring]

On Tue, Mar 26, 2019 at 03:33:09PM +0900, Shinji Kanematsu wrote:
> Add documentation for Milbeaut Updown Counter device
> quadrature encoder and counter binding.
> 
> Signed-off-by: Shinji Kanematsu <kanematsu.shinji@xxxxxxxxxxxxx>
> ---
>  .../bindings/iio/counter/milbeaut-updown_cnt.txt   | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt b/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> new file mode 100644
> index 0000000..6771567
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> @@ -0,0 +1,22 @@
> +SOCIONEXT Milbeaut Updown counter
> +
> +Required properties:
> +- compatible:       Must be "socionext,milbeaut-updown-counter".
> +- reg:              Offset and length of the device's register set.
> +- clocks:           Phandle to the clock used by the Updown counter module.
> +- clock-names:      Must be "mux".
> +- interrupts:       SPI number of the device's set.
> +- cms_type:         connected_device
> +                     1: updown button  (updown counter mode)
> +                     2: rotary encoder (phase difference counter mode)

We should have a common property for describing what's attached. 
IIRC, just had a similar binding recently.

> +
> +Example:
> +
> +	updown0: updown@1e002000 {
> +		compatible = "socionext,milbeaut-updown-counter";
> +		reg = <0x1e002000 0x20>;
> +		clocks = <&clk 4>;
> +		clock-names = "mux";
> +		interrupts = <0 104 0x4>;
> +		cms_type = <1>;
> +	};
> -- 
> 1.9.1
>