Re: [PATCH 1/8] fbdev: sm712fb: fix white screen of death on reboot, don't set CR3B-CR3F.

[Sudip Mukherjee]

On Sun, Mar 17, 2019 at 06:24:57AM +0800, Yifeng Li wrote:
> On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
> sm712fb framebuffer driver would cause a white screen of death on
> the next POST, presumably the proper timings for the LCD panel was
> not reprogrammed properly by the BIOS.
> 
> Experiments showed a few CRTC Scratch Registers, including CRT3D,
> CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
> a hardware testing register, we shouldn't mess with it. CRT3C has
> blanking signal and line compare control, which is not needed for this
> driver.
> 
> Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
> registers don't have side-effect on other systems, writing to them is
> also highly questionable.
> 
> Signed-off-by: Yifeng Li <tomli@xxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx  # v4.4+

Tested-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>

--
Regards
Sudip