[PATCH 7/7] irqchip/al-msi: Add ACPI support

From: Hanna Hawa
Date: Sun Mar 31 2019 - 08:36:20 EST


This patch adds ACPI support for AL-MSIx driver.

The AL-MSIx controller is not standard, is not included in the UEFI
specification, and will not be added. The driver ACPI binding is
performed when the following conditions are true:
- OEM ID is AMAZON
- MADT table type is 0x80 (part of the OEM reserved range).

Signed-off-by: Hanna Hawa <hhhawa@xxxxxxxxxx>
Co-developed-by: Vladimir Aerov <vaerov@xxxxxxxxxx>
Signed-off-by: Vladimir Aerov <vaerov@xxxxxxxxxx>
---
drivers/irqchip/irq-al-msi.c | 118 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 111 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-al-msi.c b/drivers/irqchip/irq-al-msi.c
index ec27455..cb80c1e 100644
--- a/drivers/irqchip/irq-al-msi.c
+++ b/drivers/irqchip/irq-al-msi.c
@@ -9,6 +9,7 @@

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

+#include <linux/acpi.h>
#include <linux/dma-iommu.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
@@ -126,14 +127,20 @@ static int al_msix_gic_domain_alloc(struct irq_domain *domain,
struct irq_data *d;
int ret;

- if (!is_of_node(domain->parent->fwnode))
+ if (is_of_node(domain->parent->fwnode)) {
+ fwspec.fwnode = domain->parent->fwnode;
+ fwspec.param_count = 3;
+ fwspec.param[0] = 0;
+ fwspec.param[1] = spi;
+ fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
+ } else if (is_fwnode_irqchip(domain->parent->fwnode)) {
+ fwspec.fwnode = domain->parent->fwnode;
+ fwspec.param_count = 2;
+ fwspec.param[0] = spi + 32;
+ fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
+ } else {
return -EINVAL;
-
- fwspec.fwnode = domain->parent->fwnode;
- fwspec.param_count = 3;
- fwspec.param[0] = 0;
- fwspec.param[1] = spi;
- fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
+ }

ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
if (ret)
@@ -304,3 +311,100 @@ static int al_msix_init(struct device_node *node, struct device_node *parent)
}
IRQCHIP_DECLARE(alpine_msix, "al,alpine-msix", al_msix_init);
IRQCHIP_DECLARE(al_msix, "amazon,al-msix", al_msix_init);
+
+#ifdef CONFIG_ACPI
+static struct al_msix_data *priv;
+
+#define ACPI_AMZN_MADT_OEM_TYPE 0x80
+#define ACPI_AMZN_OEM_ID "AMAZON"
+
+struct acpi_madt_msix_oem_frame {
+ struct acpi_subtable_header header;
+ u64 base_address;
+ u32 base_address_len;
+ u16 spi_count;
+ u16 spi_base;
+};
+
+static struct fwnode_handle *al_msi_get_fwnode(struct device *dev)
+{
+ return priv->msi_domain_handle;
+}
+
+static int __init al_msix_acpi_probe(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct irq_domain *gic_domain;
+ struct fwnode_handle *gic_domain_handle;
+ struct acpi_madt_msix_oem_frame *m;
+ int ret;
+
+ m = container_of(header, struct acpi_madt_msix_oem_frame, header);
+ if (BAD_MADT_ENTRY(m, end))
+ return -EINVAL;
+
+ gic_domain_handle = acpi_get_gsi_domain_id();
+ if (!gic_domain_handle) {
+ pr_err("Failed to find the GIC domain handle\n");
+ return -ENXIO;
+ }
+
+ gic_domain = irq_find_matching_fwnode(gic_domain_handle,
+ DOMAIN_BUS_ANY);
+ if (!gic_domain) {
+ pr_err("Failed to find the GIC domain\n");
+ return -ENXIO;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->spi_first = m->spi_base;
+ priv->num_spis = m->spi_count;
+
+ priv->msi_domain_handle = irq_domain_alloc_fwnode((void *)
+ m->base_address);
+ if (!priv->msi_domain_handle) {
+ pr_err("Unable to allocate msi domain token\n");
+ ret = -EINVAL;
+ goto err_acpi_priv;
+ }
+
+ ret = al_msix_init_common(priv, m->base_address);
+ if (ret)
+ goto err_acpi_priv;
+
+ ret = al_msix_init_domains(priv, gic_domain);
+ if (ret)
+ goto err_acpi_map;
+
+ pci_msi_register_fwnode_provider(&al_msi_get_fwnode);
+
+ return 0;
+
+err_acpi_map:
+ kfree(priv->msi_map);
+err_acpi_priv:
+ kfree(priv);
+ return ret;
+}
+
+static int __init al_msix_acpi_init(void)
+{
+ static struct acpi_table_madt *madt;
+ acpi_status status;
+
+ /* if ACPI MADT table is not Amazon defined return */
+ status = acpi_get_table(ACPI_SIG_MADT, 0,
+ (struct acpi_table_header **)&madt);
+ if (ACPI_FAILURE(status) || (madt && memcmp(madt->header.oem_id,
+ ACPI_AMZN_OEM_ID,
+ ACPI_OEM_ID_SIZE)))
+ return -ENODEV;
+
+ return acpi_table_parse_madt(ACPI_AMZN_MADT_OEM_TYPE,
+ al_msix_acpi_probe, 0);
+}
+early_initcall(al_msix_acpi_init);
+#endif /* CONFIG_ACPI */
--
2.7.4