[PATCH v4 0/5] PCIE support for i.MX8MQ (DT changes)

[Andrey Smirnov]

Everyone:

This series contains all of the i.MX Device Tree changes I made to
enable support of PCIe on i.MX8MQ EVK.

Feedback is welcome!

Changes since [v3]:

    - Added "num-viewport" to PCIE nodes in "arm64: dts: imx8mq: Add
      nodes for PCIe IP blocks"
      
    - Rebased on latest for-next of i.MX tree
    
    - Collected Reviewed-by from Lucas for "arm64: dts: imx8mq-evk:
      Enable PCIE0 interface"

Changes since [v2]:

    - Fixed various nits pointed out by Lucas

    - Collected Acked-by and Reviewed-by from Lucas

    - Moved EVK's WiFi reset pin configuration into a separate pinmux
      entry.

Changes since [v1]:

    - Dropped unsupported IRQ from PCIe nodes (a leftover from vendor tree)

    - Added "pcie_aux" clock and moved clock configuration to board
      file since "pcie_bus" clock is now board specific

Thanks,
Andrey Smirnov

[v1] https://lore.kernel.org/lkml/20190131204333.31846-1-andrew.smirnov@xxxxxxxxx/
[v2] https://lore.kernel.org/lkml/20190208002941.30343-1-andrew.smirnov@xxxxxxxxx
[v3] https://lore.kernel.org/lkml/20190220015857.7136-1-andrew.smirnov@xxxxxxxxx/

Andrey Smirnov (5):
  arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
  arm64: dts: imx8mq: Add a node for SRC IP block
  arm64: dts: imx8mq: Combine PCIE power domains
  arm64: dts: imx8mq: Add nodes for PCIe IP blocks
  arm64: dts: imx8mq-evk: Enable PCIE0 interface

 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi    | 87 +++++++++++++++++++-
 2 files changed, 127 insertions(+), 2 deletions(-)

-- 
2.20.1