[PATCH 5.0 008/146] mac8390: Fix mmio access size probe

[Greg Kroah-Hartman]

5.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>

[ Upstream commit bb9e5c5bcd76f4474eac3baf643d7a39f7bac7bb ]

The bug that Stan reported is as follows. After a restart, a 16-bit NIC
may be incorrectly identified as a 32-bit NIC and stop working.

mac8390 slot.E: Memory length resource not found, probing
mac8390 slot.E: Farallon EtherMac II-C (type farallon)
mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access.

The bug never arises after a cold start and only intermittently after a
warm start. (I didn't investigate why the bug is intermittent.)

It turns out that memcpy_toio() is deprecated and memcmp_withio() also
has issues. Replacing these calls with mmio accessors fixes the problem.

Reported-and-tested-by: Stan Johnson <userm57@xxxxxxxxx>
Fixes: 2964db0f5904 ("m68k: Mac DP8390 update")
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/8390/mac8390.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/8390/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -153,8 +153,6 @@ static void dayna_block_input(struct net
 static void dayna_block_output(struct net_device *dev, int count,
 			       const unsigned char *buf, int start_page);
 
-#define memcmp_withio(a, b, c)	memcmp((a), (void *)(b), (c))
-
 /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
 static void slow_sane_get_8390_hdr(struct net_device *dev,
 				   struct e8390_pkt_hdr *hdr, int ring_page);
@@ -233,19 +231,26 @@ static enum mac8390_type mac8390_ident(s
 
 static enum mac8390_access mac8390_testio(unsigned long membase)
 {
-	unsigned long outdata = 0xA5A0B5B0;
-	unsigned long indata =  0x00000000;
+	u32 outdata = 0xA5A0B5B0;
+	u32 indata = 0;
+
 	/* Try writing 32 bits */
-	memcpy_toio((void __iomem *)membase, &outdata, 4);
-	/* Now compare them */
-	if (memcmp_withio(&outdata, membase, 4) == 0)
+	nubus_writel(outdata, membase);
+	/* Now read it back */
+	indata = nubus_readl(membase);
+	if (outdata == indata)
 		return ACCESS_32;
+
+	outdata = 0xC5C0D5D0;
+	indata = 0;
+
 	/* Write 16 bit output */
 	word_memcpy_tocard(membase, &outdata, 4);
 	/* Now read it back */
 	word_memcpy_fromcard(&indata, membase, 4);
 	if (outdata == indata)
 		return ACCESS_16;
+
 	return ACCESS_UNKNOWN;
 }