Re: [PATCH] mfd: twl-core: disable irq while suspended

[Lee Jones]

On Sat, 23 Feb 2019, Andreas Kemnade wrote:

> Since commit
> 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
> on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
> in i2c-omap.c returns -EACCES.
> [   86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> [   86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
> [   86.555572] Disabling non-boot CPUs ...
> [   86.555664] Successfully put all powerdomains to target state
> [   86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563751] twl4030: I2C error -13 reading PIH ISR
> [   86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563812] twl4030: I2C error -13 reading PIH ISR
> [   86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
> [   86.563903] twl4030: I2C error -13 reading PIH ISR
> 
> This happens when we wakeup via something behing twl4030
> (powerbutton or rtc alarm).
> This goes on for minutes until the system is finally resumed.
> Disable the irq on suspend and enable it on resume to avoid
> having i2c access problems when the irq registers are checked.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  drivers/mfd/twl-core.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

Applied, thanks.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog