[PATCH v5 2/3] platform/chrome: Add Wilco EC keyboard backlight LEDs support

From: Nick Crews
Date: Thu Apr 04 2019 - 13:11:03 EST


The EC is in charge of controlling the keyboard backlight on
the Wilco platform. We expose a standard LED class device at
/sys/class/leds/platform::kbd_backlight. This driver is modeled
after the standard Chrome OS keyboard backlight driver at
drivers/platform/chrome/cros_kbd_led_backlight.c

Some Wilco devices do not support a keyboard backlight. This
is checked via wilco_ec_keyboard_leds_exist() in the core driver,
and a platform_device will only be registered by the core if
a backlight is supported.

After an EC reset the backlight could be in a non-PWM mode.
Earlier in the boot sequence the BIOS should send a command to
the EC to set the brightness, so things **should** be set up,
but we double check in probe() as we query the initial brightness.
If not set up, then set the brightness to 0.

Since the EC will never change the backlight level of its own accord,
we don't need to implement a brightness_get() method.

v5 changes:
-Rename the LED device to "platform::kbd_backlight", to
denote that this is the built-in system keyboard.

v4 changes:
-Call keyboard_led_set_brightness() directly within
initialize_brightness(), instead of calling the library function.

v3 changes:
-Since this behaves the same as the standard Chrome OS keyboard
backlight, rename the led device to "chromeos::kbd_backlight"
-Move wilco_ec_keyboard_backlight_exists() into core module, so
that the core does not depend upon the keyboard backlight driver.
-This required moving some code into wilco-ec.h
-Refactor out some common code in set_brightness() and
initialize_brightness()

v2 changes:
-Remove and fix uses of led vs LED in kconfig
-Assume BIOS initializes brightness, but double check in probe()
-Remove get_brightness() callback, as EC never changes brightness
by itself.
-Use a __packed struct as message instead of opaque array
-Add exported wilco_ec_keyboard_leds_exist() so the core driver
now only creates a platform _device if relevant
-Fix use of keyboard_led_set_brightness() since it can sleep

Signed-off-by: Nick Crews <ncrews@xxxxxxxxxxxx>
Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
---
drivers/platform/chrome/wilco_ec/Kconfig | 9 +
drivers/platform/chrome/wilco_ec/Makefile | 2 +
drivers/platform/chrome/wilco_ec/core.c | 58 ++++++
.../chrome/wilco_ec/kbd_led_backlight.c | 168 ++++++++++++++++++
include/linux/platform_data/wilco-ec.h | 38 ++++
5 files changed, 275 insertions(+)
create mode 100644 drivers/platform/chrome/wilco_ec/kbd_led_backlight.c

diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
index e09e4cebe9b4..d8cf4a60d1b5 100644
--- a/drivers/platform/chrome/wilco_ec/Kconfig
+++ b/drivers/platform/chrome/wilco_ec/Kconfig
@@ -18,3 +18,12 @@ config WILCO_EC_DEBUGFS
manipulation and allow for testing arbitrary commands. This
interface is intended for debug only and will not be present
on production devices.
+
+config WILCO_EC_KBD_BACKLIGHT
+ tristate "Enable keyboard backlight control"
+ depends on WILCO_EC
+ help
+ If you say Y here, you get support to set the keyboard backlight
+ brightness. This happens via a standard LED driver that uses the
+ Wilco EC mailbox interface. A standard LED class device will
+ appear under /sys/class/leds/chromeos::kbd_backlight
diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
index 063e7fb4ea17..8436539813cd 100644
--- a/drivers/platform/chrome/wilco_ec/Makefile
+++ b/drivers/platform/chrome/wilco_ec/Makefile
@@ -4,3 +4,5 @@ wilco_ec-objs := core.o mailbox.o
obj-$(CONFIG_WILCO_EC) += wilco_ec.o
wilco_ec_debugfs-objs := debugfs.o
obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o
+wilco_kbd_backlight-objs := kbd_led_backlight.o
+obj-$(CONFIG_WILCO_EC_KBD_BACKLIGHT) += wilco_kbd_backlight.o
diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
index 05e1e2be1c91..3c45c157b7da 100644
--- a/drivers/platform/chrome/wilco_ec/core.c
+++ b/drivers/platform/chrome/wilco_ec/core.c
@@ -38,11 +38,47 @@ static struct resource *wilco_get_resource(struct platform_device *pdev,
dev_name(dev));
}

+/**
+ * wilco_ec_keyboard_backlight_exists() - Is the keyboad backlight supported?
+ * @ec: EC device to query.
+ * @exists: Return value to fill in.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int wilco_ec_keyboard_backlight_exists(struct wilco_ec_device *ec,
+ bool *exists)
+{
+ struct wilco_ec_kbbl_msg request;
+ struct wilco_ec_kbbl_msg response;
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_FEATURES;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = &request;
+ msg.request_size = sizeof(request);
+ msg.response_data = &response;
+ msg.response_size = sizeof(response);
+
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ return ret;
+
+ *exists = response.status != 0xFF;
+
+ return 0;
+}
+
static int wilco_ec_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct wilco_ec_device *ec;
int ret;
+ bool kbbl_exists;

ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
if (!ec)
@@ -89,8 +125,29 @@ static int wilco_ec_probe(struct platform_device *pdev)
goto unregister_debugfs;
}

+ /* Register child dev to be found by the keyboard backlight driver. */
+ ret = wilco_ec_keyboard_backlight_exists(ec, &kbbl_exists);
+ if (ret) {
+ dev_err(ec->dev,
+ "Failed checking keyboard backlight support: %d", ret);
+ goto unregister_rtc;
+ }
+ if (kbbl_exists) {
+ ec->kbbl_pdev = platform_device_register_data(dev,
+ "wilco-kbd-backlight",
+ PLATFORM_DEVID_AUTO, NULL, 0);
+ if (IS_ERR(ec->kbbl_pdev)) {
+ dev_err(dev,
+ "Failed to create keyboard backlight pdev\n");
+ ret = PTR_ERR(ec->kbbl_pdev);
+ goto unregister_rtc;
+ }
+ }
+
return 0;

+unregister_rtc:
+ platform_device_unregister(ec->rtc_pdev);
unregister_debugfs:
if (ec->debugfs_pdev)
platform_device_unregister(ec->debugfs_pdev);
@@ -102,6 +159,7 @@ static int wilco_ec_remove(struct platform_device *pdev)
{
struct wilco_ec_device *ec = platform_get_drvdata(pdev);

+ platform_device_unregister(ec->kbbl_pdev);
platform_device_unregister(ec->rtc_pdev);
if (ec->debugfs_pdev)
platform_device_unregister(ec->debugfs_pdev);
diff --git a/drivers/platform/chrome/wilco_ec/kbd_led_backlight.c b/drivers/platform/chrome/wilco_ec/kbd_led_backlight.c
new file mode 100644
index 000000000000..8fa4b10b6392
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/kbd_led_backlight.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keyboard backlight LED driver for the Wilco Embedded Controller
+ *
+ * Copyright 2019 Google LLC
+ *
+ * The EC is in charge of controlling the keyboard backlight on
+ * the Wilco platform. We expose a standard LED class device at
+ * /sys/class/leds/platform::kbd_backlight. Power Manager normally
+ * controls the backlight by writing a percentage in range [0, 100]
+ * to the brightness property. This driver is modeled after the
+ * standard Chrome OS keyboard backlight driver at
+ * drivers/platform/chrome/cros_kbd_led_backlight.c
+ *
+ * Some Wilco devices do not support a keyboard backlight. This
+ * is checked via wilco_ec_keyboard_backlight_exists() in the core driver,
+ * and a platform_device will only be registered by the core if
+ * a backlight is supported.
+ *
+ * After an EC reset the backlight could be in a non-PWM mode.
+ * Earlier in the boot sequence the BIOS should send a command to
+ * the EC to set the brightness, so things **should** be set up,
+ * but we double check in probe() as we query the initial brightness.
+ * If not set up, then we set the brightness to KBBL_DEFAULT_BRIGHTNESS.
+ *
+ * Since the EC will never change the backlight level of its own accord,
+ * we don't need to implement a brightness_get() method.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "wilco-kbd-backlight"
+
+#define KBBL_DEFAULT_BRIGHTNESS 0
+
+struct wilco_keyboard_led_data {
+ struct wilco_ec_device *ec;
+ struct led_classdev keyboard;
+};
+
+/* Send a request, get a response, and check that the response is good. */
+static int send_kbbl_msg(struct wilco_ec_device *ec,
+ const struct wilco_ec_kbbl_msg *request,
+ struct wilco_ec_kbbl_msg *response)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = &request;
+ msg.request_size = sizeof(request);
+ msg.response_data = &response;
+ msg.response_size = sizeof(response);
+
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ dev_err(ec->dev, "Failed sending brightness command: %d", ret);
+
+ if (response->status) {
+ dev_err(ec->dev,
+ "EC reported failure sending brightness command: %d",
+ response->status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* This may sleep because it uses wilco_ec_mailbox() */
+static int keyboard_led_set_brightness(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct wilco_ec_kbbl_msg request;
+ struct wilco_ec_kbbl_msg response;
+ struct wilco_keyboard_led_data *data;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_STATE;
+ request.mode = WILCO_KBBL_MODE_FLAG_PWM;
+ request.percent = brightness;
+
+ data = container_of(cdev, struct wilco_keyboard_led_data, keyboard);
+ return send_kbbl_msg(data->ec, &request, &response);
+}
+
+/*
+ * Get the current brightness, ensuring that we are in PWM mode. If not
+ * in PWM mode, then the current brightness is meaningless, so set the
+ * brightness to KBBL_DEFAULT_BRIGHTNESS.
+ *
+ * Return: Final brightness of the keyboard, or negative error code on failure.
+ */
+static int initialize_brightness(struct wilco_keyboard_led_data *data)
+{
+ struct wilco_ec_kbbl_msg request;
+ struct wilco_ec_kbbl_msg response;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_STATE;
+
+ ret = send_kbbl_msg(data->ec, &request, &response);
+ if (ret < 0)
+ return ret;
+
+ if (response.mode & WILCO_KBBL_MODE_FLAG_PWM)
+ return response.percent;
+
+ dev_warn(data->ec->dev, "Keyboard brightness not initialized by BIOS");
+ ret = keyboard_led_set_brightness(&data->keyboard,
+ KBBL_DEFAULT_BRIGHTNESS);
+ if (ret < 0)
+ return ret;
+
+ return KBBL_DEFAULT_BRIGHTNESS;
+}
+
+static int keyboard_led_probe(struct platform_device *pdev)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+ struct wilco_keyboard_led_data *data;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->ec = ec;
+ /* This acts the same as the CrOS backlight, so use the same name */
+ data->keyboard.name = "platform::kbd_backlight";
+ data->keyboard.max_brightness = 100;
+ data->keyboard.flags = LED_CORE_SUSPENDRESUME;
+ data->keyboard.brightness_set_blocking = keyboard_led_set_brightness;
+ ret = initialize_brightness(data);
+ if (ret < 0)
+ return ret;
+ data->keyboard.brightness = ret;
+
+ ret = devm_led_classdev_register(&pdev->dev, &data->keyboard);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static struct platform_driver keyboard_led_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = keyboard_led_probe,
+};
+module_platform_driver(keyboard_led_driver);
+
+MODULE_AUTHOR("Nick Crews <ncrews@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Wilco keyboard backlight LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
index 1ff224793c99..c3965b7f397d 100644
--- a/include/linux/platform_data/wilco-ec.h
+++ b/include/linux/platform_data/wilco-ec.h
@@ -32,6 +32,7 @@
* @data_size: Size of the data buffer used for EC communication.
* @debugfs_pdev: The child platform_device used by the debugfs sub-driver.
* @rtc_pdev: The child platform_device used by the RTC sub-driver.
+ * @kbbl_pdev: The child pdev used by the keyboard backlight sub-driver.
*/
struct wilco_ec_device {
struct device *dev;
@@ -43,6 +44,7 @@ struct wilco_ec_device {
size_t data_size;
struct platform_device *debugfs_pdev;
struct platform_device *rtc_pdev;
+ struct platform_device *kbbl_pdev;
};

/**
@@ -114,6 +116,42 @@ struct wilco_ec_message {
void *response_data;
};

+/* Constants and structs useful for keyboard backlight (KBBL) control */
+
+#define WILCO_EC_COMMAND_KBBL 0x75
+#define WILCO_KBBL_MODE_FLAG_PWM BIT(1) /* Set brightness by percent. */
+
+/**
+ * enum kbbl_subcommand - What action does the EC perform?
+ * @WILCO_KBBL_SUBCMD_GET_FEATURES: Request available functionality from EC.
+ * @WILCO_KBBL_SUBCMD_GET_STATE: Request current mode and brightness from EC.
+ * @WILCO_KBBL_SUBCMD_SET_STATE: Write mode and brightness to EC.
+ */
+enum kbbl_subcommand {
+ WILCO_KBBL_SUBCMD_GET_FEATURES = 0x00,
+ WILCO_KBBL_SUBCMD_GET_STATE = 0x01,
+ WILCO_KBBL_SUBCMD_SET_STATE = 0x02,
+};
+
+/**
+ * struct wilco_ec_kbbl_msg - Message to/from EC for keyboard backlight control.
+ * @command: Always WILCO_EC_COMMAND_KBBL.
+ * @status: Set by EC to 0 on success, 0xFF on failure.
+ * @subcmd: One of enum kbbl_subcommand.
+ * @mode: Bit flags for used mode, we want to use WILCO_KBBL_MODE_FLAG_PWM.
+ * @percent: Brightness in 0-100. Only meaningful in PWM mode.
+ */
+struct wilco_ec_kbbl_msg {
+ u8 command;
+ u8 status;
+ u8 subcmd;
+ u8 reserved3;
+ u8 mode;
+ u8 reserved5to8[4];
+ u8 percent;
+ u8 reserved10to15[6];
+} __packed;
+
/**
* wilco_ec_mailbox() - Send request to the EC and receive the response.
* @ec: Wilco EC device.
--
2.20.1