Re: [PATCH 2/4] ARM: dts: omap4-droid4: Update backlight dt properties

From: Jacek Anaszewski
Date: Sun Apr 07 2019 - 14:31:14 EST


On 4/5/19 12:00 AM, Tony Lindgren wrote:
* Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx> [190404 20:12]:
Tony,

On 3/21/19 3:28 PM, Dan Murphy wrote:
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---

v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/

v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..aea206f04f76 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@
};
&i2c1 {
- lm3532@38 {
+ led-controller@38 {
compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x38>;
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- lcd_backlight: backlight {
- compatible = "ti,lm3532-backlight";
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <1>;
- ramp-down-msec = <0>;
- };

Since I'll be creating integration branch for this series,
and it would be good to have this patch in it too, then
I can do the amendments by myself:

+ lcd_backlight: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = "backlight";

s/backlight/:backlight/

+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = "platform::kbd_backlight";

s/platform::kbd_backlight/:kbd_backlight/

Yes makes sense to me.

and then send you a pull request.

Would you be OK with that?

Sure go for it. Here's my ack for the changes:

Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>

And then for the one liner to fold in below:

Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>

8< -------------
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -214,7 +214,6 @@
width-mm = <50>;
height-mm = <89>;
- backlight = <&lcd_backlight>;
panel-timing {
clock-frequency = <0>; /* Calculated by dsi */


Folded in, thanks. Beside that, I also removed lcd_backlight DT
labels from both DT bindings and dts, since it is now unused
and misleading.

--
Best regards,
Jacek Anaszewski