[PATCH v4 0/6] Add Beelink GS1

[ClÃment PÃron]

Thanks to Jagan and Icenowy, most of this device-tree is taken from their works
on the Orange Pi One Plus and Pine H64.

PLEASE NOTE that I don't own an OrangePi nor a Pine H64 and PIO regulators for
these board has not been tested !
Please add a tested-by on these commits 5 and 6 before merging it.

Changes in v4 (Thanks to Maxime Ripard):
 - fix incorrect mmc_pins label
 - remove default rx/tr timing in emac
 - consistency in commit titles

Changes in v3 (Thanks to Maxime Ripard):
 - remove PL regulator
 - separate patch for sunxi.yaml
 - collect reviewed-by

Changes in v2 (Thanks to Maxime Ripard):
 - move MMC pinctrl to SOC dtsi
 - add board to Sunxi YAML file
 - add PIO/R_PIO regulators
 - remove always_on from SDIO regulators

ClÃment PÃron (6):
  arm64: dts: allwinner: h6: move MMC pinctrl to dtsi
  dt-bindings: vendor-prefixes: add AZW
  arm64: dts: allwinner: h6: Introduce Beelink GS1 board
  dt-bindings: arm: sunxi: Add Beelink GS1 board
  arm64: dts: allwinner: h6: orangepi: Add PIO regulators
  arm64: dts: allwinner: h6: pine64: Add PIO regulators

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 .../devicetree/bindings/vendor-prefixes.txt   |   1 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   | 260 ++++++++++++++++++
 .../dts/allwinner/sun50i-h6-orangepi.dtsi     |  19 +-
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  21 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   4 +
 7 files changed, 305 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

-- 
2.17.1