Re: [PATCH v3 1/9] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA

[Shawn Guo]

On Thu, Mar 28, 2019 at 11:49:16PM -0700, Andrey Smirnov wrote:
> Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
> clock to determine if it needs to configure the IP block as operating
> at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
> clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
> ratio is 1:1 which results in broken SDMA funtionality(this at least
> breaks RAVE SP serdev driver on RDU2). Fix the code to specify
> IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect
> clock ratio.
> 
> Fixes: 25aaa75df1e6 ("dmaengine: imx-sdma: add clock ratio 1:1 check")

Since we have a fix in the dma driver, I dropped the Fixes tag here.

Applied all, thanks.

Shawn

> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Angus Ainslie (Purism) <angus@xxxxxxxx>
> Cc: Chris Healy <cphealy@xxxxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 9f9aa6e7ed0e..354feba077b2 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -949,7 +949,7 @@
>  				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
>  				reg = <0x020ec000 0x4000>;
>  				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
> -				clocks = <&clks IMX6QDL_CLK_SDMA>,
> +				clocks = <&clks IMX6QDL_CLK_IPG>,
>  					 <&clks IMX6QDL_CLK_SDMA>;
>  				clock-names = "ipg", "ahb";
>  				#dma-cells = <3>;
> -- 
> 2.20.1
>