Re: [RESEND][PATCH v2] firmware/psci: add support for SYSTEM_RESET2

[Aaro Koskinen]

Hi,

On Thu, Apr 11, 2019 at 05:49:36PM +0100, Sudeep Holla wrote:
> On Thu, Apr 11, 2019 at 11:42:28AM +0000, Koskinen, Aaro (Nokia - FI/Espoo) wrote:
> > From: Sudeep Holla [sudeep.holla@xxxxxxx]:
> > >  static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd)
> > >  {
> > > +       if ((reboot_mode == REBOOT_WARM || reboot_mode == REBOOT_SOFT) &&
> > 
> > I would omit the REBOOT_SOFT here.
> 
> I included REBOOT_SOFT for 2 reasons:
> 1. drivers/firmware/efi/reboot.c - efi_reboot treats WARM and SOFT reboots same
> 2. If the vendors specific reboots are added and handled in EFI, I assume it
>    will be categorised under REBOOT_SOFT.
> 
> If that's wrong I can drop REBOOT_SOFT.

Not a big issue, but it's just unclear what SOFT means. WARM at least maps
nicely to the PSCI spec.

> > > +           psci_system_reset2_supported)
> > > +               /*
> > > +                * reset_type[31] = 0 (architectural)
> > > +                * reset_type[30:0] = 0 (SYSTEM_WARM_RESET)
> > > +                * cookie = 0 (ignored by the implementation)
> > > +                */
> > > +               invoke_psci_fn(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2), 0, 0, 0);
> > > +
> > >        invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
> >
> > Use else here, so that we fall back to system halt if SYSTEM_RESET2 fails.
> 
> Will that not change current behaviour ? IOW, is that expected behaviour ?
> I am not sure if halt can be prefer over cold reboot in absence of warm/soft
> reboot when the system is request to reboot. From PSCI perspective, since
> SYSTEM_RESET is mandatory I prefer that unless Linux has any restriction
> on this behaviour.

Hmm, so does it mean that even if firmware tells that SYSTEM_RESET2
is implemented it does not imply that SYSTEM_WARM_RESET is
available? I.e. the firmware could choose to implement only some
vendor-specific resets but not architectural ones. In that case, could
we fall back to cold reset only if NOT_SUPPORTED is returned? My point
is that if the warm reset fails unexpectedly, we should halt the system
like we do if the cold reset fails.

A.