[PATCH] media: remove redundant 'default n' from Kconfig-s

From: Bartlomiej Zolnierkiewicz
Date: Fri Apr 12 2019 - 06:27:47 EST


'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:

config FOO
bool

config FOO
bool
default n

With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/media/Kconfig | 3 ---
drivers/media/dvb-core/Kconfig | 3 ---
drivers/media/dvb-frontends/Kconfig | 1 -
drivers/media/pci/ddbridge/Kconfig | 1 -
drivers/media/pci/dt3155/Kconfig | 1 -
drivers/media/pci/ivtv/Kconfig | 2 --
drivers/media/platform/Kconfig | 12 ------------
drivers/media/platform/omap/Kconfig | 1 -
drivers/media/platform/vicodec/Kconfig | 1 -
drivers/media/platform/vimc/Kconfig | 1 -
drivers/media/platform/vivid/Kconfig | 1 -
drivers/media/radio/Kconfig | 1 -
drivers/media/usb/s2255/Kconfig | 1 -
drivers/media/v4l2-core/Kconfig | 2 --
14 files changed, 31 deletions(-)

Index: b/drivers/media/Kconfig
===================================================================
--- a/drivers/media/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/Kconfig 2019-04-12 12:18:15.474149388 +0200
@@ -113,7 +113,6 @@ config MEDIA_CONTROLLER_DVB
config MEDIA_CONTROLLER_REQUEST_API
bool "Enable Media controller Request API (EXPERIMENTAL)"
depends on MEDIA_CONTROLLER && STAGING_MEDIA
- default n
help
DO NOT ENABLE THIS OPTION UNLESS YOU KNOW WHAT YOU'RE DOING.

@@ -163,7 +162,6 @@ config DVB_MMAP
depends on DVB_CORE
depends on VIDEO_V4L2=y || VIDEO_V4L2=DVB_CORE
select VIDEOBUF2_VMALLOC
- default n
help
This option enables DVB experimental memory-mapped API, which
reduces the number of context switches to read DVB buffers, as
@@ -189,7 +187,6 @@ config DVB_NET
config TTPCI_EEPROM
tristate
depends on I2C
- default n

source "drivers/media/dvb-core/Kconfig"

Index: b/drivers/media/dvb-core/Kconfig
===================================================================
--- a/drivers/media/dvb-core/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/dvb-core/Kconfig 2019-04-12 12:17:55.898148895 +0200
@@ -18,7 +18,6 @@ config DVB_MAX_ADAPTERS
config DVB_DYNAMIC_MINORS
bool "Dynamic DVB minor allocation"
depends on DVB_CORE
- default n
help
If you say Y here, the DVB subsystem will use dynamic minor
allocation for any device that uses the DVB major number.
@@ -31,7 +30,6 @@ config DVB_DYNAMIC_MINORS
config DVB_DEMUX_SECTION_LOSS_LOG
bool "Enable DVB demux section packet loss log"
depends on DVB_CORE
- default n
help
Enable extra log messages meant to detect packet loss
inside the Kernel.
@@ -44,7 +42,6 @@ config DVB_DEMUX_SECTION_LOSS_LOG
config DVB_ULE_DEBUG
bool "Enable DVB net ULE packet debug messages"
depends on DVB_CORE
- default n
help
Enable extra log messages meant to detect problems while
handling DVB network ULE packet loss inside the Kernel.
Index: b/drivers/media/dvb-frontends/Kconfig
===================================================================
--- a/drivers/media/dvb-frontends/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/dvb-frontends/Kconfig 2019-04-12 12:17:55.914148895 +0200
@@ -945,5 +945,4 @@ comment "Tools to develop new frontends"
config DVB_DUMMY_FE
tristate "Dummy frontend driver"
depends on DVB_CORE
- default n
endmenu
Index: b/drivers/media/pci/ddbridge/Kconfig
===================================================================
--- a/drivers/media/pci/ddbridge/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/pci/ddbridge/Kconfig 2019-04-12 12:21:18.146153988 +0200
@@ -35,7 +35,6 @@ config DVB_DDBRIDGE_MSIENABLE
bool "Enable Message Signaled Interrupts (MSI) per default (EXPERIMENTAL)"
depends on DVB_DDBRIDGE
depends on PCI_MSI
- default n
help
Use PCI MSI (Message Signaled Interrupts) per default. Enabling this
might lead to I2C errors originating from the bridge in conjunction
Index: b/drivers/media/pci/dt3155/Kconfig
===================================================================
--- a/drivers/media/pci/dt3155/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/pci/dt3155/Kconfig 2019-04-12 12:21:01.678153573 +0200
@@ -2,7 +2,6 @@ config VIDEO_DT3155
tristate "DT3155 frame grabber"
depends on PCI && VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_DMA_CONTIG
- default n
help
Enables dt3155 device driver for the DataTranslation DT3155 frame grabber.
Say Y here if you have this hardware.
Index: b/drivers/media/pci/ivtv/Kconfig
===================================================================
--- a/drivers/media/pci/ivtv/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/pci/ivtv/Kconfig 2019-04-12 12:21:37.202154468 +0200
@@ -31,7 +31,6 @@ config VIDEO_IVTV
config VIDEO_IVTV_DEPRECATED_IOCTLS
bool "enable the DVB ioctls abuse on ivtv driver"
depends on VIDEO_IVTV
- default n
help
Enable the usage of the a DVB set of ioctls that were abused by
IVTV driver for a while.
@@ -76,7 +75,6 @@ config VIDEO_FB_IVTV
config VIDEO_FB_IVTV_FORCE_PAT
bool "force cx23415 framebuffer init with x86 PAT enabled"
depends on VIDEO_FB_IVTV && X86_PAT
- default n
help
With PAT enabled, the cx23415 framebuffer driver does not
utilize write-combined caching on the framebuffer memory.
Index: b/drivers/media/platform/Kconfig
===================================================================
--- a/drivers/media/platform/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/platform/Kconfig 2019-04-12 12:19:20.390151022 +0200
@@ -5,7 +5,6 @@
menuconfig V4L_PLATFORM_DRIVERS
bool "V4L platform devices"
depends on MEDIA_CAMERA_SUPPORT
- default n
help
Say Y here to enable support for platform-specific V4L drivers.

@@ -154,7 +153,6 @@ config VIDEO_TI_CAL
depends on SOC_DRA7XX || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
- default n
help
Support for the TI CAL (Camera Adaptation Layer) block
found on DRA72X SoC.
@@ -167,7 +165,6 @@ menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
depends on VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
- default n
help
Say Y here to enable selecting drivers for V4L devices that
use system memory for both source and destination buffers, as opposed
@@ -235,7 +232,6 @@ config VIDEO_MEDIATEK_MDP
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
- default n
help
It is a v4l2 driver and present in Mediatek MT8173 SoCs.
The driver supports for scaling and color space conversion.
@@ -251,7 +247,6 @@ config VIDEO_MEDIATEK_VCODEC
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
select VIDEO_MEDIATEK_VPU
- default n
help
Mediatek video codec driver provides HW capability to
encode and decode in a range of video formats
@@ -275,7 +270,6 @@ config VIDEO_SAMSUNG_S5P_G2D
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- default n
help
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
2d graphics accelerator.
@@ -295,7 +289,6 @@ config VIDEO_SAMSUNG_S5P_MFC
depends on VIDEO_DEV && VIDEO_V4L2
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
- default n
help
MFC 5.1 and 6.x driver for V4L2

@@ -458,7 +451,6 @@ config VIDEO_ROCKCHIP_RGA
depends on ARCH_ROCKCHIP || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select V4L2_MEM2MEM_DEV
- default n
help
This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator.
Rockchip RGA is a separate 2D raster graphic acceleration unit.
@@ -476,7 +468,6 @@ config VIDEO_TI_VPE
select VIDEO_TI_VPDMA
select VIDEO_TI_SC
select VIDEO_TI_CSC
- default n
help
Support for the TI VPE(Video Processing Engine) block
found on DRA7XX SoC.
@@ -529,7 +520,6 @@ config VIDEO_VIM2M
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
- default n
help
This is a virtual test device for the memory-to-memory driver
framework.
@@ -541,7 +531,6 @@ endif #V4L_TEST_DRIVERS
menuconfig DVB_PLATFORM_DRIVERS
bool "DVB platform devices"
depends on MEDIA_DIGITAL_TV_SUPPORT
- default n
help
Say Y here to enable support for platform-specific Digital TV drivers.

@@ -661,7 +650,6 @@ endif #CEC_PLATFORM_DRIVERS
menuconfig SDR_PLATFORM_DRIVERS
bool "SDR platform devices"
depends on MEDIA_SDR_SUPPORT
- default n
help
Say Y here to enable support for platform-specific SDR Drivers.

Index: b/drivers/media/platform/omap/Kconfig
===================================================================
--- a/drivers/media/platform/omap/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/platform/omap/Kconfig 2019-04-12 12:19:52.510151831 +0200
@@ -13,6 +13,5 @@ config VIDEO_OMAP2_VOUT
select VIDEOBUF_DMA_CONTIG
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
select FRAME_VECTOR
- default n
help
V4L2 Display driver support for OMAP2/3 based boards.
Index: b/drivers/media/platform/vicodec/Kconfig
===================================================================
--- a/drivers/media/platform/vicodec/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/platform/vicodec/Kconfig 2019-04-12 12:17:55.926148895 +0200
@@ -3,7 +3,6 @@ config VIDEO_VICODEC
depends on VIDEO_DEV && VIDEO_V4L2
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
- default n
help
Driver for a Virtual Codec

Index: b/drivers/media/platform/vimc/Kconfig
===================================================================
--- a/drivers/media/platform/vimc/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/platform/vimc/Kconfig 2019-04-12 12:21:54.838154912 +0200
@@ -3,7 +3,6 @@ config VIDEO_VIMC
depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_VMALLOC
select VIDEO_V4L2_TPG
- default n
help
Skeleton driver for Virtual Media Controller

Index: b/drivers/media/platform/vivid/Kconfig
===================================================================
--- a/drivers/media/platform/vivid/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/platform/vivid/Kconfig 2019-04-12 12:22:10.306155301 +0200
@@ -10,7 +10,6 @@ config VIDEO_VIVID
select VIDEOBUF2_VMALLOC
select VIDEOBUF2_DMA_CONTIG
select VIDEO_V4L2_TPG
- default n
help
Enables a virtual video driver. This driver emulates a webcam,
TV, S-Video and HDMI capture hardware, including VBI support for
Index: b/drivers/media/radio/Kconfig
===================================================================
--- a/drivers/media/radio/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/radio/Kconfig 2019-04-12 12:20:31.598152816 +0200
@@ -232,7 +232,6 @@ source "drivers/media/radio/wl128x/Kconf
menuconfig V4L_RADIO_ISA_DRIVERS
bool "ISA radio devices"
depends on ISA || COMPILE_TEST
- default n
help
Say Y here to enable support for these ISA drivers.

Index: b/drivers/media/usb/s2255/Kconfig
===================================================================
--- a/drivers/media/usb/s2255/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/usb/s2255/Kconfig 2019-04-12 12:17:55.942148896 +0200
@@ -2,7 +2,6 @@ config USB_S2255
tristate "USB Sensoray 2255 video capture device"
depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
- default n
help
Say Y here if you want support for the Sensoray 2255 USB device.
This driver can be compiled as a module, called s2255drv.
Index: b/drivers/media/v4l2-core/Kconfig
===================================================================
--- a/drivers/media/v4l2-core/Kconfig 2019-04-12 12:17:55.946148896 +0200
+++ b/drivers/media/v4l2-core/Kconfig 2019-04-12 12:20:48.182153233 +0200
@@ -12,7 +12,6 @@ config VIDEO_V4L2

config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality on V4L2 drivers"
- default n
help
Say Y here to enable advanced debugging functionality on some
V4L devices.
@@ -20,7 +19,6 @@ config VIDEO_ADV_DEBUG

config VIDEO_FIXED_MINOR_RANGES
bool "Enable old-style fixed minor ranges on drivers/video devices"
- default n
help
Say Y here to enable the old-style fixed-range minor assignments.
Only useful if you rely on the old behavior and use mknod instead of udev.