Re: [PATCH v4 0/6] ARM: davinci: ohci-da8xx: model the vbus GPIO as a fixed regulator

[Sekhar Nori]

On 11/04/19 3:00 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> 
> Historically the power supply management in this driver has been handled
> in two separate places in parallel. Device-tree users simply defined an
> appropriate regulator, while two boards with no DT support (da830-evm and
> omapl138-hawk) passed functions defined in their respective board files
> over platform data. These functions simply used legacy GPIO calls to
> watch the oc GPIO for interrupts and disable the vbus GPIO when the irq
> fires.
> 
> Commit d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios")
> updated these GPIO calls to the modern API and moved them inside the
> driver.
> 
> This however is not the optimal solution for the vbus GPIO as it
> duplicates code. Instead we should model the GPIO as a fixed regulator
> that can be controlled with a GPIO.
> 
> This series adds fixed regulators for all users of vbus GPIO, adds
> overcurrent protection using the existing vbus regulator in the USB
> driver and removes the vbus GPIO calls once they're no longer used.
> 
> Tested on da830-evm with the module both built-in and loadable.

Looks good to me except some minor issues pointed out. If you can spin
the next version quickly, I would try merging for v5.2

Thanks,
Sekhar