[PATCH 1/2] rtc: ds1685: remove dead code
From: Thomas Bogendoerfer
Date: Tue Apr 16 2019 - 05:34:15 EST
ds1685_rtc_begin_ctrl_access/ds1685_rtc_end_ctrl_access aren't used,
so get rid of it.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
---
drivers/rtc/rtc-ds1685.c | 36 ------------------------------------
1 file changed, 36 deletions(-)
diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 2f5194df239e..33781be58f16 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -192,42 +192,6 @@ ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
}
/**
- * ds1685_rtc_begin_ctrl_access - prepare the rtc for ctrl access.
- * @rtc: pointer to the ds1685 rtc structure.
- * @flags: irq flags variable for spin_lock_irqsave.
- *
- * This takes several steps to prepare the rtc for access to read just the
- * control registers:
- * - Sets a spinlock on the rtc IRQ.
- * - Switches the rtc to bank 1. This allows access to the two extended
- * control registers.
- *
- * Only use this where you are certain another lock will not be held.
- */
-static inline void
-ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long *flags)
-{
- spin_lock_irqsave(&rtc->lock, *flags);
- ds1685_rtc_switch_to_bank1(rtc);
-}
-
-/**
- * ds1685_rtc_end_ctrl_access - end ctrl access on the rtc.
- * @rtc: pointer to the ds1685 rtc structure.
- * @flags: irq flags variable for spin_unlock_irqrestore.
- *
- * This ends what was started by ds1685_rtc_begin_ctrl_access:
- * - Switches the rtc back to bank 0.
- * - Unsets the spinlock on the rtc IRQ.
- */
-static inline void
-ds1685_rtc_end_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
-{
- ds1685_rtc_switch_to_bank0(rtc);
- spin_unlock_irqrestore(&rtc->lock, flags);
-}
-
-/**
* ds1685_rtc_get_ssn - retrieve the silicon serial number.
* @rtc: pointer to the ds1685 rtc structure.
* @ssn: u8 array to hold the bits of the silicon serial number.
--
2.13.7