Re: [PATCH 1/2] mtd: spi-nor: Move m25p80 code in spi-nor.c
From: Vignesh Raghavendra
Date: Tue Apr 16 2019 - 09:55:06 EST
Hi Tudor,
On 15/04/19 1:43 PM, Tudor.Ambarus@xxxxxxxxxxxxx wrote:
> Hi,
>
> The general approach looks good, few comments below.
>
> On 04/09/2019 07:26 PM, Vignesh Raghavendra wrote:
>> External E-Mail
>>
>>
>> From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
>>
>> The m25p80 driver is actually a generic wrapper around the spi-mem
>> layer. Not only the driver name is misleading, but we'd expect such a
>> common logic to be directly available in the core. Another reason for
>> moving this code is that SPI NOR controller drivers should
>> progressively be replaced by SPI controller drivers implementing the
>> spi_mem_ops interface, and when the conversion is done, we should have
>> a single spi-nor driver directly interfacing with the spi-mem layer.
>>
>> While moving the code we also fix a longstanding issue when
>> non-DMA-able buffers are passed by the MTD layer.
>>
>> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
>> [vigneshr@xxxxxx: use devm_kmalloc() for bounce buffer allocation]
>> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
>> ---
>> Changes from RFC:
>> * Use devm_kmalloc() for bounce buffer allocation as it supports cache
>> line aligned buffers now
>
> then spi-nand has to be updated too.
>
Yes, but as a separate patch I presume.
[...]
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index 73172d7f512b..03c8c346c9ae 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -19,6 +19,7 @@
>>
>> #include <linux/mtd/mtd.h>
>> #include <linux/of_platform.h>
>> +#include <linux/sched/task_stack.h>
>> #include <linux/spi/flash.h>
>> #include <linux/mtd/spi-nor.h>
>>
>> @@ -288,6 +289,174 @@ struct flash_info {
>>
>> #define JEDEC_MFR(info) ((info)->id[0])
>>
>> +static int spi_nor_exec_op(struct spi_nor *nor, struct spi_mem_op *op,
>> + u64 *addr, void *buf, unsigned int len)
>
> size_t for len?
>
Right will fix throughout.
I am also thinking of updating op.data.nbytes to size_t type in
spi-mem.h (and also spi_mem_dirmap_info->length) as part of a separate
patch.
>> +{
>> + int ret;
>> + bool usebouncebuf;
>> +
>> + if (!op || (len && !buf))
>> + return -EINVAL;
>> +
>> + if (op->addr.nbytes && addr)
>> + op->addr.val = *addr;
>> +
>> + op->data.nbytes = len;
>> +
>> + if (object_is_on_stack(buf) || !virt_addr_valid(buf))
>> + usebouncebuf = true;
>> + if (len && usebouncebuf) {
>> + if (len > nor->bouncebuf_size)
>> + return -ENOTSUPP;
>> +
>> + if (op->data.dir == SPI_MEM_DATA_IN) {
>> + op->data.buf.in = nor->bouncebuf;
>> + } else {
>> + op->data.buf.out = nor->bouncebuf;
>> + memcpy(nor->bouncebuf, buf, len);
>> + }
>> + } else {
>> + op->data.buf.out = buf;
>> + }
>> +
>> + ret = spi_mem_exec_op(nor->spimem, op);
>> + if (ret)
>> + return ret;
>> +
>> + if (usebouncebuf && len && op->data.dir == SPI_MEM_DATA_IN)
>> + memcpy(buf, nor->bouncebuf, len);
>> +
>> + return 0;
>> +}
>> +
>> +static int spi_nor_data_op(struct spi_nor *nor, struct spi_mem_op *op,
>> + void *buf, unsigned int len)
>
> size_t for len?
>
Ok
>> +{
>> + return spi_nor_exec_op(nor, op, NULL, buf, len);
>> +}
>> +
>> +static int spi_nor_nodata_op(struct spi_nor *nor, struct spi_mem_op *op)
>> +{
>> + return spi_nor_exec_op(nor, op, NULL, NULL, 0);
>> +}
>> +
>> +static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t ofs,
>> + size_t len, u8 *buf)
>> +{
>> + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
>> + SPI_MEM_OP_ADDR(nor->addr_width, ofs,
>> + 1),
>> + SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
>> + SPI_MEM_OP_DATA_IN(len, buf, 1));
>> + bool usebouncebuf = false;
>> + size_t remaining = len;
>> + int ret;
>> +
>> + if (object_is_on_stack(buf) || !virt_addr_valid(buf)) {
>> + usebouncebuf = true;
>> + op.data.buf.in = nor->bouncebuf;
>> + }
>> +
>> + /* get transfer protocols. */
>> + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
>> + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
>> + op.dummy.buswidth = op.addr.buswidth;
>> + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
>> +
>> + /* convert the dummy cycles to the number of bytes */
>> + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
>> +
>> + while (remaining) {
>
> Can't we get rid of this while? See Andrey's patch at
> https://lkml.org/lkml/2019/4/1/32. Andrey's patches are not included in this
> patch. We should consider integrating his work first, or squash his work in this
> patch, or ask him to rework the series after this patch gets accepted. I'll let
> you decide.
>
I think its better to squash that series into this patch. Will take care
of that
>> + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
>> + if (!usebouncebuf)
>> + op.data.buf.out = buf;
>> + else if (op.data.nbytes > nor->bouncebuf_size)
>> + op.data.nbytes = nor->bouncebuf_size;
>> +
>> + ret = spi_mem_adjust_op_size(nor->spimem, &op);
>> + if (ret)
>> + return ret;
>> +
>> + ret = spi_mem_exec_op(nor->spimem, &op);
>> + if (ret)
>> + return ret;
>> +
>> + if (usebouncebuf)
>> + memcpy(buf, nor->bouncebuf, op.data.nbytes);
>> +
>> + op.addr.val += op.data.nbytes;
>> + remaining -= op.data.nbytes;
>> + buf += op.data.nbytes;
>> + }
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t ofs, size_t len,
>> + u8 *buf)
>> +{
>> + if (nor->spimem)
>> + return spi_nor_spimem_read_data(nor, ofs, len, buf);
>> +
>> + return nor->read(nor, ofs, len, buf);
>> +}
>> +
>> +static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t ofs,
>> + size_t len, const u8 *buf)
>> +{
>> + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode,
>
> how about moving SPI_MEM_OP() to the next line to avoid breaking lines below?
> General comment.
>
Agreed, will fix.
>> + 1),
>> + SPI_MEM_OP_ADDR(nor->addr_width, ofs,
>> + 1),
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_OUT(len, NULL, 1));
>> + bool usebouncebuf = false;
>> + int ret;
>> +
>> + if (object_is_on_stack(buf) || !virt_addr_valid(buf)) {
>> + usebouncebuf = true;
>> + op.data.buf.out = nor->bouncebuf;
>> + }
>> +
>> + /* get transfer protocols. */
>> + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
>> + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
>> + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
>> +
>> + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
>> + op.addr.nbytes = 0;
>> +
>> + op.data.nbytes = len < UINT_MAX ? len : UINT_MAX;
>> +
>> + if (!usebouncebuf) {
>> + op.data.buf.out = buf;
>> + } else {
>> + if (op.data.nbytes > nor->bouncebuf_size)
>> + op.data.nbytes = nor->bouncebuf_size;
>> +
>> + memcpy(nor->bouncebuf, buf, op.data.nbytes);
>> + }
>> +
>> + ret = spi_mem_adjust_op_size(nor->spimem, &op);
>> + if (ret)
>> + return ret;
>> +
>> + ret = spi_mem_exec_op(nor->spimem, &op);
>> + if (ret)
>> + return ret;
>> +
>> + return op.data.nbytes;
>> +}
>> +
[...]
>> /* Enable/disable 4-byte addressing mode. */
>> static int set_4byte(struct spi_nor *nor, bool enable)
>> {
>> int status;
>> bool need_wren = false;
>> - u8 cmd;
>>
>> switch (JEDEC_MFR(nor->info)) {
>> case SNOR_MFR_ST:
>> @@ -486,8 +752,7 @@ static int set_4byte(struct spi_nor *nor, bool enable)
>> if (need_wren)
>> write_enable(nor);
>>
>> - cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
>> - status = nor->write_reg(nor, cmd, NULL, 0);
>> + status = macronix_set_4byte(nor, enable);
>> if (need_wren)
>> write_disable(nor);
>>
>> @@ -500,8 +765,7 @@ static int set_4byte(struct spi_nor *nor, bool enable)
>> * We must clear the register to enable normal behavior.
>> */
>> write_enable(nor);
>> - nor->cmd_buf[0] = 0;
>> - nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1);
>> + write_ear(nor, 0);
>> write_disable(nor);
>> }
>>
>> @@ -509,16 +773,42 @@ static int set_4byte(struct spi_nor *nor, bool enable)
>> default:
>> /* Spansion style */
>
> how about introducing a spansion_set_4byte() and return it directly?
Will do.
>
>> nor->cmd_buf[0] = enable << 7;
>> +
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_OUT(1, NULL, 1));
>> +
>> + return spi_nor_data_op(nor, &op, nor->cmd_buf, 1);
>> + }
>> +
>> return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
>> }
>> }
>>
>> +static int xread_sr(struct spi_nor *nor, u8 *sr)
>
> spi_nor_xread_sr?
>
Ok
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_IN(0, NULL, 1));
>> +
>> + return spi_nor_data_op(nor, &op, sr, 1);
>> + }
>> +
>> + return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1);
>> +}
>> +
>> static int s3an_sr_ready(struct spi_nor *nor)
>> {
>> int ret;
>> u8 val;
>>
>> - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
>> + ret = xread_sr(nor, &val);
>> if (ret < 0) {
>> dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
>> return ret;
>> @@ -527,6 +817,21 @@ static int s3an_sr_ready(struct spi_nor *nor)
>> return !!(val & XSR_RDY);
>> }
>>
>> +static int clear_sr(struct spi_nor *nor)
>
> spi_nor_clear_sr?
>
Ok
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_NO_DATA);
>> +
>> + return spi_nor_nodata_op(nor, &op);
>> + }
>> +
>> + return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0);
>> +}
>> +
>> static int spi_nor_sr_ready(struct spi_nor *nor)
>> {
>> int sr = read_sr(nor);
>> @@ -539,13 +844,28 @@ static int spi_nor_sr_ready(struct spi_nor *nor)
>> else
>> dev_err(nor->dev, "Programming Error occurred\n");
>>
>> - nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0);
>> + clear_sr(nor);
>> return -EIO;
>> }
>>
>> return !(sr & SR_WIP);
>> }
>>
>> +static int clear_fsr(struct spi_nor *nor)
>
> spi_nor_clear_fsr?
>
Ok
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_NO_DATA);
>> +
>> + return spi_nor_nodata_op(nor, &op);
>> + }
>> +
>> + return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0);
>> +}
>> +
>> static int spi_nor_fsr_ready(struct spi_nor *nor)
>> {
>> int fsr = read_fsr(nor);
>> @@ -562,7 +882,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
>> dev_err(nor->dev,
>> "Attempted to modify a protected sector.\n");
>>
>> - nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0);
>> + clear_fsr(nor);
>> return -EIO;
>> }
>>
>> @@ -630,6 +950,16 @@ static int erase_chip(struct spi_nor *nor)
>> {
>> dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
>>
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_NO_DATA);
>> +
>> + return spi_nor_nodata_op(nor, &op);
>> + }
>> +
>> return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0);
>> }
>>
>> @@ -692,6 +1022,17 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
>> if (nor->erase)
>> return nor->erase(nor, addr);
>>
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(nor->erase_opcode, 1),
>> + SPI_MEM_OP_ADDR(nor->addr_width, addr,
>> + 1),
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_NO_DATA);
>> +
>> + return spi_nor_nodata_op(nor, &op);
>> + }
>> +
>> /*
>> * Default implementation, if driver doesn't have a specialized HW
>> * control
>> @@ -1406,7 +1747,18 @@ static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr)
>>
>> write_enable(nor);
>>
>> - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2);
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_OUT(0, NULL, 1));
>> +
>> + ret = spi_nor_data_op(nor, &op, sr_cr, 2);
>> + } else {
>> + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2);
>> + }
>> +
>> if (ret < 0) {
>> dev_err(nor->dev,
>> "error while writing configuration register\n");
>> @@ -1585,6 +1937,36 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
>> return 0;
>> }
>>
>> +static int write_sr2(struct spi_nor *nor, u8 sr2)
>
> spi_nor_write_sr2?
>
Ok
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_OUT(0, NULL, 1));
>> +
>> + return spi_nor_data_op(nor, &op, &sr2, 1);
>> + }
>> +
>> + return nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1);
>> +}
>> +
>> +static int read_sr2(struct spi_nor *nor, u8 *sr2)
>
> spi_nor_read_sr2?
>
Ok
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_IN(0, NULL, 1));
>> +
>> + return spi_nor_data_op(nor, &op, sr2, 1);
>> + }
>> +
>> + return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1);
>> +}
>> +
>> /**
>> * sr2_bit7_quad_enable() - set QE bit in Status Register 2.
>> * @nor: pointer to a 'struct spi_nor'
>> @@ -1603,7 +1985,7 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>> int ret;
>>
>> /* Check current Quad Enable bit value. */
>> - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
>> + ret = read_sr2(nor, &sr2);
>> if (ret)
>> return ret;
>> if (sr2 & SR2_QUAD_EN_BIT7)
>> @@ -1614,7 +1996,7 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>>
>> write_enable(nor);
>>
>> - ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1);
>> + ret = write_sr2(nor, sr2);
>> if (ret < 0) {
>> dev_err(nor->dev, "error while writing status register 2\n");
>> return -EINVAL;
>> @@ -1626,8 +2008,7 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
>> return ret;
>> }
>>
>> - /* Read back and check it. */
>> - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
>> + ret = read_sr2(nor, &sr2);
>> if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) {
>> dev_err(nor->dev, "SR2 Quad bit not set\n");
>> return -EINVAL;
>> @@ -2054,13 +2435,28 @@ static const struct flash_info spi_nor_ids[] = {
>> { },
>> };
>>
>> +static int read_id(struct spi_nor *nor, u8 *id)
>
> this function is called just from spi_nor_read_id(). How about incorporating
> this code into spi_nor_read_id() so that we use functions that are prepended
> with "spi_nor" to not pollute the namespace?
I agree, but inlining this code would break 80 char limit due to extra
indentation required for nor->read_reg() call below.
So how about renaming this function to spi_nor_read_id() and current
spi_nor_read_id() function to spi_nor_get_flash_info()?
>> +{
>> + if (nor->spimem) {
>> + struct spi_mem_op op = SPI_MEM_OP(
>> + SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
>> + SPI_MEM_OP_NO_ADDR,
>> + SPI_MEM_OP_NO_DUMMY,
>> + SPI_MEM_OP_DATA_IN(0, NULL, 1));
>> +
>> + return spi_nor_data_op(nor, &op, id, SPI_NOR_MAX_ID_LEN);
>> + }
>> +
>> + return nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
>> +}
>> +
>> static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
>> {
>> int tmp;
>> u8 id[SPI_NOR_MAX_ID_LEN];
>> const struct flash_info *info;
>>
>> - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
>> + tmp = read_id(nor, id);
>> if (tmp < 0) {
>> dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
>> return ERR_PTR(tmp);
>> @@ -2096,7 +2492,7 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
>> if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
>> addr = spi_nor_s3an_addr_convert(nor, addr);
>>
>> - ret = nor->read(nor, addr, len, buf);
>> + ret = spi_nor_read_data(nor, addr, len, buf);
>> if (ret == 0) {
>> /* We shouldn't see 0-length reads */
>> ret = -EIO;
>> @@ -2141,7 +2537,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
>> nor->program_opcode = SPINOR_OP_BP;
>>
>> /* write one byte. */
>> - ret = nor->write(nor, to, 1, buf);
>> + ret = spi_nor_write_data(nor, to, 1, buf);
>> if (ret < 0)
>> goto sst_write_err;
>> WARN(ret != 1, "While writing 1 byte written %i bytes\n",
>> @@ -2157,7 +2553,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
>> nor->program_opcode = SPINOR_OP_AAI_WP;
>>
>> /* write two bytes. */
>> - ret = nor->write(nor, to, 2, buf + actual);
>> + ret = spi_nor_write_data(nor, to, 2, buf + actual);
>> if (ret < 0)
>> goto sst_write_err;
>> WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
>> @@ -2180,7 +2576,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
>> write_enable(nor);
>>
>> nor->program_opcode = SPINOR_OP_BP;
>> - ret = nor->write(nor, to, 1, buf + actual);
>> + ret = spi_nor_write_data(nor, to, 1, buf + actual);
>> if (ret < 0)
>> goto sst_write_err;
>> WARN(ret != 1, "While writing 1 byte written %i bytes\n",
>> @@ -2242,7 +2638,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
>> addr = spi_nor_s3an_addr_convert(nor, addr);
>>
>> write_enable(nor);
>> - ret = nor->write(nor, addr, page_remain, buf + i);
>> + ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
>> if (ret < 0)
>> goto write_err;
>> written = ret;
>> @@ -2261,8 +2657,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
>>
>> static int spi_nor_check(struct spi_nor *nor)
>> {
>> - if (!nor->dev || !nor->read || !nor->write ||
>> - !nor->read_reg || !nor->write_reg) {
>> + if (!nor->dev ||
>> + (!nor->spimem &&
>> + (!nor->read || !nor->write || !nor->read_reg ||
>> + !nor->write_reg))) {
>> pr_err("spi-nor: please fill all the necessary fields!\n");
>> return -EINVAL;
>> }
>> @@ -2275,7 +2673,7 @@ static int s3an_nor_scan(struct spi_nor *nor)
>> int ret;
>> u8 val;
>>
>> - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
>> + ret = xread_sr(nor, &val);
>> if (ret < 0) {
>> dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
>> return ret;
>> @@ -2405,7 +2803,7 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
>> int ret;
>>
>> while (len) {
>> - ret = nor->read(nor, addr, len, buf);
>> + ret = spi_nor_read_data(nor, addr, len, buf);
>> if (!ret || ret > len)
>> return -EIO;
>> if (ret < 0)
>> @@ -4188,6 +4586,215 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>> }
>> EXPORT_SYMBOL_GPL(spi_nor_scan);
>>
>> +static int spi_nor_probe(struct spi_mem *spimem)
>> +{
>> + struct spi_device *spi = spimem->spi;
>> + struct flash_platform_data *data;
>> + struct spi_nor *nor;
>> + struct spi_nor_hwcaps hwcaps = {
>> + .mask = SNOR_HWCAPS_READ |
>> + SNOR_HWCAPS_READ_FAST |
>> + SNOR_HWCAPS_PP,
>> + };
>> + char *flash_name;
>> + int ret;
>> +
>> + data = dev_get_platdata(&spi->dev);
>
> you can do the initialization at declaration
>
will update..
>> +
>> + nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
>> + if (!nor)
>> + return -ENOMEM;
>> +
>> + /*
>> + * We need the bounce buffer early to read/write registers when going
>> + * through the spi-mem layer (buffers have to be DMA-able).
>> + * We'll reallocate a new buffer if nor->page_size turns out to be
>> + * greater than PAGE_SIZE (which shouldn't happen before long since NOR
>> + * pages are usually less than 1KB) after spi_nor_scan() returns.
>> + */
>> + nor->bouncebuf_size = PAGE_SIZE;
>> + nor->bouncebuf = devm_kmalloc(&spi->dev, nor->bouncebuf_size,
>> + GFP_KERNEL);
>> + if (!nor->bouncebuf)
>> + return -ENOMEM;
>> +
>> + nor->spimem = spimem;
>> + nor->dev = &spi->dev;
>> + spi_nor_set_flash_node(nor, spi->dev.of_node);
>> +
>> + spi_mem_set_drvdata(spimem, nor);
>> +
>> + if (spi->mode & SPI_RX_OCTAL) {
>> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
>> +
>> + if (spi->mode & SPI_TX_OCTAL)
>> + hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
>> + SNOR_HWCAPS_PP_1_1_8 |
>> + SNOR_HWCAPS_PP_1_8_8);
>> + } else if (spi->mode & SPI_RX_QUAD) {
>> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
>> +
>> + if (spi->mode & SPI_TX_QUAD)
>> + hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 |
>> + SNOR_HWCAPS_PP_1_1_4 |
>> + SNOR_HWCAPS_PP_1_4_4);
>> + } else if (spi->mode & SPI_RX_DUAL) {
>> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
>> +
>> + if (spi->mode & SPI_TX_DUAL)
>> + hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2;
>> + }
>> +
>> + if (data && data->name)
>> + nor->mtd.name = data->name;
>> +
>> + if (!nor->mtd.name)
>> + nor->mtd.name = spi_mem_get_name(spimem);
>> +
>> + /*
>> + * For some (historical?) reason many platforms provide two different
>> + * names in flash_platform_data: "name" and "type". Quite often name is
>> + * set to "m25p80" and then "type" provides a real chip name.
>> + * If that's the case, respect "type" and ignore a "name".
>> + */
>> + if (data && data->type)
>> + flash_name = data->type;
>> + else if (!strcmp(spi->modalias, "spi-nor"))
>> + flash_name = NULL; /* auto-detect */
>> + else
>> + flash_name = spi->modalias;
>> +
>> + ret = spi_nor_scan(nor, flash_name, &hwcaps);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * None of the existing parts have > 512B pages, but let's play safe
>> + * and add this logic so that if anyone ever adds support for such
>> + * a NOR we don't end up with buffer overflows.
>> + */
>> + if (nor->page_size > PAGE_SIZE) {
>> + nor->bouncebuf_size = nor->page_size;
>> + devm_kfree(nor->dev, nor->bouncebuf);
>> + nor->bouncebuf = devm_kmalloc(nor->dev,
>> + nor->bouncebuf_size,
>> + GFP_KERNEL);
>> + if (!nor->bouncebuf)
>> + return -ENOMEM;
>> + }
>> +
>> + return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
>> + data ? data->nr_parts : 0);
>> +}
>> +
>> +static int spi_nor_remove(struct spi_mem *spimem)
>> +{
>> + struct spi_nor *nor = spi_mem_get_drvdata(spimem);
>> + int ret;
>> +
>> + spi_nor_restore(nor);
>> +
>> + /* Clean up MTD stuff. */
>> + ret = mtd_device_unregister(&nor->mtd);
>> + if (ret)
>> + return ret;> +
>> + return 0;
>
> return mtd_device_unregister(&nor->mtd); directly
Ok
>
>> +}
>> +
>> +static void spi_nor_shutdown(struct spi_mem *spimem)
>> +{
>> + struct spi_nor *nor = spi_mem_get_drvdata(spimem);
>> +
>> + spi_nor_restore(nor);
>> +}
>> +
>> +/*
>> + * Do NOT add to this array without reading the following:
>> + *
>> + * Historically, many flash devices are bound to this driver by their name. But
>> + * since most of these flash are compatible to some extent, and their
>> + * differences can often be differentiated by the JEDEC read-ID command, we
>> + * encourage new users to add support to the spi-nor library, and simply bind
>> + * against a generic string here (e.g., "jedec,spi-nor").
>> + *
>> + * Many flash names are kept here in this list (as well as in spi-nor.c) to
>> + * keep them available as module aliases for existing platforms.
>> + */
>> +static const struct spi_device_id spi_nor_dev_ids[] = {
>> + /*
>> + * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
>> + * hack around the fact that the SPI core does not provide uevent
>> + * matching for .of_match_table
>> + */
>> + {"spi-nor"},
>> +
>> + /*
>> + * Entries not used in DTs that should be safe to drop after replacing
>> + * them with "spi-nor" in platform data.
>> + */
>> + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
>> +
>> + /*
>> + * Entries that were used in DTs without "jedec,spi-nor" fallback and
>> + * should be kept for backward compatibility.
>> + */
>> + {"at25df321a"}, {"at25df641"}, {"at26df081a"},
>> + {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
>> + {"mx25l25635e"},{"mx66l51235l"},
>> + {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
>> + {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
>> + {"s25fl064k"},
>> + {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
>> + {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
>> + {"m25p64"}, {"m25p128"},
>> + {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
>> + {"w25q80bl"}, {"w25q128"}, {"w25q256"},
>> +
>> + /* Flashes that can't be detected using JEDEC */
>> + {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
>> + {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
>> + {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
>> +
>> + /* Everspin MRAMs (non-JEDEC) */
>> + { "mr25h128" }, /* 128 Kib, 40 MHz */
>> + { "mr25h256" }, /* 256 Kib, 40 MHz */
>> + { "mr25h10" }, /* 1 Mib, 40 MHz */
>> + { "mr25h40" }, /* 4 Mib, 40 MHz */
>> +
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
>> +
>> +static const struct of_device_id spi_nor_of_table[] = {
>> + /*
>> + * Generic compatibility for SPI NOR that can be identified by the
>> + * JEDEC READ ID opcode (0x9F). Use this, if possible.
>> + */
>> + { .compatible = "jedec,spi-nor" },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, spi_nor_of_table);
>> +
>> +/*
>> + * REVISIT: many of these chips have deep power-down modes, which
>> + * should clearly be entered on suspend() to minimize power use.
>> + * And also when they're otherwise idle...
>> + */
>> +static struct spi_mem_driver spi_nor_driver = {
>> + .spidrv = {
>> + .driver = {
>> + .name = "spi-nor",
>> + .of_match_table = spi_nor_of_table,
>> + },
>> + .id_table = spi_nor_dev_ids,
>> + },
>> + .probe = spi_nor_probe,
>> + .remove = spi_nor_remove,
>> + .shutdown = spi_nor_shutdown,
>> +};
>> +module_spi_mem_driver(spi_nor_driver);
>> +
>> MODULE_LICENSE("GPL v2");
>> MODULE_AUTHOR("Huang Shijie <shijie8@xxxxxxxxx>");
>> MODULE_AUTHOR("Mike Lavender");
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index b3d360b0ee3d..ac16745f5ef8 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -9,6 +9,7 @@
>> #include <linux/bitops.h>
>> #include <linux/mtd/cfi.h>
>> #include <linux/mtd/mtd.h>
>> +#include <linux/spi/spi-mem.h>
>>
>> /*
>> * Manufacturer IDs
>> @@ -344,6 +345,10 @@ struct flash_info;
>> * @mtd: point to a mtd_info structure
>> * @lock: the lock for the read/write/erase/lock/unlock operations
>> * @dev: point to a spi device, or a spi nor controller device.
>> + * @spimem: point to the spi mem device
>> + * @bouncebuf: bounce buffer used when the buffer passed by the MTD
>> + * layer is not DMA-able
>> + * @bouncebuf_size: size of the bounce buffe
> ^buffer
>
>> * @info: spi-nor part JDEC MFR id and other info
>> * @page_size: the page size of the SPI NOR
>> * @addr_width: number of address bytes
>> @@ -380,6 +385,9 @@ struct spi_nor {
>> struct mtd_info mtd;
>> struct mutex lock;
>> struct device *dev;
>> + struct spi_mem *spimem;
>> + void *bouncebuf;
>> + unsigned int bouncebuf_size;
>
> size_t?
>
> Please run checkpatch --strict over the patch, there are few things to fix.
>
I will address all except for the ones reported for spi_nor_dev_ids[] as
they existed before so that alignment looks good.
> Do you think it is worth documenting the new functions?
>
Will add at places where functions are not trivial.
Thanks for the review!
--
Regards
Vignesh