Re: [PATCH v10 1/2] dt-bindings: misc: aspeed-p2a-ctrl: add support

[Patrick Venture]

On Mon, Apr 8, 2019 at 5:48 PM Andrew Jeffery <andrew@xxxxxxxx> wrote:
>
>
>
> On Tue, 9 Apr 2019, at 00:12, Patrick Venture wrote:
> > Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
> >
> > Signed-off-by: Patrick Venture <venture@xxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> Reviewed-by: Andrew Jeffery <andrew@xxxxxxxx>
>
> > ---
> > Changes for v10:
> >  - Chopped out nearly identical information.
> > Changes for v9:
> >  - Added missing details about syscon parent
> > Changes for v8:
> > - None
> > Changes for v7:
> > - Moved node under the syscon node it requires
> > Changes for v6:
> > - None
> > Changes for v5:
> > - None
> > Changes for v4:
> > - None
> > Changes for v3:
> > - None
> > Changes for v2:
> > - Added comment about syscon required parameter.
> > ---
> >  .../bindings/misc/aspeed-p2a-ctrl.txt         | 47 +++++++++++++++++++
> >  1 file changed, 47 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> >
> > diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > new file mode 100644
> > index 0000000000000..854bd67ffec68
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > @@ -0,0 +1,47 @@
> > +======================================================================
> > +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge
> > Control Driver
> > +======================================================================
> > +
> > +The bridge is available on platforms with the VGA enabled on the
> > Aspeed device.
> > +In this case, the host has access to a 64KiB window into all of the
> > BMC's
> > +memory.  The BMC can disable this bridge.  If the bridge is enabled,
> > the host
> > +has read access to all the regions of memory, however the host only
> > has read
> > +and write access depending on a register controlled by the BMC.
> > +
> > +Required properties:
> > +===================
> > +
> > + - compatible: must be one of:
> > +     - "aspeed,ast2400-p2a-ctrl"
> > +     - "aspeed,ast2500-p2a-ctrl"
> > +
> > +Optional properties:
> > +===================
> > +
> > +- memory-region: A phandle to a reserved_memory region to be used for
> > the PCI
> > +             to AHB mapping
> > +
> > +The p2a-control node should be the child of a syscon node with the
> > required
> > +property:
> > +
> > +- compatible : Should be one of the following:
> > +             "aspeed,ast2400-scu", "syscon", "simple-mfd"
> > +             "aspeed,g4-scu", "syscon", "simple-mfd"
> > +             "aspeed,ast2500-scu", "syscon", "simple-mfd"
> > +             "aspeed,g5-scu", "syscon", "simple-mfd"
> > +
> > +Example
> > +===================
> > +
> > +g4 Example
> > +----------
> > +
> > +syscon: scu@1e6e2000 {
> > +     compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
> > +     reg = <0x1e6e2000 0x1a8>;
> > +
> > +     p2a: p2a-control {
> > +             compatible = "aspeed,ast2400-p2a-ctrl";
> > +             memory-region = <&reserved_memory>;
> > +     };
> > +};
> > --
> > 2.21.0.392.gf8f6787159e-goog
> >
> >

I'm sorry, is there something more I need to do with the patch series?
 Sometimes I miss emails.

Thanks,
Patrick