Re: INFO: task hung in usb_kill_urb

From: syzbot
Date: Tue Apr 16 2019 - 17:53:04 EST

Next message: Miquel Raynal: "Re: [PATCH 1/2] mtd: nand: Kconfig: correct the MTD_NAND_ECC_SW_BCH select"
Previous message: Song Liu: "Re: [PATCH bpf-next v1 2/2] selftests: bpf: read netns from struct bpf_sock_ops"
In reply to: Alan Stern: "Re: INFO: task hung in usb_kill_urb"
Next in thread: Alan Stern: "Re: INFO: task hung in usb_kill_urb"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello,

syzbot has tested the proposed patch but the reproducer still triggered crash:
INFO: task hung in usb_kill_urb

usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
INFO: task kworker/1:1:21 blocked for more than 143 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:1 D26512 21 2 0x80000000
Workqueue: usb_hub_wq hub_event
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INFO: task kworker/1:2:533 blocked for more than 143 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:2 D25760 533 2 0x80000000
Workqueue: usb_hub_wq hub_event
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INFO: task kworker/1:3:5711 blocked for more than 143 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:3 D26656 5711 2 0x80000000
Workqueue: usb_hub_wq hub_event
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INFO: task kworker/1:4:5815 blocked for more than 143 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:4 D27416 5815 2 0x80000000
Workqueue: usb_hub_wq hub_event
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INFO: task kworker/1:5:5854 blocked for more than 144 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:5 D27008 5854 2 0x80000000
Workqueue: usb_hub_wq hub_event
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
INFO: task kworker/1:6:5953 blocked for more than 144 seconds.
Not tainted 5.1.0-rc4-g9a33b36-dirty #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/1:6 D28144 5953 2 0x80000000
Workqueue: usb_hub_wq hub_event
Call Trace:
schedule+0x8f/0x180 kernel/sched/core.c:3562
usb_kill_urb drivers/usb/core/urb.c:695 [inline]
usb_kill_urb+0x22a/0x2c0 drivers/usb/core/urb.c:687
usb_start_wait_urb+0x257/0x4d0 drivers/usb/core/message.c:63
usb_internal_control_msg drivers/usb/core/message.c:101 [inline]
usb_control_msg+0x321/0x4a0 drivers/usb/core/message.c:152
hub_port_init+0x81d/0x2d30 drivers/usb/core/hub.c:4655
hub_port_connect drivers/usb/core/hub.c:5021 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x11b8/0x3b00 drivers/usb/core/hub.c:5432
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Showing all locks held in the system:
5 locks held by kworker/1:1/21:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
#1: 0000000066a57f62 ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 000000008061858c (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 000000008061858c (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
#3: 00000000e9c2b745 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 00000000e9c2b745 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 00000000e9c2b745 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 00000000e9c2b745 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 00000000e9c2b745 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 0000000074a9c1da (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529
1 lock held by khungtaskd/23:
#0: 000000009a7c2fe9 (rcu_read_lock){....}, at: debug_show_all_locks+0x53/0x269 kernel/locking/lockdep.c:5059
5 locks held by kworker/1:2/533:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
#1: 0000000086e8eaf1 ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 000000006469b3a5 (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 000000006469b3a5 (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
#3: 000000007f0b56f7 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 000000007f0b56f7 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 000000007f0b56f7 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 000000007f0b56f7 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 000000007f0b56f7 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 00000000f92a9577 (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529
1 lock held by rsyslogd/5452:
#0: 0000000078f4a532 (&f->f_pos_lock){+.+.}, at: __fdget_pos+0xe8/0x100 fs/file.c:801
2 locks held by getty/5542:
#0: 0000000023afba58 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 00000000bc10d82a (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
2 locks held by getty/5543:
#0: 00000000a6ab1d25 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 00000000d5a44554 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
2 locks held by getty/5544:
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
#0: 0000000098fc4771 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 0000000017060772 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
2 locks held by getty/5545:
#0: 000000005fca8b56 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 000000005a5319f8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
2 locks held by getty/5546:
#0: 00000000e590919f (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 000000004775329f (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
2 locks held by getty/5547:
#0: 00000000179d4d0b (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 000000002922a30b (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
2 locks held by getty/5548:
#0: 000000006c2e3908 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x27/0x80 drivers/tty/tty_ldisc.c:272
#1: 000000009cdeb0bf (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x21c/0x1a60 drivers/tty/n_tty.c:2156
5 locks held by kworker/1:3/5711:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
#1: 000000008f65d948 ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 00000000d16a6c1c (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 00000000d16a6c1c (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
#3: 00000000df89ca19 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 00000000df89ca19 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 00000000df89ca19 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 00000000df89ca19 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 00000000df89ca19 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 000000007284a231 (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529
5 locks held by kworker/1:4/5815:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
#1: 00000000b6e140d2 ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 0000000054730851 (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 0000000054730851 (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
#3: 00000000e19c14b6 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 00000000e19c14b6 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 00000000e19c14b6 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 00000000e19c14b6 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 00000000e19c14b6 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 000000001c7bddbf (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529
5 locks held by kworker/1:5/5854:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
dummy_hcd dummy_hcd.0: Unsupported driver max speed 0
#1: 00000000357ce4fb ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 000000009d868e2d (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 000000009d868e2d (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
usb-fuzzer-gadget dummy_udc.0: failed to start USB fuzzer: -22
#3: 00000000938a6414 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 00000000938a6414 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 00000000938a6414 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 00000000938a6414 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 00000000938a6414 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 0000000050760949 (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529
5 locks held by kworker/1:6/5953:
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: __write_once_size include/linux/compiler.h:220 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_data kernel/workqueue.c:619 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline]
#0: 00000000b3ad1415 ((wq_completion)usb_hub_wq){+.+.}, at: process_one_work+0x81f/0x1580 kernel/workqueue.c:2240
#1: 00000000d3b00b82 ((work_completion)(&hub->events)){+.+.}, at: process_one_work+0x853/0x1580 kernel/workqueue.c:2244
#2: 000000008af22eae (&dev->mutex){....}, at: device_lock include/linux/device.h:1207 [inline]
#2: 000000008af22eae (&dev->mutex){....}, at: hub_event+0x18a/0x3b00 drivers/usb/core/hub.c:5378
#3: 000000007f7b7ee0 (&port_dev->status_lock){+.+.}, at: usb_lock_port drivers/usb/core/hub.c:2994 [inline]
#3: 000000007f7b7ee0 (&port_dev->status_lock){+.+.}, at: hub_port_connect drivers/usb/core/hub.c:5020 [inline]
#3: 000000007f7b7ee0 (&port_dev->status_lock){+.+.}, at: hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
#3: 000000007f7b7ee0 (&port_dev->status_lock){+.+.}, at: port_event drivers/usb/core/hub.c:5350 [inline]
#3: 000000007f7b7ee0 (&port_dev->status_lock){+.+.}, at: hub_event+0x11a3/0x3b00 drivers/usb/core/hub.c:5432
#4: 0000000090909ece (hcd->address0_mutex){+.+.}, at: hub_port_init+0x1bb/0x2d30 drivers/usb/core/hub.c:4529

=============================================

NMI backtrace for cpu 0
CPU: 0 PID: 23 Comm: khungtaskd Not tainted 5.1.0-rc4-g9a33b36-dirty #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe8/0x16e lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x48/0x87 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x1a6/0x1bd lib/nmi_backtrace.c:62
trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
check_hung_uninterruptible_tasks kernel/hung_task.c:204 [inline]
watchdog+0x98e/0xe20 kernel/hung_task.c:288
kthread+0x313/0x420 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1 skipped: idling at native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:57

Tested on:

commit: 9a33b369 usb-fuzzer: main usb gadget fuzzer driver
git tree: https://github.com/google/kasan/tree/usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=10b5e057200000
kernel config: https://syzkaller.appspot.com/x/.config?x=23e37f59d94ddd15
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
patch: https://syzkaller.appspot.com/x/patch.diff?x=131dca6b200000

Next message: Miquel Raynal: "Re: [PATCH 1/2] mtd: nand: Kconfig: correct the MTD_NAND_ECC_SW_BCH select"
Previous message: Song Liu: "Re: [PATCH bpf-next v1 2/2] selftests: bpf: read netns from struct bpf_sock_ops"
In reply to: Alan Stern: "Re: INFO: task hung in usb_kill_urb"
Next in thread: Alan Stern: "Re: INFO: task hung in usb_kill_urb"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]