Re: [PATCH] phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

From: Kishon Vijay Abraham I
Date: Wed Apr 17 2019 - 01:34:35 EST




On 15/04/19 4:47 PM, Paul Kocialkowski wrote:
> Hi,
>
> Le jeudi 14 mars 2019 Ã 14:05 +0100, Paul Kocialkowski a Ãcrit :
>> On platforms where the MUSB and HCI controllers share PHY0, PHY passby
>> is required when using the HCI controller with the PHY, but it must be
>> disabled when the MUSB controller is used instead.
>>
>> Without this, PHY0 passby is always enabled, which results in broken
>> peripheral mode on such platforms (e.g. H3/H5).
>>
>> Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")
>
> Does anyone have feedback about this? I was hoping to get it merged
> rather soon since it pretty much fixes USB gadget on H3/R40/V3/V3s.

merged now, thanks.

-Kishon
>
> Cheers,
>
> Paul
>
>> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
>> ---
>> drivers/phy/allwinner/phy-sun4i-usb.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
>> index 5163097b43df..7b23920e0068 100644
>> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
>> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
>> @@ -551,6 +551,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
>> struct sun4i_usb_phy_data *data =
>> container_of(work, struct sun4i_usb_phy_data, detect.work);
>> struct phy *phy0 = data->phys[0].phy;
>> + struct sun4i_usb_phy *phy = phy_get_drvdata(phy0);
>> bool force_session_end, id_notify = false, vbus_notify = false;
>> int id_det, vbus_det;
>>
>> @@ -607,6 +608,9 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
>> mutex_unlock(&phy0->mutex);
>> }
>>
>> + /* Enable PHY0 passby for host mode only. */
>> + sun4i_usb_phy_passby(phy, !id_det);
>> +
>> /* Re-route PHY0 if necessary */
>> if (data->cfg->phy0_dual_route)
>> sun4i_usb_phy0_reroute(data, id_det);