Re: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon

From: Chen Yu
Date: Wed Apr 17 2019 - 03:19:53 EST

Next message: Nathan Chancellor: "[PATCH] arm64: futex: Restore oldval initialization to work around buggy compilers"
Previous message: Luciano Coelho: "Re: [PATCH] iwlwifi: Use correct channel_profile iniwl_get_nvm"
In reply to: Kishon Vijay Abraham I: "Re: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Kishon,

On 2019/4/17 14:42, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 29/03/19 9:44 AM, Yu Chen wrote:
>> This driver handles usb phy power on and shutdown for hi3660 Soc of
>> Hisilicon.
>>
>> Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
>> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
>> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> Cc: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
>> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
>> Cc: Arnd Bergmann <arnd@xxxxxxxx>
>> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
>> Cc: Pengcheng Li <lpc.li@xxxxxxxxxxxxx>
>> Cc: Jianguo Sun <sunjianguo1@xxxxxxxxxx>
>> Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
>> Cc: Jiancheng Xue <xuejiancheng@xxxxxxxxxxxxx>
>> Cc: John Stultz <john.stultz@xxxxxxxxxx>
>> Cc: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>> Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
>> ---
>> v1:
>> * Remove unused code and add comment for time delay as suggested by
>> Kishon Vijay Abraham I.
>> v2:
>> * Fix license declaration.
>> * Remove redundant parens.
>> * Remove unused member variables in struct hi3660_priv.
>> v4:
>> * Add comments for HI3660_USB_DEFAULT_PHY_PARAM.
>> * Add margin for usleep_range.
>> * Get regmap of otg_bc from parent's of_node.
>> ---
>> ---
>> MAINTAINERS | 8 ++
>> drivers/phy/hisilicon/Kconfig | 10 ++
>> drivers/phy/hisilicon/Makefile | 1 +
>> drivers/phy/hisilicon/phy-hi3660-usb3.c | 233 ++++++++++++++++++++++++++++++++
>> 4 files changed, 252 insertions(+)
>> create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 3e5a5d263f29..c0057dd82dbd 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -16084,6 +16084,14 @@ L: linux-usb@xxxxxxxxxxxxxxx
>> S: Maintained
>> F: drivers/usb/roles/intel-xhci-usb-role-switch.c
>>
>> +USB IP DRIVER FOR HISILICON KIRIN
>> +M: Yu Chen <chenyu56@xxxxxxxxxx>
>> +M: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
>> +L: linux-usb@xxxxxxxxxxxxxxx
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
>
> I don't seem to have received the dt-binding patch. Can you please resend with
> updated tags?
>
> Thanks
> Kishon
>
I were not add you to the cc list of the dt-binding patch before.
This is the patch that you can find on patchwork:
https://patchwork.kernel.org/patch/10876391/

Thanks
Yu Chen

>> +F: drivers/phy/hisilicon/phy-hi3660-usb3.c
>> +
>> USB ISP116X DRIVER
>> M: Olav Kongas <ok@xxxxxxxxxxxxxx>
>> L: linux-usb@xxxxxxxxxxxxxxx
>> diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
>> index b40ee54a1a50..3c142f08987c 100644
>> --- a/drivers/phy/hisilicon/Kconfig
>> +++ b/drivers/phy/hisilicon/Kconfig
>> @@ -12,6 +12,16 @@ config PHY_HI6220_USB
>>
>> To compile this driver as a module, choose M here.
>>
>> +config PHY_HI3660_USB
>> + tristate "hi3660 USB PHY support"
>> + depends on (ARCH_HISI && ARM64) || COMPILE_TEST
>> + select GENERIC_PHY
>> + select MFD_SYSCON
>> + help
>> + Enable this to support the HISILICON HI3660 USB PHY.
>> +
>> + To compile this driver as a module, choose M here.
>> +
>> config PHY_HISTB_COMBPHY
>> tristate "HiSilicon STB SoCs COMBPHY support"
>> depends on (ARCH_HISI && ARM64) || COMPILE_TEST
>> diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
>> index f662a4fe18d8..75ba64e2faf8 100644
>> --- a/drivers/phy/hisilicon/Makefile
>> +++ b/drivers/phy/hisilicon/Makefile
>> @@ -1,4 +1,5 @@
>> obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
>> +obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
>> obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
>> obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
>> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
>> diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
>> new file mode 100644
>> index 000000000000..cc0af2c044d0
>> --- /dev/null
>> +++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
>> @@ -0,0 +1,233 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
>> + *
>> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
>> + * http://www.huawei.com
>> + *
>> + * Authors: Yu Chen <chenyu56@xxxxxxxxxx>
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#define PERI_CRG_CLK_EN4 0x40
>> +#define PERI_CRG_CLK_DIS4 0x44
>> +#define GT_CLK_USB3OTG_REF BIT(0)
>> +#define GT_ACLK_USB3OTG BIT(1)
>> +
>> +#define PERI_CRG_RSTEN4 0x90
>> +#define PERI_CRG_RSTDIS4 0x94
>> +#define IP_RST_USB3OTGPHY_POR BIT(3)
>> +#define IP_RST_USB3OTG BIT(5)
>> +
>> +#define PERI_CRG_ISODIS 0x148
>> +#define USB_REFCLK_ISO_EN BIT(25)
>> +
>> +#define PCTRL_PERI_CTRL3 0x10
>> +#define PCTRL_PERI_CTRL3_MSK_START 16
>> +#define USB_TCXO_EN BIT(1)
>> +
>> +#define PCTRL_PERI_CTRL24 0x64
>> +#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
>> +
>> +#define USBOTG3_CTRL0 0x00
>> +#define SC_USB3PHY_ABB_GT_EN BIT(15)
>> +
>> +#define USBOTG3_CTRL2 0x08
>> +#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
>> +#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
>> +
>> +#define USBOTG3_CTRL3 0x0C
>> +#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
>> +#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
>> +
>> +#define USBOTG3_CTRL4 0x10
>> +
>> +#define USBOTG3_CTRL7 0x1c
>> +#define REF_SSP_EN BIT(16)
>> +
>> +/* This value config the default txtune parameter of the usb 2.0 phy */
>> +#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
>> +
>> +struct hi3660_priv {
>> + struct device *dev;
>> + struct regmap *peri_crg;
>> + struct regmap *pctrl;
>> + struct regmap *otg_bc;
>> + u32 eye_diagram_param;
>> +};
>> +
>> +static int hi3660_phy_init(struct phy *phy)
>> +{
>> + struct hi3660_priv *priv = phy_get_drvdata(phy);
>> + u32 val, mask;
>> + int ret;
>> +
>> + /* usb refclk iso disable */
>> + ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
>> + if (ret)
>> + goto out;
>> +
>> + /* enable usb_tcxo_en */
>> + val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
>> + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* assert phy */
>> + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
>> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* enable phy ref clk */
>> + val = SC_USB3PHY_ABB_GT_EN;
>> + mask = val;
>> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
>> + if (ret)
>> + goto out;
>> +
>> + val = REF_SSP_EN;
>> + mask = val;
>> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* exit from IDDQ mode */
>> + mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
>> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
>> + if (ret)
>> + goto out;
>> +
>> + /* delay for exit from IDDQ mode */
>> + usleep_range(100, 120);
>> +
>> + /* deassert phy */
>> + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
>> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* delay for phy deasserted */
>> + usleep_range(10000, 15000);
>> +
>> + /* fake vbus valid signal */
>> + val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
>> + mask = val;
>> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* delay for vbus valid */
>> + usleep_range(100, 120);
>> +
>> + ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
>> + priv->eye_diagram_param);
>> + if (ret)
>> + goto out;
>> +
>> + return 0;
>> +out:
>> + dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
>> + return ret;
>> +}
>> +
>> +static int hi3660_phy_exit(struct phy *phy)
>> +{
>> + struct hi3660_priv *priv = phy_get_drvdata(phy);
>> + u32 val;
>> + int ret;
>> +
>> + /* assert phy */
>> + val = IP_RST_USB3OTGPHY_POR;
>> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
>> + if (ret)
>> + goto out;
>> +
>> + /* disable usb_tcxo_en */
>> + val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
>> + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
>> + if (ret)
>> + goto out;
>> +
>> + return 0;
>> +out:
>> + dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
>> + return ret;
>> +}
>> +
>> +static struct phy_ops hi3660_phy_ops = {
>> + .init = hi3660_phy_init,
>> + .exit = hi3660_phy_exit,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int hi3660_phy_probe(struct platform_device *pdev)
>> +{
>> + struct phy_provider *phy_provider;
>> + struct device *dev = &pdev->dev;
>> + struct phy *phy;
>> + struct hi3660_priv *priv;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + priv->dev = dev;
>> + priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "hisilicon,pericrg-syscon");
>> + if (IS_ERR(priv->peri_crg)) {
>> + dev_err(dev, "no hisilicon,pericrg-syscon\n");
>> + return PTR_ERR(priv->peri_crg);
>> + }
>> +
>> + priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
>> + "hisilicon,pctrl-syscon");
>> + if (IS_ERR(priv->pctrl)) {
>> + dev_err(dev, "no hisilicon,pctrl-syscon\n");
>> + return PTR_ERR(priv->pctrl);
>> + }
>> +
>> + /* node of hi3660 phy is a sub-node of usb3_otg_bc */
>> + priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
>> + if (IS_ERR(priv->otg_bc)) {
>> + dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
>> + return PTR_ERR(priv->otg_bc);
>> + }
>> +
>> + if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
>> + &(priv->eye_diagram_param)))
>> + priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
>> +
>> + phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
>> + if (IS_ERR(phy))
>> + return PTR_ERR(phy);
>> +
>> + phy_set_drvdata(phy, priv);
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static const struct of_device_id hi3660_phy_of_match[] = {
>> + {.compatible = "hisilicon,hi3660-usb-phy",},
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
>> +
>> +static struct platform_driver hi3660_phy_driver = {
>> + .probe = hi3660_phy_probe,
>> + .driver = {
>> + .name = "hi3660-usb-phy",
>> + .of_match_table = hi3660_phy_of_match,
>> + }
>> +};
>> +module_platform_driver(hi3660_phy_driver);
>> +
>> +MODULE_AUTHOR("Yu Chen <chenyu56@xxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
>>
>
> .
>

Next message: Nathan Chancellor: "[PATCH] arm64: futex: Restore oldval initialization to work around buggy compilers"
Previous message: Luciano Coelho: "Re: [PATCH] iwlwifi: Use correct channel_profile iniwl_get_nvm"
In reply to: Kishon Vijay Abraham I: "Re: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]