RE: [PATCH V12 1/5] dt-bindings: fsl: scu: add thermal binding

[Anson Huang]

Best Regards!
Anson Huang

> -----Original Message-----
> From: Aisheng Dong
> Sent: Wednesday, April 17, 2019 11:32 AM
> To: Anson Huang <anson.huang@xxxxxxx>; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; catalin.marinas@xxxxxxx;
> will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx; edubezval@xxxxxxxxx;
> daniel.lezcano@xxxxxxxxxx; ulf.hansson@xxxxxxxxxx; Daniel Baluta
> <daniel.baluta@xxxxxxx>; Peng Fan <peng.fan@xxxxxxx>;
> heiko@xxxxxxxxx; horms+renesas@xxxxxxxxxxxx; agross@xxxxxxxxxx;
> olof@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx; jagan@xxxxxxxxxxxxxxxxxxxx;
> enric.balletbo@xxxxxxxxxxxxx; marc.w.gonzalez@xxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH V12 1/5] dt-bindings: fsl: scu: add thermal binding
> 
> > From: Anson Huang
> > Sent: Tuesday, April 16, 2019 11:22 AM
> >
> > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system
> > controller, the system controller is in charge of system power, clock
> > and thermal sensors etc. management, Linux kernel has to communicate
> > with system controller via MU (message unit) IPC to get temperature
> > from thermal sensors, this patch adds binding doc for i.MX system
> controller thermal driver.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > ---
> > No changes.
> > ---
> >  .../devicetree/bindings/arm/freescale/fsl,scu.txt        | 16
> > ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index 5d7dbab..f4fb6d5 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -133,6 +133,17 @@ RTC bindings based on SCU Message Protocol
> > Required properties:
> >  - compatible: should be "fsl,imx8qxp-sc-rtc";
> >
> > +Thermal bindings based on SCU Message Protocol
> > +------------------------------------------------------------
> > +
> > +Required properties:
> > +- compatible:			Should be :
> > +				  "fsl,imx8qxp-sc-thermal"
> > +				followed by "fsl,imx-sc-thermal";
> > +
> > +- #thermal-sensor-cells:	See
> > Documentation/devicetree/bindings/thermal/thermal.txt
> > +				for a description.
> 
> Better to have an explicit value here.
> e.g.
> Must be 1. See xxx for a description.

OK, will add it in next version.

Anson.

> 
> Otherwise:
> Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> 
> Regards
> Dong Aisheng