Re: [PATCH v5 4/5] ARM: dts: da850-evm: enable cpufreq

From: Adam Ford
Date: Wed Apr 17 2019 - 13:09:31 EST


On Wed, Apr 17, 2019 at 10:27 AM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
>
> Enable cpufreq-dt support for da850-evm. The cvdd is supplied by the
> tps65070 pmic with configurable output voltage. By default da850-evm
> boards support frequencies up to 375MHz so enable this operating
> point.

Have you done any testing with the LCD on any of the devices you have?

I enabled the ondemand governor, and I got a bunch of splat from the
LCD controller:

tilcdc 1e13000.display: effective pixel clock rate (50000000Hz)
differs from the calculated rate (54000000Hz)
tilcdc 1e13000.display: tilcdc_crtc_irq(0x00000161): FIFO underflow
tilcdc 1e13000.display: tilcdc_crtc_irq(0x00000161): FIFO underflow
... [ snip]
tilcdc 1e13000.display: effective pixel clock rate (50000000Hz)
differs from the calculated rate (54000000Hz)
tilcdc 1e13000.display: effective pixel clock rate (50000000Hz)
differs from the calculated rate (54000000Hz)
tilcdc 1e13000.display: tilcdc_crtc_irq(0x00000161): FIFO underflow

It appears to go on forever. I don't necessarily want to hold it up,
but I don't know the clocking system well enough to know where to go
investigate it. I can certainly live without ondemand. Using
userspace as the default governor is fine for me for now.

adam
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> Reviewed-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> arch/arm/boot/dts/da850-evm.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index f04bc3e15332..f94bb38fdad9 100644
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -191,6 +191,19 @@
> };
> };
>
> +&cpu {
> + cpu-supply = <&vdcdc3_reg>;
> +};
> +
> +/*
> + * The standard da850-evm kits and SOM's are 375MHz so enable this operating
> + * point by default. Higher frequencies must be enabled for custom boards with
> + * other variants of the SoC.
> + */
> +&opp_375 {
> + status = "okay";
> +};
> +
> &sata {
> status = "okay";
> };
> --
> 2.21.0
>