Re: [PATCH v3 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node

From: Jagan Teki
Date: Thu Apr 18 2019 - 10:09:41 EST


On Thu, Apr 18, 2019 at 7:34 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Thu, Apr 18, 2019 at 07:18:37PM +0530, Jagan Teki wrote:
> > Add Goodix GT5663 capacitive touch controller node on
> > Amarula A64-Relic board.
> >
> > The CTP connected to board with,
> > - SDA, SCK from i2c1
> > - GPIO-LD0 as AVDD28 supply
> > - PH4 gpio as interrupt pin
> > - PH8 gpio as reset pin
> > - X axis is inverted
> > - Y axis is inverted
> >
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > Changes for v3:
> > - Use 2.8v for reg_ldo_io0
> > Changes for v2:
> > - drop i2c1, bias-pull-up
> >
> > .../allwinner/sun50i-a64-amarula-relic.dts | 25 +++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> > index 3575db216016..bd31a4385bc1 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> > @@ -49,6 +49,24 @@
> > bias-pull-up;
> > };
> >
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_pins>;
>
> You haven't fixed this, and you didn't either in the second patch.

Sorry, I interpreted previous comment to keep this pinctrl.

Since i2c1 node in sun50i-a64.dtsi doesn't have pinctrl attached to
it, added here like i2c0 is it something wrong?