[PATCH v4 0/7] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra

[Pablo Greco]

BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
software compatible.

Changes include:
- 2GiB -> 1GiB
- no eMMC
- no onboard microphone
- no IR
- no blue LED
- no charging (and power jack to USB)
- dropped USB2 and connect USB1 to a 4-port HUB.

Changes in v4:
- Went back to v2
- Added GPIO pin-bank regulators (both m2-ultra and m2-berry)

Changes in v3:
- Removed "Sort device node dereferences" (already applied)
- Added basic pio node
- Tied GMAC regulators to the pio (both m2-ultra and m2-berry)

Changes in v2:
- Split into smaller patches

Pablo Greco (7):
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet
    controller
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
  ARM: dts: sun8i: v40: bananapi-m2-berry: Fix WiFi regulator
    definitions
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator  
      supplies
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator  
      supplies

 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts |   6 ++
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 124 ++++++++++++++++++++++
 2 files changed, 130 insertions(+)

-- 
1.8.3.1