Re: [PATCH v4 5/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
From: Pablo SebastiÃn Greco
Date: Thu Apr 18 2019 - 12:14:44 EST
El 18/4/19 a las 12:56, Maxime Ripard escribió:
On Thu, Apr 18, 2019 at 12:11:20PM -0300, Pablo Greco wrote:
Since the bananapi-m2-ultra and the bananapi-m2-berry have the same
WiFi/Bluetooth, add the required nodes to the bananapi-m2-berry.
Signed-off-by: Pablo Greco <pgreco@xxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 26 +++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 78f4a1a..3d0bb7e 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -96,6 +96,8 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "ext_clock";
};
};
@@ -171,6 +173,11 @@
status = "okay";
};
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_out_a_pin>;
+};
+
I'm not sure you answered my question about why that is needed?
Because it is the same case as
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts?id=1e5f1db4ccd8348a21da55bff82f4263000879ef
I can repeat that info in this commit log
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Pablo.