[PATCH v2 8/8] s390: vfio-ap: update documentation
From: Tony Krowiak
Date: Sat Apr 20 2019 - 17:50:25 EST
Updates to the documentation to reflect changes introduced by
this patch series. This patch also clarifies the section on
configuring the apmask and aqmask.
Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
---
Documentation/s390/vfio-ap.txt | 188 +++++++++++++++++++++++++++++++++--------
1 file changed, 153 insertions(+), 35 deletions(-)
diff --git a/Documentation/s390/vfio-ap.txt b/Documentation/s390/vfio-ap.txt
index 65167cfe4485..66e05e56ac45 100644
--- a/Documentation/s390/vfio-ap.txt
+++ b/Documentation/s390/vfio-ap.txt
@@ -351,6 +351,9 @@ matrix device.
* matrix:
A read-only file for displaying the APQNs derived from the cross product
of the adapter and domain numbers assigned to the mediated matrix device.
+ * guest_matrix:
+ A read-only file for displaying the APQNs derived from the cross product
+ of adapter and domain numbers assigned to the guest matrix (i.e., CRYCB)
* assign_control_domain:
* unassign_control_domain:
Write-only attributes for assigning/unassigning an AP control domain
@@ -438,7 +441,33 @@ guest use.
Example:
=======
Let's now provide an example to illustrate how KVM guests may be given
-access to AP facilities. For this example, we will show how to configure
+access to AP facilities. Let's assume that the following AP devices are
+configured for the host:
+
+/sys/bus/ap/devices
+... 04.0004
+... 04.0005
+... 04.0006
+... 04.0047
+... 04.00ab
+... 04.00ff
+... 05.0004
+... 05.0005
+... 05.0006
+... 05.0047
+... 05.00ab
+... 05.00ff
+... 06.0004
+... 06.0005
+... 06.0006
+... 06.0047
+... 06.00ab
+... 06.00ff
+... card04
+... card05
+... card06
+
+For this example, we will show how to configure
three guests such that executing the lszcrypt command on the guests would
look like this:
@@ -461,7 +490,7 @@ CARD.DOMAIN TYPE MODE
05.0047 CEX5A Accelerator
05.00ff CEX5A Accelerator
-Guest2
+Guest3
------
CARD.DOMAIN TYPE MODE
------------------------------
@@ -538,7 +567,7 @@ These are the steps:
The APQN of each AP queue device assigned to the linux host is checked by the
AP bus against the set of APQNs derived from the cross product of APIDs
and APQIs marked as usable only by the default AP queue device drivers. If a
- match is detected, only the default AP queue device drivers will be probed;
+ match is detected, only the default AP queue device drivers will be probed;
otherwise, the vfio_ap device driver will be probed.
By default, the two masks are set to reserve all APQNs for use by the default
@@ -599,32 +628,75 @@ These are the steps:
default drivers pool: adapter 0-15, domain 1
alternate drivers pool: adapter 16-255, domains 0, 2-255
+ Note:
+
+ * Clearing a bit from the apmask renders all queues associated with
+ the corresponding adapter inaccessible to the host.
+
+ * Clearing a bit from the aqmask renders that queue inaccessible on all
+ adapters reserved for the host.
+
+ * When either mask is changed, the AP bus will reprobe all of the AP devices
+ to ensure each adapter card and queue is bound to the appropriate device
+ driver as specified by the apmask and aqmask. If the change results in
+ unbinding an AP queue with an APQN that is in use by a guest, the adapter
+ card with the specified APID will be hot unplugged from the guest. If the
+ change results in binding an AP queue with an APQN that is assigned to an
+ mdev device which is in use by a guest, the queue will be hot plugged into
+ the guest.
+
Securing the APQNs for our example:
----------------------------------
To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004, 06.0047,
- 06.00ab, and 06.00ff for use by the vfio_ap device driver, the corresponding
- APQNs can either be removed from the default masks:
+ 06.00ab, and 06.00ff for use by the vfio_ap device driver, either mask can
+ be edited.
+
+ To reserve all queues for adapters 05 and 06:
echo -5,-6 > /sys/bus/ap/apmask
+ or
+ echo 0xf9ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
+ > apmask
- echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
+ This would result in binding all available queues for adapters 05 and 06 to
+ the vfio_ap device driver:
- Or the masks can be set as follows:
+ /sys/bus/ap
+ ... [drivers]
+ ...... [vfio_ap]
+ ......... [05.0004]
+ ......... [05.0005]
+ ......... [05.0006]
+ ......... [05.0047]
+ ......... [05.00ab]
+ ......... [05.00ff]
+ ......... [06.0004]
+ ......... [06.0005]
+ ......... [06.0006]
+ ......... [06.0047]
+ ......... [06.00ab]
+ ......... [06.00ff]
- echo 0xf9ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
- > apmask
+ To reserve only the queues (thus allowing the adapters to be shared by the
+ host and guests):
+ echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
+ or
echo 0xf7fffffffffffffffeffffffffffffffffffffffffeffffffffffffffffffffe \
> aqmask
- This will result in AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004,
- 06.0047, 06.00ab, and 06.00ff getting bound to the vfio_ap device driver. The
- sysfs directory for the vfio_ap device driver will now contain symbolic links
- to the AP queue devices bound to it:
+ Or the masks can be set as follows:
+
+ This would result in binding only queues 4, 71 (0x47), 171 (0xab), and
+ 255 (0xff) all available adapters to the vfio_ap device driver:
/sys/bus/ap
... [drivers]
...... [vfio_ap]
+ ......... [04.0004]
+ ......... [04.0047]
+ ......... [04.00ab]
+ ......... [04.00ff]
......... [05.0004]
......... [05.0047]
......... [05.00ab]
@@ -709,6 +781,16 @@ These are the steps:
4. The administrator now needs to configure the matrixes for the mediated
devices $uuid1 (for Guest1), $uuid2 (for Guest2) and $uuid3 (for Guest3).
+ The matrix is configured by assigning adapters, domains, and control domains
+ to the mediated matrix device using its sysfs assignment interfaces.
+
+ For example, to assign adapters 4, 5, 6, 22 and 23:
+
+ echo 4 > assign_adapter
+ echo 5 > assign_adapter
+ echo 6 > assign_adapter
+ echo 22 > assign_adapter
+ echo 23 > assign_adapter
This is how the matrix is configured for Guest1:
@@ -748,11 +830,9 @@ These are the steps:
an error (ENODEV).
* All APQNs that can be derived from the adapter ID and the IDs of
- the previously assigned domains must be bound to the vfio_ap device
- driver. If no domains have yet been assigned, then there must be at least
- one APQN with the specified APID bound to the vfio_ap driver. If no such
- APQNs are bound to the driver, the operation will terminate with an
- error (EADDRNOTAVAIL).
+ the previously assigned domains must be available for use by the vfio_ap
+ device driver as specified by the bus's apmask and aqmask sysfs interfaces;
+ otherwise, the operation will terminate with an error (EADDRNOTAVAIL).
No APQN that can be derived from the adapter ID and the IDs of the
previously assigned domains can be assigned to another mediated matrix
@@ -767,11 +847,9 @@ These are the steps:
an error (ENODEV).
* All APQNs that can be derived from the domain ID and the IDs of
- the previously assigned adapters must be bound to the vfio_ap device
- driver. If no domains have yet been assigned, then there must be at least
- one APQN with the specified APQI bound to the vfio_ap driver. If no such
- APQNs are bound to the driver, the operation will terminate with an
- error (EADDRNOTAVAIL).
+ the previously assigned adapters must be available for use by the vfio_ap
+ device driver as specified by the bus's apmask and aqmask sysfs interfaces;
+ otherwise, the operation will terminate with an error (EADDRNOTAVAIL).
No APQN that can be derived from the domain ID and the IDs of the
previously assigned adapters can be assigned to another mediated matrix
@@ -788,7 +866,7 @@ These are the steps:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
-7. Start Guest2:
+6. Start Guest2:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
@@ -798,6 +876,16 @@ These are the steps:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
+Note that prior to starting a guest, if one or more of the the queues assigned
+to the guest's mdev device is unbound from the vfio_ap device driver, the
+guest will fail to start with error EADDRNOTAVAIL (cannot assign requested
+address). To display the guest's matrix:
+
+ cat /sys/devices/vfio-ap/matrix/$uuid/guest_matrix
+
+ Attempting to display the guest matrix when a guest is not using the matrix
+ mdev device will return an ENODEV (No such device) error.
+
When the guest is shut down, the mediated matrix devices may be removed.
Using our example again, to remove the mediated matrix device $uuid1:
@@ -822,16 +910,46 @@ Using our example again, to remove the mediated matrix device $uuid1:
host. If the mdev matrix device is removed, one may want to also reconfigure
the pool of adapters and queues reserved for use by the default drivers.
-Limitations
-===========
-* The KVM/kernel interfaces do not provide a way to prevent restoring an APQN
- to the default drivers pool of a queue that is still assigned to a mediated
- device in use by a guest. It is incumbent upon the administrator to
- ensure there is no mediated device in use by a guest to which the APQN is
- assigned lest the host be given access to the private data of the AP queue
- device such as a private key configured specifically for the guest.
+Hot plug/unplug using mdev device:
+=================================
+If a guest is using a matrix mdev device, AP resources can be plugged into and
+unplugged from the running guest by using the mdev device sysfs interfaces.
+For example:
+
+ * If adapter 5 is assigned to the matrix mdev device, it can be
+ unplugged from the running guest as follows:
-* Dynamically modifying the AP matrix for a running guest (which would amount to
- hot(un)plug of AP devices for the guest) is currently not supported
+ echo 5 > /sys/devices/vfio-ap/matrix/$uuid/unassign_adapter
-* Live guest migration is not supported for guests using AP devices.
+ * If domain 71 is not reserved for use by a zcrypt driver nor assigned to
+ another matrix mdev device, it can be plugged into a running guest as
+ follows:
+
+ echo 0x47 > /sys/devices/vfio-ap/matrix/$uuid/assign_domain
+
+If a queue that is in use by a guest is unbound from the vfio_ap device driver,
+the adapter to which the queue is connected will be unplugged from the
+guest. Likewise, if a queue is bound to a matrix mdev device to which the queue
+is assigned abd the mdev device is being used by a running guest, the queue
+will be plugged into the guest.
+
+Limitations
+===========
+* Live guest migration is not supported for guests using AP devices. The
+ AP devices being used by the guest must be unplugged before live migration
+ can be initiated. Hot plug/unplug of adapters, domains and control domains can
+ be done using the mediated matrix device sysfs assignment interfaces. To
+ unplug an adapter from a running guest, simply unassign it. For example, if
+ a guest is using adapters 0 through 15, they can be unplugged as follows:
+
+ echo 0 > unassign_adapter
+ echo 1 > unassign_adapter
+ echo 2 > unassign_adapter
+ ...
+ echo 15 > unassign_adapter
+
+ Note that if you unassign an adapter, all of the associated domains will also
+ become inaccessible on the guest, so it is only necessary to unassign
+ the adapters before live migration. After the live migration is complete,
+ the AP resources will have to be re-assigned to the mediated matrix device
+ on the target system.
--
2.7.4