Re: [EXT] Re: [PATCH v5] arm64: dts: ls1088a: add one more thermal zone node

From: Shawn Guo
Date: Sun Apr 21 2019 - 02:46:17 EST


On Thu, Apr 18, 2019 at 03:28:56AM +0000, Andy Tang wrote:
>
> > -----Original Message-----
> > From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> > Sent: 2019å4æ12æ 20:19
> > To: Andy Tang <andy.tang@xxxxxxx>; shawnguo@xxxxxxxxxx
> > Cc: Leo Li <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx; rui.zhang@xxxxxxxxx;
> > edubezval@xxxxxxxxx
> > Subject: Re: [EXT] Re: [PATCH v5] arm64: dts: ls1088a: add one more thermal
> > zone node
> >
> > WARNING: This email was created outside of NXP. DO NOT CLICK links or
> > attachments unless you recognize the sender and know the content is safe.
> >
> >
> >
> > On 12/04/2019 09:47, Andy Tang wrote:
> > >
> > >> -----Original Message-----
> > >> From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> > >> Sent: 2019å4æ12æ 3:15
> > >> To: Andy Tang <andy.tang@xxxxxxx>; shawnguo@xxxxxxxxxx
> > >> Cc: Leo Li <leoyang.li@xxxxxxx>; robh+dt@xxxxxxxxxx;
> > >> mark.rutland@xxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > >> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > >> linux-pm@xxxxxxxxxxxxxxx; rui.zhang@xxxxxxxxx; edubezval@xxxxxxxxx
> > >> Subject: [EXT] Re: [PATCH v5] arm64: dts: ls1088a: add one more
> > >> thermal zone node
> > >>
> > >> WARNING: This email was created outside of NXP. DO NOT CLICK links or
> > >> attachments unless you recognize the sender and know the content is safe.
> > >>
> > >>
> > >>
> > >> On 11/04/2019 10:32, Yuantian Tang wrote:
> > >>> Ls1088a has 2 thermal sensors, core cluster and SoC platform. Core
> > >>> cluster sensor is used to monitor the temperature of core and SoC
> > >>> platform is for platform. The current dts only support the first sensor.
> > >>> This patch adds the second sensor node to dts to enable it.
> > >>>
> > >>> Signed-off-by: Yuantian Tang <andy.tang@xxxxxxx>
> > >>> ---
> > >>> v5:
> > >>> - update the thermal zone name due to the length limitation
> > >>> - remove cooling map in platform zone
> > >>> v4:
> > >>> - use hyphen instead of underscore in node name
> > >>> v3:
> > >>> - use more descriptive name for each zone
> > >>> v2:
> > >>> - Add more information about sensors to description
> > >>> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 28
> > >> ++++++++++++++++++++---
> > >>> 1 files changed, 24 insertions(+), 4 deletions(-)
> > >>>
> > >>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > >>> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > >>> index de93b42..de39672 100644
> > >>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > >>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > >>> @@ -129,19 +129,19 @@
> > >>> };
> > >>>
> > >>> thermal-zones {
> > >>> - cpu_thermal: cpu-thermal {
> > >>> + core-cluster {
> > >>> polling-delay-passive = <1000>;
> > >>> polling-delay = <5000>;
> > >>> thermal-sensors = <&tmu 0>;
> > >>>
> > >>> trips {
> > >>> - cpu_alert: cpu-alert {
> > >>> + core_cluster_alert: core-cluster-alert
> > >>> + {
> > >>> temperature = <85000>;
> > >>> hysteresis = <2000>;
> > >>> type = "passive";
> > >>> };
> > >>>
> > >>> - cpu_crit: cpu-crit {
> > >>> + core_cluster_crit: core-cluster-crit {
> > >>> temperature = <95000>;
> > >>> hysteresis = <2000>;
> > >>> type = "critical"; @@ -150,7
> > >>> +150,7 @@
> > >>>
> > >>> cooling-maps {
> > >>> map0 {
> > >>> - trip = <&cpu_alert>;
> > >>> + trip = <&core_cluster_alert>;
> > >>> cooling-device =
> > >>> <&cpu0
> > >> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > >>> <&cpu1
> > >> THERMAL_NO_LIMIT
> > >>> THERMAL_NO_LIMIT>, @@ -163,6 +163,26 @@
> > >>> };
> > >>> };
> > >>> };
> > >>> +
> > >>> + platform {
> > >>> + polling-delay-passive = <1000>;
> > >>> + polling-delay = <5000>;
> > >>> + thermal-sensors = <&tmu 1>;
> > >>> +
> > >>> + trips {
> > >>> + platform-alert {
> > >>> + temperature = <85000>;
> > >>> + hysteresis = <2000>;
> > >>> + type = "passive";
> > >>> + };
> > >>> +
> > >>> + platform-crit {
> > >>> + temperature = <95000>;
> > >>> + hysteresis = <2000>;
> > >>> + type = "critical";
> > >>> + };
> > >>> + };
> > >>> + };
> > >>
> > >>
> > >> Unfortunately, the documentation says the thermal zone node must
> > >> contain a "cooling-maps" entry.
> > > That's a question.
> > > If I add "cooling-maps", then multiple zones will use same cooling device.
> > > If I don't, documentation says it is a " Required properties".
> > > I am wondering how it was dealt with on other platform supporting multiple
> > zones.
> >
> > I think the problem comes from the fact there are no governors capable of
> > handling multiple thermal zones.
> >
> > The additional cooling device is the devfreq but as the mali driver is not
> > upstream, the cooling map for this device does not appear. We can find the
> > definitions and the driver in the AOSP [1].
> >
> > Moreover, the power is usually managed by the IPA governor, but this one can
> > not handle multiple thermal zones, so the cooling devices are joined together
> > into a single thermal zone with their contribution to the cooling effect.
> >
> > Other definitions I have seen upstream are incomplete or broken.
> >
> > [1]
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fandroid.g
> > ooglesource.com%2Fkernel%2Fhikey-linaro%2F%2B%2Frefs%2Fheads%2Fandr
> > oid-hikey-linaro-4.14%2Farch%2Farm64%2Fboot%2Fdts%2Fhisilicon%2Fhi3660.
> > dtsi%231340&amp;data=02%7C01%7Candy.tang%40nxp.com%7C559218b1622e
> > 4603251908d6bf410e4b%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7
> > C636906683466836985&amp;sdata=952xIcrr11g%2B0nl2lgKrG18SlRVgGV6L%2
> > BMBL3U6UaiQ%3D&amp;reserved=0
> Interesting. I think we have to accept the imperfect for now.
>
> Hi Shawn,
> Any comments?

Sorry. I'm not going to take a DTS change that contradicts with
bindings. If you think bindings is not reasonable, change the bindings
first.

Shawn