Re: [PATCH v2 1/3] ARM: dts: armada-38x: add interrupts for watchdog
From: Gregory CLEMENT
Date: Sun Apr 21 2019 - 13:24:42 EST
Hi Chris,
> The first interrupt is for the regular watchdog timeout. Normally the
> RSTOUT line will trigger a reset before this interrupt fires but on
> systems with a non-standard reset it may still trigger.
>
> The second interrupt is for a timer1 which is used as a pre-timeout for
> the watchdog.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - new, split out from "watchdog: orion_wdt: use timer1 as a pretimeout"
>
> arch/arm/boot/dts/armada-38x.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
Applied on mvebu/dt
Thanks,
Gregory
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 929459c42760..fc550c640ca8 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -376,6 +376,8 @@
> reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
> clocks = <&coreclk 2>, <&refclk>;
> clock-names = "nbclk", "fixed";
> + interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> cpurst: cpurst@20800 {
> --
> 2.21.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com