[PATCH] habanalabs: use ASIC functions interface for rreg/wreg

[Oded Gabbay]

This patch slightly changes the macros of RREG32 and WREG32, which are
used when reading or writing from registers.

Instead of directly calling a function in the common code from these
macros, the new code calls a function from the ASIC functions interface.

This change allows us to share much more code between real ASICs and
simulators, which in turn reduces the maintenance burden and
the chances for forgetting to port code between the ASIC files.

The patch also implements the hl_poll_timeout macro, instead of calling
the generic readl_poll_timeout macro. This is required to allow use of
this macro in the simulator files.

Signed-off-by: Oded Gabbay <oded.gabbay@xxxxxxxxx>
---
 drivers/misc/habanalabs/goya/goya.c  |  4 +++-
 drivers/misc/habanalabs/habanalabs.h | 32 ++++++++++++++++++++++------
 2 files changed, 29 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 3f707e8c408a..49c4f02aa4e3 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -4829,7 +4829,9 @@ static const struct hl_asic_funcs goya_funcs = {
 	.get_hw_state = goya_get_hw_state,
 	.pci_bars_map = goya_pci_bars_map,
 	.set_dram_bar_base = goya_set_ddr_bar_base,
-	.init_iatu = goya_init_iatu
+	.init_iatu = goya_init_iatu,
+	.rreg = hl_rreg,
+	.wreg = hl_wreg
 };
 
 /*
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h
index 86bd5298efd6..e8bbaf0f26c1 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/habanalabs.h
@@ -489,6 +489,8 @@ enum hl_pll_frequency {
  * @pci_bars_map: Map PCI BARs.
  * @set_dram_bar_base: Set DRAM BAR to map specific device address.
  * @init_iatu: Initialize the iATU unit inside the PCI controller.
+ * @rreg: Read a register. Needed for simulator support.
+ * @wreg: Write a register. Needed for simulator support.
  */
 struct hl_asic_funcs {
 	int (*early_init)(struct hl_device *hdev);
@@ -564,6 +566,8 @@ struct hl_asic_funcs {
 	int (*pci_bars_map)(struct hl_device *hdev);
 	int (*set_dram_bar_base)(struct hl_device *hdev, u64 addr);
 	int (*init_iatu)(struct hl_device *hdev);
+	u32 (*rreg)(struct hl_device *hdev, u32 reg);
+	void (*wreg)(struct hl_device *hdev, u32 reg, u32 val);
 };
 
 
@@ -1007,13 +1011,10 @@ struct hl_dbg_device_entry {
 u32 hl_rreg(struct hl_device *hdev, u32 reg);
 void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
 
-#define hl_poll_timeout(hdev, addr, val, cond, sleep_us, timeout_us) \
-	readl_poll_timeout(hdev->rmmio + addr, val, cond, sleep_us, timeout_us)
-
-#define RREG32(reg) hl_rreg(hdev, (reg))
-#define WREG32(reg, v) hl_wreg(hdev, (reg), (v))
+#define RREG32(reg) hdev->asic_funcs->rreg(hdev, (reg))
+#define WREG32(reg, v) hdev->asic_funcs->wreg(hdev, (reg), (v))
 #define DREG32(reg) pr_info("REGISTER: " #reg " : 0x%08X\n",	\
-				hl_rreg(hdev, (reg)))
+			hdev->asic_funcs->rreg(hdev, (reg)))
 
 #define WREG32_P(reg, val, mask)				\
 	do {							\
@@ -1031,6 +1032,25 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
 	WREG32(mm##reg, (RREG32(mm##reg) & ~REG_FIELD_MASK(reg, field)) | \
 			(val) << REG_FIELD_SHIFT(reg, field))
 
+#define hl_poll_timeout(hdev, addr, val, cond, sleep_us, timeout_us) \
+({ \
+	ktime_t __timeout = ktime_add_us(ktime_get(), timeout_us); \
+	might_sleep_if(sleep_us); \
+	for (;;) { \
+		(val) = RREG32(addr); \
+		if (cond) \
+			break; \
+		if (timeout_us && ktime_compare(ktime_get(), __timeout) > 0) { \
+			(val) = RREG32(addr); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range((sleep_us >> 2) + 1, sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+
 #define HL_ENG_BUSY(buf, size, fmt, ...) ({ \
 		if (buf) \
 			snprintf(buf, size, fmt, ##__VA_ARGS__); \
-- 
2.17.1