[PATCH v2 19/79] docs: kdump: convert docs to ReST and rename to *.rst

From: Mauro Carvalho Chehab
Date: Mon Apr 22 2019 - 09:29:29 EST

Convert kdump documentation to ReST and add it to the
user faced manual, as the documents are mainly focused on
sysadmins that would be enabling kdump.

Note: the vmcoreinfo.rst has one very long title on one of its
sub-sections:

PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)

I opted to break this one, into two entries with the same content,
in order to make it easier to display after being parsed in html and PDF.

The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
Documentation/admin-guide/bug-hunting.rst | 2 +-
.../admin-guide/kernel-parameters.txt | 6 +-
Documentation/kdump/index.rst | 21 +++
Documentation/kdump/{kdump.txt => kdump.rst} | 131 +++++++++++-------
.../kdump/{vmcoreinfo.txt => vmcoreinfo.rst} | 59 ++++----
.../powerpc/firmware-assisted-dump.txt | 2 +-
.../translations/zh_CN/oops-tracing.txt | 2 +-
Documentation/watchdog/hpwdt.txt | 2 +-
arch/arm/Kconfig | 2 +-
arch/arm64/Kconfig | 2 +-
arch/sh/Kconfig | 2 +-
arch/x86/Kconfig | 4 +-
12 files changed, 137 insertions(+), 98 deletions(-)
create mode 100644 Documentation/kdump/index.rst
rename Documentation/kdump/{kdump.txt => kdump.rst} (91%)
rename Documentation/kdump/{vmcoreinfo.txt => vmcoreinfo.rst} (95%)

diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst
index f278b289e260..b761aa2a51d2 100644
--- a/Documentation/admin-guide/bug-hunting.rst
+++ b/Documentation/admin-guide/bug-hunting.rst
@@ -90,7 +90,7 @@ the disk is not available then you have three options:
run a null modem to a second machine and capture the output there
using your favourite communication program. Minicom works well.

-(3) Use Kdump (see Documentation/kdump/kdump.txt),
+(3) Use Kdump (see Documentation/kdump/kdump.rst),
extract the kernel ring buffer from old memory with using dmesg
gdbmacro in Documentation/kdump/gdbmacros.txt.

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index bfe926a7b15f..a4e8e6435fff 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -705,14 +705,14 @@
memory region [offset, offset + size] for that kernel
image. If '@offset' is omitted, then a suitable offset
is selected automatically. Check
- Documentation/kdump/kdump.txt for further details.
+ Documentation/kdump/kdump.rst for further details.

crashkernel=range1:size1[,range2:size2,...][@offset]
[KNL] Same as above, but depends on the memory
in the running system. The syntax of range is
start-[end] where start and end are both
a memory unit (amount[KMG]). See also
- Documentation/kdump/kdump.txt for an example.
+ Documentation/kdump/kdump.rst for an example.

crashkernel=size[KMG],high
[KNL, x86_64] range could be above 4G. Allow kernel
@@ -1206,7 +1206,7 @@
Specifies physical address of start of kernel core
image elf header and optionally the size. Generally
kexec loader will pass this option to capture kernel.
- See Documentation/kdump/kdump.txt for details.
+ See Documentation/kdump/kdump.rst for details.

enable_mtrr_cleanup [X86]
The kernel tries to adjust MTRR layout from continuous
diff --git a/Documentation/kdump/index.rst b/Documentation/kdump/index.rst
new file mode 100644
index 000000000000..2b17fcf6867a
--- /dev/null
+++ b/Documentation/kdump/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+================================================================
+Documentation for Kdump - The kexec-based Crash Dumping Solution
+================================================================
+
+This document includes overview, setup and installation, and analysis
+information.
+
+.. toctree::
+ :maxdepth: 1
+
+ kdump
+ vmcoreinfo
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.rst
similarity index 91%
rename from Documentation/kdump/kdump.txt
rename to Documentation/kdump/kdump.rst
index 51814450a7f8..1da2d7b765f6 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.rst
@@ -71,9 +71,8 @@ This is a symlink to the latest version.

The latest kexec-tools git tree is available at:

-git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
-and
-http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+- git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+- http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git

There is also a gitweb interface available at
http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
@@ -81,25 +80,25 @@ http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
More information about kexec-tools can be found at
http://horms.net/projects/kexec/

-3) Unpack the tarball with the tar command, as follows:
+3) Unpack the tarball with the tar command, as follows::

- tar xvpzf kexec-tools.tar.gz
+ tar xvpzf kexec-tools.tar.gz

-4) Change to the kexec-tools directory, as follows:
+4) Change to the kexec-tools directory, as follows::

- cd kexec-tools-VERSION
+ cd kexec-tools-VERSION

-5) Configure the package, as follows:
+5) Configure the package, as follows::

- ./configure
+ ./configure

-6) Compile the package, as follows:
+6) Compile the package, as follows::

- make
+ make

-7) Install the package, as follows:
+7) Install the package, as follows::

- make install
+ make install


Build the system and dump-capture kernels
@@ -126,25 +125,25 @@ dump-capture kernels for enabling kdump support.
System kernel config options
----------------------------

-1) Enable "kexec system call" in "Processor type and features."
+1) Enable "kexec system call" in "Processor type and features."::

- CONFIG_KEXEC=y
+ CONFIG_KEXEC=y

2) Enable "sysfs file system support" in "Filesystem" -> "Pseudo
- filesystems." This is usually enabled by default.
+ filesystems." This is usually enabled by default::

- CONFIG_SYSFS=y
+ CONFIG_SYSFS=y

Note that "sysfs file system support" might not appear in the "Pseudo
filesystems" menu if "Configure standard kernel features (for small
systems)" is not enabled in "General Setup." In this case, check the
- .config file itself to ensure that sysfs is turned on, as follows:
+ .config file itself to ensure that sysfs is turned on, as follows::

- grep 'CONFIG_SYSFS' .config
+ grep 'CONFIG_SYSFS' .config

-3) Enable "Compile the kernel with debug info" in "Kernel hacking."
+3) Enable "Compile the kernel with debug info" in "Kernel hacking."::

- CONFIG_DEBUG_INFO=Y
+ CONFIG_DEBUG_INFO=Y

This causes the kernel to be built with debug symbols. The dump
analysis tools require a vmlinux with debug symbols in order to read
@@ -154,29 +153,32 @@ Dump-capture kernel config options (Arch Independent)
-----------------------------------------------------

1) Enable "kernel crash dumps" support under "Processor type and
- features":
+ features"::

- CONFIG_CRASH_DUMP=y
+ CONFIG_CRASH_DUMP=y

-2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems".
+2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems"::
+
+ CONFIG_PROC_VMCORE=y

- CONFIG_PROC_VMCORE=y
(CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)

Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
--------------------------------------------------------------------

1) On i386, enable high memory support under "Processor type and
- features":
+ features"::

- CONFIG_HIGHMEM64G=y
- or
- CONFIG_HIGHMEM4G
+ CONFIG_HIGHMEM64G=y
+
+ or::
+
+ CONFIG_HIGHMEM4G

2) On i386 and x86_64, disable symmetric multi-processing support
- under "Processor type and features":
+ under "Processor type and features"::

- CONFIG_SMP=n
+ CONFIG_SMP=n

(If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
when loading the dump-capture kernel, see section "Load the Dump-capture
@@ -184,9 +186,9 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)

3) If one wants to build and use a relocatable kernel,
Enable "Build a relocatable kernel" support under "Processor type and
- features"
+ features"::

- CONFIG_RELOCATABLE=y
+ CONFIG_RELOCATABLE=y

4) Use a suitable value for "Physical address where the kernel is
loaded" (under "Processor type and features"). This only appears when
@@ -211,13 +213,13 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
Dump-capture kernel config options (Arch Dependent, ppc64)
----------------------------------------------------------

-1) Enable "Build a kdump crash kernel" support under "Kernel" options:
+1) Enable "Build a kdump crash kernel" support under "Kernel" options::

- CONFIG_CRASH_DUMP=y
+ CONFIG_CRASH_DUMP=y

-2) Enable "Build a relocatable kernel" support
+2) Enable "Build a relocatable kernel" support::

- CONFIG_RELOCATABLE=y
+ CONFIG_RELOCATABLE=y

Make and install the kernel and its modules.

@@ -231,11 +233,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)

The crashkernel region can be automatically placed by the system
kernel at run time. This is done by specifying the base address as 0,
- or omitting it all together.
+ or omitting it all together::

- crashkernel=256M@0
- or
- crashkernel=256M
+ crashkernel=256M@0
+
+ or::
+
+ crashkernel=256M

If the start address is specified, note that the start address of the
kernel will be aligned to 64Mb, so if the start address is not then
@@ -245,9 +249,9 @@ Dump-capture kernel config options (Arch Dependent, arm)
----------------------------------------------------------

- To use a relocatable kernel,
- Enable "AUTO_ZRELADDR" support under "Boot" options:
+ Enable "AUTO_ZRELADDR" support under "Boot" options::

- AUTO_ZRELADDR=y
+ AUTO_ZRELADDR=y

Dump-capture kernel config options (Arch Dependent, arm64)
----------------------------------------------------------
@@ -265,12 +269,12 @@ on the value of System RAM -- that's mostly for distributors that pre-setup
the kernel command line to avoid a unbootable system after some memory has
been removed from the machine.

-The syntax is:
+The syntax is::

crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
range=start-[end]

-For example:
+For example::

crashkernel=512M-2G:64M,2G-:128M

@@ -326,35 +330,46 @@ can choose to load the uncompressed vmlinux or compressed bzImage/vmlinuz
of dump-capture kernel. Following is the summary.

For i386 and x86_64:
+
- Use vmlinux if kernel is not relocatable.
- Use bzImage/vmlinuz if kernel is relocatable.
+
For ppc64:
+
- Use vmlinux
+
For ia64:
+
- Use vmlinux or vmlinuz.gz
+
For s390x:
+
- Use image or bzImage
+
For arm:
+
- Use zImage
+
For arm64:
+
- Use vmlinux or Image

If you are using an uncompressed vmlinux image then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::

kexec -p <dump-capture-kernel-vmlinux-image> \
--initrd=<initrd-for-dump-capture-kernel> --args-linux \
--append="root=<root-dev> <arch-specific-options>"

If you are using a compressed bzImage/vmlinuz, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::

kexec -p <dump-capture-kernel-bzImage> \
--initrd=<initrd-for-dump-capture-kernel> \
--append="root=<root-dev> <arch-specific-options>"

If you are using a compressed zImage, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::

kexec --type zImage -p <dump-capture-kernel-bzImage> \
--initrd=<initrd-for-dump-capture-kernel> \
@@ -362,7 +377,7 @@ to load dump-capture kernel.
--append="root=<root-dev> <arch-specific-options>"

If you are using an uncompressed Image, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::

kexec -p <dump-capture-kernel-Image> \
--initrd=<initrd-for-dump-capture-kernel> \
@@ -376,18 +391,23 @@ Following are the arch specific command line options to be used while
loading dump-capture kernel.

For i386, x86_64 and ia64:
+
"1 irqpoll maxcpus=1 reset_devices"

For ppc64:
+
"1 maxcpus=1 noirqdistrib reset_devices"

For s390x:
+
"1 maxcpus=1 cgroup_disable=memory"

For arm:
+
"1 maxcpus=1 reset_devices"

For arm64:
+
"1 maxcpus=1 reset_devices"

Notes on loading the dump-capture kernel:
@@ -464,7 +484,7 @@ Write Out the Dump File
=======================

After the dump-capture kernel is booted, write out the dump file with
-the following command:
+the following command::

cp /proc/vmcore <dump-file>

@@ -476,7 +496,7 @@ Before analyzing the dump image, you should reboot into a stable kernel.

You can do limited analysis using GDB on the dump file copied out of
/proc/vmcore. Use the debug vmlinux built with -g and run the following
-command:
+command::

gdb vmlinux <dump-file>

@@ -504,6 +524,11 @@ to achieve the same behaviour.
Contact
=======

-Vivek Goyal (vgoyal@xxxxxxxxxx)
-Maneesh Soni (maneesh@xxxxxxxxxx)
+- Vivek Goyal (vgoyal@xxxxxxxxxx)
+- Maneesh Soni (maneesh@xxxxxxxxxx)

+GDB macros
+==========
+
+.. include:: gdbmacros.txt
+ :literal:
diff --git a/Documentation/kdump/vmcoreinfo.txt b/Documentation/kdump/vmcoreinfo.rst
similarity index 95%
rename from Documentation/kdump/vmcoreinfo.txt
rename to Documentation/kdump/vmcoreinfo.rst
index bb94a4bd597a..007a6b86e0ee 100644
--- a/Documentation/kdump/vmcoreinfo.txt
+++ b/Documentation/kdump/vmcoreinfo.rst
@@ -1,8 +1,7 @@
-================================================================
- VMCOREINFO
-================================================================
+==========
+VMCOREINFO
+==========

-===========
What is it?
===========

@@ -12,7 +11,6 @@ values, field offsets, etc. These data are packed into an ELF note
section and used by user-space tools like crash and makedumpfile to
analyze a kernel's memory layout.

-================
Common variables
================

@@ -49,7 +47,7 @@ in a system, one bit position per node number. Used to keep track of
which nodes are in the system and online.

swapper_pg_dir
--------------
+--------------

The global page directory pointer of the kernel. Used to translate
virtual to physical addresses.
@@ -132,16 +130,14 @@ nodemask_t
The size of a nodemask_t type. Used to compute the number of online
nodes.

-(page, flags|_refcount|mapping|lru|_mapcount|private|compound_dtor|
- compound_order|compound_head)
--------------------------------------------------------------------
+(page, flags|_refcount|mapping|lru|_mapcount|private|compound_dtor|compound_order|compound_head)
+-------------------------------------------------------------------------------------------------

User-space tools compute their values based on the offset of these
variables. The variables are used when excluding unnecessary pages.

-(pglist_data, node_zones|nr_zones|node_mem_map|node_start_pfn|node_
- spanned_pages|node_id)
--------------------------------------------------------------------
+(pglist_data, node_zones|nr_zones|node_mem_map|node_start_pfn|node_spanned_pages|node_id)
+-----------------------------------------------------------------------------------------

On NUMA machines, each NUMA node has a pg_data_t to describe its memory
layout. On UMA machines there is a single pglist_data which describes the
@@ -245,21 +241,25 @@ NR_FREE_PAGES
On linux-2.6.21 or later, the number of free pages is in
vm_stat[NR_FREE_PAGES]. Used to get the number of free pages.

-PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision
-|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)
-|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
------------------------------------------------------------------
+PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask
+------------------------------------------------------------------------------

Page attributes. These flags are used to filter various unnecessary for
dumping pages.

+PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
+-----------------------------------------------------------------------------
+
+More page attributes. These flags are used to filter various unnecessary for
+dumping pages.
+
+
HUGETLB_PAGE_DTOR
-----------------

The HUGETLB_PAGE_DTOR flag denotes hugetlbfs pages. Makedumpfile
excludes these pages.

-======
x86_64
======

@@ -318,12 +318,12 @@ address.
Currently, sme_mask stores the value of the C-bit position. If needed,
additional SME-relevant info can be placed in that variable.

-For example:
-[ misc ][ enc bit ][ other misc SME info ]
-0000_0000_0000_0000_1000_0000_0000_0000_0000_0000_..._0000
-63 59 55 51 47 43 39 35 31 27 ... 3
+For example::
+
+ [ misc ][ enc bit ][ other misc SME info ]
+ 0000_0000_0000_0000_1000_0000_0000_0000_0000_0000_..._0000
+ 63 59 55 51 47 43 39 35 31 27 ... 3

-======
x86_32
======

@@ -335,7 +335,6 @@ of a higher page table lookup overhead, and also consumes more page
table space per process. Used to check whether PAE was enabled in the
crash kernel when converting virtual addresses to physical addresses.

-====
ia64
====

@@ -366,7 +365,6 @@ PGTABLE_3|PGTABLE_4
User-space tools need to know whether the crash kernel was in 3-level or
4-level paging mode. Used to distinguish the page table.

-=====
ARM64
=====

@@ -395,9 +393,8 @@ KERNELOFFSET
The kernel randomization offset. Used to compute the page offset. If
KASLR is disabled, this value is zero.

-====
arm
-====
+===

ARM_LPAE
--------
@@ -405,12 +402,11 @@ ARM_LPAE
It indicates whether the crash kernel supports large physical address
extensions. Used to translate virtual to physical addresses.

-====
s390
====

lowcore_ptr
-----------
+-----------

An array with a pointer to the lowcore of every CPU. Used to print the
psw and all registers information.
@@ -425,7 +421,6 @@ Used to get the vmalloc_start address from the high_memory symbol.

The maximum number of CPUs.

-=======
powerpc
=======

@@ -460,9 +455,8 @@ Page size definitions, i.e. 4k, 64k, or 16M.

Used to make vtop translations.

-vmemmap_backing|(vmemmap_backing, list)|(vmemmap_backing, phys)|
-(vmemmap_backing, virt_addr)
-----------------------------------------------------------------
+vmemmap_backing|(vmemmap_backing, list)|(vmemmap_backing, phys)|(vmemmap_backing, virt_addr)
+--------------------------------------------------------------------------------------------

The vmemmap virtual address space management does not have a traditional
page table to track which virtual struct pages are backed by a physical
@@ -480,7 +474,6 @@ member.

Used in vtop translations.

-==
sh
==

diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt
index 18c5feef2577..0c41d6d463f3 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.txt
@@ -59,7 +59,7 @@ as follows:
the default calculated size. Use this option if default
boot memory size is not sufficient for second kernel to
boot successfully. For syntax of crashkernel= parameter,
- refer to Documentation/kdump/kdump.txt. If any offset is
+ refer to Documentation/kdump/kdump.rst. If any offset is
provided in crashkernel= parameter, it will be ignored
as fadump uses a predefined offset to reserve memory
for boot memory dump preservation in case of a crash.
diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt
index 93fa061cf9e4..368ddd05b304 100644
--- a/Documentation/translations/zh_CN/oops-tracing.txt
+++ b/Documentation/translations/zh_CN/oops-tracing.txt
@@ -53,7 +53,7 @@ cat /proc/kmsg > fileï çèäåéäåäæäèï kmsgæääâ
ï2ïçäåççååïèåçDocumentation/admin-guide/serial-console.rstïïèèäänull
modemååäåæååçäåæçéèååèåèåãMinicomåäåååã

-ï3ïäçKdumpïèåçDocumentation/kdump/kdump.txtïï
+ï3ïäçKdumpïèåçDocumentation/kdump/kdump.rstïï
äçåDocumentation/kdump/gdbmacros.txtäåäçdmesg gdbåïäæçååäæååæ
çåçååã

diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 55df692c5595..aaa9e4b4bdcd 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -51,7 +51,7 @@ Last reviewed: 08/20/2018
and loop forever. This is generally not what a watchdog user wants.

For those wishing to learn more please see:
- Documentation/kdump/kdump.txt
+ Documentation/kdump/kdump.rst
Documentation/admin-guide/kernel-parameters.txt (panic=)
Your Linux Distribution specific documentation.

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b509cd338219..c81ee94e8256 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2007,7 +2007,7 @@ config CRASH_DUMP
kdump/kexec. The crash dump kernel must be compiled to a
memory address not used by the main kernel

- For more details see Documentation/kdump/kdump.txt
+ For more details see Documentation/kdump/kdump.rst

config AUTO_ZRELADDR
bool "Auto calculation of the decompressed kernel image address"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8e33203e3583..e67ad4dad1cf 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -974,7 +974,7 @@ config CRASH_DUMP
reserved region and then later executed after a crash by
kdump/kexec.

- For more details see Documentation/kdump/kdump.txt
+ For more details see Documentation/kdump/kdump.rst

config XEN_DOM0
def_bool y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2a77033e1e7c..9883516e682c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -624,7 +624,7 @@ config CRASH_DUMP
to a memory address not used by the main kernel using
PHYSICAL_START.

- For more details see Documentation/kdump/kdump.txt
+ For more details see Documentation/kdump/kdump.rst

config KEXEC_JUMP
bool "kexec jump (EXPERIMENTAL)"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 17f01a0800b3..bd8dea466b04 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2038,7 +2038,7 @@ config CRASH_DUMP
to a memory address not used by the main kernel or BIOS using
PHYSICAL_START, or it must be built as a relocatable image
(CONFIG_RELOCATABLE=y).
- For more details see Documentation/kdump/kdump.txt
+ For more details see Documentation/kdump/kdump.rst

config KEXEC_JUMP
bool "kexec jump"
@@ -2075,7 +2075,7 @@ config PHYSICAL_START
the reserved region. In other words, it can be set based on
the "X" value as specified in the "crashkernel=YM@XM"
command line boot parameter passed to the panic-ed
- kernel. Please take a look at Documentation/kdump/kdump.txt
+ kernel. Please take a look at Documentation/kdump/kdump.rst
for more details about crash dumps.

Usage of bzImage for capturing the crash dump is recommended as
--
2.20.1