[PATCH v2 2/7] mfd: max77620: Support Maxim 77663

From: Dmitry Osipenko
Date: Mon Apr 22 2019 - 15:19:34 EST


Add support for Maxim 77663 using the Max77620 driver. The hardware
is very similar to Max77663/20024, although there are couple minor
differences.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/mfd/max77620.c | 69 +++++++++++++++++++++++++++++++++++-
include/linux/mfd/max77620.h | 1 +
2 files changed, 69 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
index d8ddd1a6f304..9b0009c29610 100644
--- a/drivers/mfd/max77620.c
+++ b/drivers/mfd/max77620.c
@@ -111,6 +111,26 @@ static const struct mfd_cell max20024_children[] = {
},
};

+static const struct mfd_cell max77663_children[] = {
+ { .name = "max77620-pinctrl", },
+ { .name = "max77620-clock", },
+ { .name = "max77663-pmic", },
+ { .name = "max77620-watchdog", },
+ {
+ .name = "max77620-gpio",
+ .resources = gpio_resources,
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ }, {
+ .name = "max77620-rtc",
+ .resources = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ }, {
+ .name = "max77663-power",
+ .resources = power_resources,
+ .num_resources = ARRAY_SIZE(power_resources),
+ },
+};
+
static const struct regmap_range max77620_readable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
};
@@ -171,6 +191,35 @@ static const struct regmap_config max20024_regmap_config = {
.volatile_table = &max77620_volatile_table,
};

+static const struct regmap_range max77663_readable_ranges[] = {
+ regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_readable_table = {
+ .yes_ranges = max77663_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
+};
+
+static const struct regmap_range max77663_writable_ranges[] = {
+ regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_writable_table = {
+ .yes_ranges = max77663_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
+};
+
+static const struct regmap_config max77663_regmap_config = {
+ .name = "power-slave",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77620_REG_CID5 + 1,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &max77663_readable_table,
+ .wr_table = &max77663_writable_table,
+ .volatile_table = &max77620_volatile_table,
+};
+
/*
* MAX77620 and MAX20024 has the following steps of the interrupt handling
* for TOP interrupts:
@@ -237,6 +286,9 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
case MAX20024:
fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
break;
+ case MAX77663:
+ fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
+ break;
case MAX77620:
fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
break;
@@ -274,6 +326,9 @@ static int max77620_config_fps(struct max77620_chip *chip,
case MAX77620:
fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
break;
+ case MAX77663:
+ fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
+ break;
default:
return -EINVAL;
}
@@ -375,6 +430,9 @@ static int max77620_initialise_fps(struct max77620_chip *chip)
}

skip_fps:
+ if (chip->chip_id == MAX77663)
+ return 0;
+
/* Enable wake on EN0 pin */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0,
@@ -453,6 +511,11 @@ static int max77620_probe(struct i2c_client *client,
n_mfd_cells = ARRAY_SIZE(max20024_children);
rmap_config = &max20024_regmap_config;
break;
+ case MAX77663:
+ mfd_cells = max77663_children;
+ n_mfd_cells = ARRAY_SIZE(max77663_children);
+ rmap_config = &max77663_regmap_config;
+ break;
default:
dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
return -EINVAL;
@@ -546,6 +609,9 @@ static int max77620_i2c_suspend(struct device *dev)
return ret;
}

+ if (chip->chip_id == MAX77663)
+ goto out;
+
/* Disable WK_EN0 */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0, 0);
@@ -581,7 +647,7 @@ static int max77620_i2c_resume(struct device *dev)
* For MAX20024: No need to configure WKEN0 on resume as
* it is configured on Init.
*/
- if (chip->chip_id == MAX20024)
+ if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
goto out;

/* Enable WK_EN0 */
@@ -603,6 +669,7 @@ static int max77620_i2c_resume(struct device *dev)
static const struct i2c_device_id max77620_id[] = {
{"max77620", MAX77620},
{"max20024", MAX20024},
+ {"max77663", MAX77663},
{},
};

diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
index b4fd5a7c2aaa..82407fe85ca2 100644
--- a/include/linux/mfd/max77620.h
+++ b/include/linux/mfd/max77620.h
@@ -324,6 +324,7 @@ enum max77620_fps_src {
enum max77620_chip_id {
MAX77620,
MAX20024,
+ MAX77663,
};

struct max77620_chip {
--
2.21.0