Re: [PATCH] thermal: core: skip update disabled thermal zones after suspend

[Zhang Rui]

On ä, 2019-04-22 at 09:44 -0700, Wei Wang wrote:
> On Mon, Apr 22, 2019 at 2:03 AM Zhang Rui <rui.zhang@xxxxxxxxx>
> wrote:
> > 
> > 
> > On ä, 2019-04-16 at 10:07 -0700, Wei Wang wrote:
> > > 
> > > It is unnecessary to update disabled thermal zones post suspend
> > > and
> > > sometimes leads error/warning in bad behaved thermal drivers.
> > > 
> > a good catch, and in fact, there are more issues about thermal
> > handling
> > for disabled thermal zones, like we're able to read the temperature
> > of
> > disabled thermal zones, either via sysfs or via function calls like
> > thermal_zone_device_update.
> Thanks Rui for following up. Yes, we noticed the same behavior. Right
> now, individual thermal driver can still respect set_mode and present
> value meaningful or return error when thermal zone disabled, and
> that's what we do locally.
> Currently, sysfs-api documents "Preventing kernel thermal zone driver
> actions upon trip points so that user application can take full
> charge
> of the thermal management.", so is it intended for some other agents
> in kernel or user land polling temperature with function call or
> sysfs
> respectively?

hmmm, here we have three cases,
1). we can read the temperature and we can take cooling actions.
2). we can read the temperature only
3). we can not read the temperature

we do have a case for 3), e.g. the wifi device, which registers a
thermal zone, but it does not work if wifi firmware is unloaded. And
IMO, we should set the thermal zone mode to disable for this case.

I'm not sure if there is any case for 2), but if we do, it seems to me
that we should set its governor to nop, rather then the way we're
describing in the sys-abi file.

we should fix the code and doc to use "mode" attribute to handle case
3) instead.

thanks,
rui
> 
> Thanks!
> -Wei
> > 
> > For this patch, I will take it as it fixes one of the problem.
> > 
> > thanks,
> > rui
> > 
> > > 
> > > Signed-off-by: Wei Wang <wvw@xxxxxxxxxx>
> > > ---
> > > Âdrivers/thermal/thermal_core.c | 8 ++++++++
> > > Â1 file changed, 8 insertions(+)
> > > 
> > > diff --git a/drivers/thermal/thermal_core.c
> > > b/drivers/thermal/thermal_core.c
> > > index 6590bb5cb688..5baf5cfab999 100644
> > > --- a/drivers/thermal/thermal_core.c
> > > +++ b/drivers/thermal/thermal_core.c
> > > @@ -1494,6 +1494,7 @@ static int thermal_pm_notify(struct
> > > notifier_block *nb,
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂunsigned long mode, void *_unused)
> > > Â{
> > > ÂÂÂÂÂÂstruct thermal_zone_device *tz;
> > > +ÂÂÂÂÂenum thermal_device_mode tz_mode;
> > > 
> > > ÂÂÂÂÂÂswitch (mode) {
> > > ÂÂÂÂÂÂcase PM_HIBERNATION_PREPARE:
> > > @@ -1506,6 +1507,13 @@ static int thermal_pm_notify(struct
> > > notifier_block *nb,
> > > ÂÂÂÂÂÂcase PM_POST_SUSPEND:
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂatomic_set(&in_suspend, 0);
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂlist_for_each_entry(tz, &thermal_tz_list, node) {
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂtz_mode = THERMAL_DEVICE_ENABLED;
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂif (tz->ops->get_mode)
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂtz->ops->get_mode(tz, &tz_mode);
> > > +
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂif (tz_mode == THERMAL_DEVICE_DISABLED)
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂcontinue;
> > > +
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂthermal_zone_device_init(tz);
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂthermal_zone_device_update(tz,
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂTHERMAL_EVENT_UN
> > > S
> > > PECIFIED);