Re: [PATCH v6 09/10] ARM: dts: exynos: add DMC device for exynos5422

From: Krzysztof Kozlowski
Date: Tue Apr 23 2019 - 07:03:19 EST


On Fri, 19 Apr 2019 at 16:19, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
>
> Add description of Dynamic Memory Controller and PPMU counters.
> They are used by exynos5422-dmc driver.
> There is a definition of the memory chip, hwich is then used during

which

> calculation of timings for each OPP.
> The algorithm in the driver needs these two sets to bound the timings.
>
> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 120 ++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 120 ++++++++++++++++++++++++++
> 2 files changed, 240 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index aaff158..b687cd7 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -14,6 +14,7 @@
> #include <dt-bindings/clock/exynos5420.h>
> #include <dt-bindings/clock/exynos-audss-clk.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pmu/exynos_ppmu.h>
>
> / {
> compatible = "samsung,exynos5420", "samsung,exynos5";
> @@ -235,6 +236,37 @@
> status = "disabled";
> };
>
> + dmc: memory-controller@10c20000 {
> + compatible = "samsung,exynos5422-dmc";
> + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>,

I think in the driver you access range up to 0xff of each DREX memory
region. Do not map entire 0x10000 if not needed.


> + <0x10000000 0x1000>, <0x10030000 0x1000>;
> + clocks = <&clock CLK_FOUT_SPLL>,
> + <&clock CLK_MOUT_SCLK_SPLL>,
> + <&clock CLK_FF_DOUT_SPLL2>,
> + <&clock CLK_FOUT_BPLL>,
> + <&clock CLK_MOUT_BPLL>,
> + <&clock CLK_SCLK_BPLL>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
> + <&clock CLK_MOUT_MCLK_CDREX>,
> + <&clock CLK_DOUT_CLK2X_PHY0>,
> + <&clock CLK_CLKM_PHY0>,
> + <&clock CLK_CLKM_PHY1>;
> + clock-names = "fout_spll",
> + "mout_sclk_spll",
> + "ff_dout_spll2",
> + "fout_bpll",
> + "mout_bpll",
> + "sclk_bpll",
> + "mout_mx_mspll_ccore",
> + "mout_mx_mspll_ccore_phy",
> + "mout_mclk_cdrex",
> + "dout_clk2x_phy0",
> + "clkm_phy0",
> + "clkm_phy1";
> + status = "disabled";
> + };
> +
> nocp_mem0_0: nocp@10ca1000 {
> compatible = "samsung,exynos5420-nocp";
> reg = <0x10CA1000 0x200>;
> @@ -271,6 +303,94 @@
> status = "disabled";
> };
>
> + ppmu_dmc0_0: ppmu@10d00000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d00000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
> + clock-names = "ppmu";
> + events {
> + ppmu_event0_dmc0_0: ppmu-event0-dmc0_0 {
> + event-name = "ppmu-event0-dmc0_0";
> + event-data-type = <PPMU_RO_DATA_CNT>;
> + };
> + ppmu_event1_dmc0_0: ppmu-event1-dmc0_0 {
> + event-name = "ppmu-event1-dmc0_0";
> + event-data-type = <PPMU_WO_DATA_CNT>;
> + };
> + ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
> + event-name = "ppmu-event3-dmc0_0";
> + event-data-type = <(PPMU_RO_DATA_CNT |
> + PPMU_WO_DATA_CNT)>;
> + };
> + };
> + };
> +
> + ppmu_dmc0_1: ppmu@10d10000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d10000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
> + clock-names = "ppmu";
> + events {
> + ppmu_event0_dmc0_1: ppmu-event0-dmc0_1 {
> + event-name = "ppmu-event0-dmc0_1";
> + event-data-type = <PPMU_RO_DATA_CNT>;
> + };
> + ppmu_event1_dmc0_1: ppmu-event1-dmc0_1 {
> + event-name = "ppmu-event1-dmc0_1";
> + event-data-type = <PPMU_WO_DATA_CNT>;
> + };
> + ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
> + event-name = "ppmu-event3-dmc0_1";
> + event-data-type = <(PPMU_RO_DATA_CNT |
> + PPMU_WO_DATA_CNT)>;
> + };
> + };
> + };
> +
> + ppmu_dmc1_0: ppmu@10d60000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d60000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
> + clock-names = "ppmu";
> + events {
> + ppmu_event0_dmc1_0: ppmu-event0-dmc1_0 {
> + event-name = "ppmu-event0-dmc1_0";
> + event-data-type = <PPMU_RO_DATA_CNT>;
> + };
> + ppmu_event1_dmc1_0: ppmu-event1-dmc1_0 {
> + event-name = "ppmu-event1-dmc1_0";
> + event-data-type = <PPMU_WO_DATA_CNT>;
> + };
> + ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
> + event-name = "ppmu-event3-dmc1_0";
> + event-data-type = <(PPMU_RO_DATA_CNT |
> + PPMU_WO_DATA_CNT)>;
> + };
> + };
> + };
> +
> + ppmu_dmc1_1: ppmu@10d70000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d70000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
> + clock-names = "ppmu";
> + events {
> + ppmu_event0_dmc1_1: ppmu-event0-dmc1_1 {
> + event-name = "ppmu-event0-dmc1_1";
> + event-data-type = <PPMU_RO_DATA_CNT>;
> + };
> + ppmu_event1_dmc1_1: ppmu-event1-dmc1_1 {
> + event-name = "ppmu-event1-dmc1_1";
> + event-data-type = <PPMU_WO_DATA_CNT>;
> + };
> + ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
> + event-name = "ppmu-event3-dmc1_1";
> + event-data-type = <(PPMU_RO_DATA_CNT |
> + PPMU_WO_DATA_CNT)>;
> + };
> + };
> + };
> +
> gsc_pd: power-domain@10044000 {
> compatible = "samsung,exynos4210-pd";
> reg = <0x10044000 0x20>;
> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> index 25d95de1..76bf0dbf 100644
> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
> @@ -34,6 +34,95 @@
> clock-frequency = <24000000>;
> };
> };
> +
> + dmc_opp_table: opp_table2 {
> + compatible = "operating-points-v2";
> +
> + opp00 {
> + opp-hz = /bits/ 64 <165000000>;
> + opp-microvolt = <875000>;
> + };
> + opp01 {
> + opp-hz = /bits/ 64 <206000000>;
> + opp-microvolt = <875000>;
> + };
> + opp02 {
> + opp-hz = /bits/ 64 <275000000>;
> + opp-microvolt = <875000>;
> + };
> + opp03 {
> + opp-hz = /bits/ 64 <413000000>;
> + opp-microvolt = <887500>;
> + };
> + opp04 {
> + opp-hz = /bits/ 64 <543000000>;
> + opp-microvolt = <937500>;
> + };
> + opp05 {
> + opp-hz = /bits/ 64 <633000000>;
> + opp-microvolt = <1012500>;
> + };
> + opp06 {
> + opp-hz = /bits/ 64 <728000000>;
> + opp-microvolt = <1037500>;
> + };
> + opp07 {
> + opp-hz = /bits/ 64 <825000000>;
> + opp-microvolt = <1050000>;
> + };
> + };
> +
> + samsung_K3QF2F20DB: lpddr3 {
> + compatible = "Samsung,K3QF2F20DB","jedec,lpddr3";

Missing space after coma.

> + density = <16384>;
> + io-width = <32>;
> +
> + tRFC-min-tck = <17>;
> + tRRD-min-tck = <2>;
> + tRPab-min-tck = <2>;
> + tRPpb-min-tck = <2>;
> + tRCD-min-tck = <3>;
> + tRC-min-tck = <6>;
> + tRAS-min-tck = <5>;
> + tWTR-min-tck = <2>;
> + tWR-min-tck = <7>;
> + tRTP-min-tck = <2>;
> + tW2W-C2C-min-tck = <0>;
> + tR2R-C2C-min-tck = <0>;
> + tWL-min-tck = <8>;
> + tDQSCK-min-tck = <5>;
> + tRL-min-tck = <14>;
> + tFAW-min-tck = <5>;
> + tXSR-min-tck = <12>;
> + tXP-min-tck = <2>;
> + tCKE-min-tck = <2>;
> + tCKESR-min-tck = <2>;
> + tMRD-min-tck = <5>;
> +
> + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {

@0 does not look correct... you do not have <reg>. No DTC warnings here?

Best regards,
Krzysztof