Re: [PATCH v2] soc: add aspeed folder and misc drivers

From: Patrick Venture
Date: Tue Apr 23 2019 - 11:28:28 EST

On Tue, Apr 23, 2019 at 8:22 AM Patrick Venture <venture@xxxxxxxxxx> wrote:
>
> On Tue, Apr 23, 2019 at 7:26 AM Patrick Venture <venture@xxxxxxxxxx> wrote:
> >
> > Create a SoC folder for the ASPEED parts and place the misc drivers
> > currently present into this folder. These drivers are not generic part
> > drivers, but rather only apply to the ASPEED SoCs.
> >
> > Signed-off-by: Patrick Venture <venture@xxxxxxxxxx>
>
> Accidentally lost the Acked-by when re-sending this patchset as I
> didn't see it on v1 before re-sending v2 to the larger audience.

Since there was a change between v1 and v2, Arnd, I'd appreciate you
Ack this version of the patchset since it changes when the soc/aspeed
Makefile is followed.

>
> > ---
> > v2:
> > Added configuration option for ASPEED to soc/Makefile
> > ---
> > drivers/misc/Kconfig | 16 ----------------
> > drivers/misc/Makefile | 2 --
> > drivers/soc/Kconfig | 1 +
> > drivers/soc/Makefile | 1 +
> > drivers/soc/aspeed/Kconfig | 19 +++++++++++++++++++
> > drivers/soc/aspeed/Makefile | 2 ++
> > .../{misc => soc/aspeed}/aspeed-lpc-ctrl.c | 0
> > .../{misc => soc/aspeed}/aspeed-lpc-snoop.c | 0
> > 8 files changed, 23 insertions(+), 18 deletions(-)
> > create mode 100644 drivers/soc/aspeed/Kconfig
> > create mode 100644 drivers/soc/aspeed/Makefile
> > rename drivers/{misc => soc/aspeed}/aspeed-lpc-ctrl.c (100%)
> > rename drivers/{misc => soc/aspeed}/aspeed-lpc-snoop.c (100%)
> >
> > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > index 42ab8ec92a04..b80cb6af0cb4 100644
> > --- a/drivers/misc/Kconfig
> > +++ b/drivers/misc/Kconfig
> > @@ -496,22 +496,6 @@ config VEXPRESS_SYSCFG
> > bus. System Configuration interface is one of the possible means
> > of generating transactions on this bus.
> >
> > -config ASPEED_LPC_CTRL
> > - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > - tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> > - ---help---
> > - Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
> > - ioctl()s, the driver also provides a read/write interface to a BMC ram
> > - region where the host LPC read/write region can be buffered.
> > -
> > -config ASPEED_LPC_SNOOP
> > - tristate "Aspeed ast2500 HOST LPC snoop support"
> > - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > - help
> > - Provides a driver to control the LPC snoop interface which
> > - allows the BMC to listen on and save the data written by
> > - the host to an arbitrary LPC I/O port.
> > -
> > config PCI_ENDPOINT_TEST
> > depends on PCI
> > select CRC32
> > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> > index d5b7d3404dc7..b9affcdaa3d6 100644
> > --- a/drivers/misc/Makefile
> > +++ b/drivers/misc/Makefile
> > @@ -54,8 +54,6 @@ obj-$(CONFIG_GENWQE) += genwqe/
> > obj-$(CONFIG_ECHO) += echo/
> > obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
> > obj-$(CONFIG_CXL_BASE) += cxl/
> > -obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> > -obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> > obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> > obj-$(CONFIG_OCXL) += ocxl/
> > obj-y += cardreader/
> > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> > index c07b4a85253f..b750a88547c7 100644
> > --- a/drivers/soc/Kconfig
> > +++ b/drivers/soc/Kconfig
> > @@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
> >
> > source "drivers/soc/actions/Kconfig"
> > source "drivers/soc/amlogic/Kconfig"
> > +source "drivers/soc/aspeed/Kconfig"
> > source "drivers/soc/atmel/Kconfig"
> > source "drivers/soc/bcm/Kconfig"
> > source "drivers/soc/fsl/Kconfig"
> > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> > index 90b686e586c6..814128fe479f 100644
> > --- a/drivers/soc/Makefile
> > +++ b/drivers/soc/Makefile
> > @@ -4,6 +4,7 @@
> > #
> >
> > obj-$(CONFIG_ARCH_ACTIONS) += actions/
> > +obj-$(CONFIG_ARCH_ASPEED) += aspeed/
> > obj-$(CONFIG_ARCH_AT91) += atmel/
> > obj-y += bcm/
> > obj-$(CONFIG_ARCH_DOVE) += dove/
> > diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig
> > new file mode 100644
> > index 000000000000..457282cd1da5
> > --- /dev/null
> > +++ b/drivers/soc/aspeed/Kconfig
> > @@ -0,0 +1,19 @@
> > +menu "Aspeed SoC drivers"
> > +
> > +config ASPEED_LPC_CTRL
> > + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > + tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> > + ---help---
> > + Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
> > + ioctl()s, the driver also provides a read/write interface to a BMC ram
> > + region where the host LPC read/write region can be buffered.
> > +
> > +config ASPEED_LPC_SNOOP
> > + tristate "Aspeed ast2500 HOST LPC snoop support"
> > + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> > + help
> > + Provides a driver to control the LPC snoop interface which
> > + allows the BMC to listen on and save the data written by
> > + the host to an arbitrary LPC I/O port.
> > +
> > +
> > diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile
> > new file mode 100644
> > index 000000000000..cfaa9adc67b5
> > --- /dev/null
> > +++ b/drivers/soc/aspeed/Makefile
> > @@ -0,0 +1,2 @@
> > +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> > +obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> > diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
> > similarity index 100%
> > rename from drivers/misc/aspeed-lpc-ctrl.c
> > rename to drivers/soc/aspeed/aspeed-lpc-ctrl.c
> > diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
> > similarity index 100%
> > rename from drivers/misc/aspeed-lpc-snoop.c
> > rename to drivers/soc/aspeed/aspeed-lpc-snoop.c
> > --
> > 2.21.0.593.g511ec345e18-goog
> >