Re: [PATCH v4 24/63] Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST

[Mauro Carvalho Chehab]

Em Wed, 24 Apr 2019 00:28:53 +0800
Changbin Du <changbin.du@xxxxxxxxx> escreveu:

> This converts the plain text documentation to reStructuredText format and
> add it to Sphinx TOC tree. No essential content change.
> 
> Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
> ---
>  Documentation/firmware-guide/acpi/index.rst   |  1 +
>  .../acpi/video_extension.rst}                 | 63 ++++++++++---------
>  2 files changed, 36 insertions(+), 28 deletions(-)
>  rename Documentation/{acpi/video_extension.txt => firmware-guide/acpi/video_extension.rst} (79%)
> 
> diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
> index 0e60f4b7129a..ae609eec4679 100644
> --- a/Documentation/firmware-guide/acpi/index.rst
> +++ b/Documentation/firmware-guide/acpi/index.rst
> @@ -23,3 +23,4 @@ ACPI Support
>     i2c-muxes
>     acpi-lid
>     lpit
> +   video_extension
> diff --git a/Documentation/acpi/video_extension.txt b/Documentation/firmware-guide/acpi/video_extension.rst
> similarity index 79%
> rename from Documentation/acpi/video_extension.txt
> rename to Documentation/firmware-guide/acpi/video_extension.rst
> index 79bf6a4921be..06f7e3230b6e 100644
> --- a/Documentation/acpi/video_extension.txt
> +++ b/Documentation/firmware-guide/acpi/video_extension.rst
> @@ -1,5 +1,8 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=====================
>  ACPI video extensions
> -~~~~~~~~~~~~~~~~~~~~~
> +=====================
>  
>  This driver implement the ACPI Extensions For Display Adapters for
>  integrated graphics devices on motherboard, as specified in ACPI 2.0
> @@ -8,9 +11,10 @@ defining the video POST device, retrieving EDID information or to
>  setup a video output, etc.  Note that this is an ref. implementation
>  only.  It may or may not work for your integrated video device.
>  
> -The ACPI video driver does 3 things regarding backlight control:
> +The ACPI video driver does 3 things regarding backlight control.
>  
> -1 Export a sysfs interface for user space to control backlight level
> +1. Export a sysfs interface for user space to control backlight level
> +=====================================================================
>  
>  If the ACPI table has a video device, and acpi_backlight=vendor kernel
>  command line is not present, the driver will register a backlight device

Hmm... you didn't touch on this part of the document:

	And what ACPI video driver does is:
	actual_brightness: on read, control method _BQC will be evaluated to
	get the brightness level the firmware thinks it is at;
	bl_power: not implemented, will set the current brightness instead;
	brightness: on write, control method _BCM will run to set the requested
	brightness level;
	max_brightness: Derived from the _BCL package(see below);
	type: firmware

You should touch it. My suggestion here is:

	And what ACPI video driver does is:

	actual_brightness:
		on read, control method _BQC will be evaluated to
		get the brightness level the firmware thinks it is at;
	bl_power:
		not implemented, will set the current brightness instead;
	brightness:
		on write, control method _BCM will run to set the requested
		brightness level;
	max_brightness:
		Derived from the _BCL package(see below);
	type:
		firmware

> @@ -32,26 +36,26 @@ type: firmware
>  
>  Note that ACPI video backlight driver will always use index for
>  brightness, actual_brightness and max_brightness. So if we have
> -the following _BCL package:
> +the following _BCL package::
>  
> -Method (_BCL, 0, NotSerialized)
> -{
> -	Return (Package (0x0C)
> +	Method (_BCL, 0, NotSerialized)
>  	{
> -		0x64,
> -		0x32,
> -		0x0A,
> -		0x14,
> -		0x1E,
> -		0x28,
> -		0x32,
> -		0x3C,
> -		0x46,
> -		0x50,
> -		0x5A,
> -		0x64
> -	})
> -}
> +		Return (Package (0x0C)
> +		{
> +			0x64,
> +			0x32,
> +			0x0A,
> +			0x14,
> +			0x1E,
> +			0x28,
> +			0x32,
> +			0x3C,
> +			0x46,
> +			0x50,
> +			0x5A,
> +			0x64
> +		})
> +	}
>  
>  The first two levels are for when laptop are on AC or on battery and are
>  not used by Linux currently. The remaining 10 levels are supported levels
> @@ -62,13 +66,15 @@ as a "brightness level" indicator. Thus from the user space perspective
>  the range of available brightness levels is from 0 to 9 (max_brightness)
>  inclusive.
>  
> -2 Notify user space about hotkey event
> +2. Notify user space about hotkey event
> +=======================================
>  
>  There are generally two cases for hotkey event reporting:
> +
>  i) For some laptops, when user presses the hotkey, a scancode will be
>     generated and sent to user space through the input device created by
>     the keyboard driver as a key type input event, with proper remap, the
> -   following key code will appear to user space:
> +   following key code will appear to user space::
>  
>  	EV_KEY, KEY_BRIGHTNESSUP
>  	EV_KEY, KEY_BRIGHTNESSDOWN
> @@ -82,7 +88,7 @@ ii) For some laptops, the press of the hotkey will not generate the
>      about the event. The event value is defined in the ACPI spec. ACPI
>      video driver will generate an key type input event according to the
>      notify value it received and send the event to user space through the
> -    input device it created:
> +    input device it created::
>  
>  	event		keycode
>  	0x86		KEY_BRIGHTNESSUP

Perhaps making this as a table would work better:

    input device it created:

	=====		===================
	event		keycode
	=====		===================
	0x86		KEY_BRIGHTNESSUP
	0x87		KEY_BRIGHTNESSDOWN
	etc.
	=====		===================


> @@ -94,13 +100,14 @@ so this would lead to the same effect as case i) now.
>  Once user space tool receives this event, it can modify the backlight
>  level through the sysfs interface.
>  
> -3 Change backlight level in the kernel
> +3. Change backlight level in the kernel
> +=======================================
>  
>  This works for machines covered by case ii) in Section 2. Once the driver
>  received a notification, it will set the backlight level accordingly. This does
>  not affect the sending of event to user space, they are always sent to user
>  space regardless of whether or not the video module controls the backlight level
>  directly. This behaviour can be controlled through the brightness_switch_enabled
> -module parameter as documented in admin-guide/kernel-parameters.rst. It is recommended to
> -disable this behaviour once a GUI environment starts up and wants to have full
> -control of the backlight level.
> +module parameter as documented in admin-guide/kernel-parameters.rst. It is
> +recommended to disable this behaviour once a GUI environment starts up and
> +wants to have full control of the backlight level.



Thanks,
Mauro