RE: [PATCH v6 1/6] dt-bindings: add binding for USBSS-DRD controller.

[Pawel Laszczak]

Hi Roger,

>On 10/04/2019 10:48, Pawel Laszczak wrote:
>> This patch aim at documenting USB related dt-bindings for the
>> Cadence USBSS-DRD controller.
>>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>>
>> ---
>>  .../devicetree/bindings/usb/cdns-usb3.txt     | 30 +++++++++++++++++++
>>  1 file changed, 30 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
>> new file mode 100644
>> index 000000000000..1d2b449e3cb4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
>> @@ -0,0 +1,30 @@
>> +Binding for the Cadence USBSS-DRD controller
>> +
>> +Required properties:
>> +  - reg: Physical base address and size of the controller's register areas.
>> +	 Controller has 3 different regions:
>> +	 region 1 - HOST registers area
>> +	 region 2 - DEVICE registers area
>> +	 region 3 - OTG/DRD registers area
>> +  - reg-names - register memory area names:
>> +	"xhci" - for HOST registers space
>> +	"dev" - for DEVICE registers space
>> +	"otg" - for OTG/DRD registers space
>> +  - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
>> +  - interrupts: Interrupts used by cdns3 controller.
>> +
>> +Optional properties:
>> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
>> +                   "full-speed"; refer to usb/generic.txt
>> + - dr_mode: Should be one of "host", "peripheral" or "otg".
>> + - phys: reference to the USB PHY
>
>In your test platform is this a 2.0PHY or 3.0PHY? Typical platforms will have both.
>Is there any power-on sequencing requirements for powering up these PHYs vs powering up the controller?
>
Generally, my testing platform is based on PCIe, so I donât use dts. PHY initialization on my testing platform 
has been hidden in FPGA implementation. We are using DTS in simulation but there we don't have a PHYs. 

I think that you have right, and we should have here two USB2.0 and USB3.0 phy. 
I have to look at how it looks in other drivers and improve this this file and maybe CDNS3 driver too. 

>> +
>> +Example:
>> +	usb@f3000000 {
>> +		compatible = "cdns,usb3-1.0.1";
>> +		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg = <0xf3000000 0x10000	/* memory area for HOST registers */
>> +			0xf3010000 0x10000	/* memory area for DEVICE registers */
>> +			0xf3020000 0x10000>;	/* memory area for OTG/DRD registers */
>> +		reg-names = "xhci", "dev", "otg";
>> +	};
>>
>

cheers,
Pawel