Re: [PATCH] watchdog: stm32: add dynamic prescaler support
From: Ludovic BARRE
Date: Mon Apr 29 2019 - 09:51:38 EST
Hi Guenter
On 4/26/19 4:16 PM, Guenter Roeck wrote:
On Fri, Apr 26, 2019 at 03:41:15PM +0200, Ludovic Barre wrote:
From: Ludovic Barre <ludovic.barre@xxxxxx>
This patch allows to define the max prescaler by compatible.
To set a large range of timeout, the prescaler should be set
dynamically (from the timeout request) to improve the resolution
in order to have a timeout close to the expected value.
Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
drivers/watchdog/stm32_iwdg.c | 70 +++++++++++++++++++++++++------------------
1 file changed, 41 insertions(+), 29 deletions(-)
diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index e00e3b3..91d0a89 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -34,18 +34,10 @@
#define KR_KEY_EWA 0x5555 /* write access enable */
#define KR_KEY_DWA 0x0000 /* write access disable */
-/* IWDG_PR register bit values */
-#define PR_4 0x00 /* prescaler set to 4 */
-#define PR_8 0x01 /* prescaler set to 8 */
-#define PR_16 0x02 /* prescaler set to 16 */
-#define PR_32 0x03 /* prescaler set to 32 */
-#define PR_64 0x04 /* prescaler set to 64 */
-#define PR_128 0x05 /* prescaler set to 128 */
-#define PR_256 0x06 /* prescaler set to 256 */
+#define PR_SHIFT 2
/* IWDG_RLR register values */
-#define RLR_MIN 0x07C /* min value supported by reload register */
-#define RLR_MAX 0xFFF /* max value supported by reload register */
+#define RLR_MAX GENMASK(11, 0) /* max value of reload register */
/* IWDG_SR register bit mask */
#define FLAG_PVU BIT(0) /* Watchdog prescaler value update */
@@ -55,15 +47,28 @@
#define TIMEOUT_US 100000
#define SLEEP_US 1000
-#define HAS_PCLK true
+struct stm32_iwdg_data {
+ bool has_pclk;
+ u32 max_prescaler;
+};
+
+static const struct stm32_iwdg_data stm32_iwdg_data = {
+ .has_pclk = false,
+ .max_prescaler = 256,
+};
+
+static const struct stm32_iwdg_data stm32mp1_iwdg_data = {
+ .has_pclk = true,
+ .max_prescaler = 1024,
+};
struct stm32_iwdg {
struct watchdog_device wdd;
+ const struct stm32_iwdg_data *data;
void __iomem *regs;
struct clk *clk_lsi;
struct clk *clk_pclk;
unsigned int rate;
- bool has_pclk;
};
static inline u32 reg_read(void __iomem *base, u32 reg)
@@ -80,21 +85,30 @@ static int stm32_iwdg_start(struct watchdog_device *wdd)
{
struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
u32 val = FLAG_PVU | FLAG_RVU;
- u32 reload;
+ u32 timeout, presc, iwdg_rlr, iwdg_pr;
int ret;
dev_dbg(wdd->parent, "%s\n", __func__);
- /* prescaler fixed to 256 */
- reload = clamp_t(unsigned int, ((wdd->timeout * wdt->rate) / 256) - 1,
- RLR_MIN, RLR_MAX);
+ timeout = clamp_t(unsigned int, wdd->timeout,
+ wdd->min_timeout, wdd->max_hw_heartbeat_ms / 1000);
+
+ if (timeout != wdd->timeout)
+ dev_warn(wdd->parent, "timeout skrinked to %d\n", timeout);
+
Valid values for timeout should be set in the set_timeout function,
not here. As such, there is no need for this warning. More specifically,
if the selected timeout is between min_timeout and max_hw_heartbeat_ms,
and the hardware can not meet the exact requested value, the set_timeout
function should adjust wdd->timeout value accordingly.
Ok, so I will adjust the timeout (with prescaler and reload look-up)
value in set_timeout function. thanks
Example: The requested timeout is 55 seconds, but the hardware can
only support either 32 or 64 seconds. The set_timeout function should
then set wdd->timeout to either 32 or 64.
Furthermore, this is a valid condition. For example, the timeout could
be set for one hour (or day), and the maximum heartbeat could be one
minute. In that situation, the watchdog core handles heartbeat/ping
requests. Again, this does not warrant a warning.
On top of all that, if the hardware can not set a minimum timeout of
1 second, min_timeout should not be set to 1 second. It should be set
to the actual minimum supportable value if that value is larger than
1 second.
+ presc = DIV_ROUND_UP(timeout * wdt->rate, RLR_MAX + 1);
+
+ /* The prescaler is align on power of 2 and start at 2 ^ PR_SHIFT. */
+ presc = roundup_pow_of_two(presc);
+ iwdg_pr = presc <= 1 << PR_SHIFT ? 0 : ilog2(presc) - PR_SHIFT;
+ iwdg_rlr = ((timeout * wdt->rate) / presc) - 1;
/* enable write access */
reg_write(wdt->regs, IWDG_KR, KR_KEY_EWA);
/* set prescaler & reload registers */
- reg_write(wdt->regs, IWDG_PR, PR_256); /* prescaler fix to 256 */
- reg_write(wdt->regs, IWDG_RLR, reload);
+ reg_write(wdt->regs, IWDG_PR, iwdg_pr);
+ reg_write(wdt->regs, IWDG_RLR, iwdg_rlr);
reg_write(wdt->regs, IWDG_KR, KR_KEY_ENABLE);
/* wait for the registers to be updated (max 100ms) */
@@ -150,7 +164,7 @@ static int stm32_iwdg_clk_init(struct platform_device *pdev,
}
/* optional peripheral clock */
- if (wdt->has_pclk) {
+ if (wdt->data->has_pclk) {
wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(wdt->clk_pclk)) {
dev_err(&pdev->dev, "Unable to get pclk clock\n");
@@ -191,8 +205,8 @@ static const struct watchdog_ops stm32_iwdg_ops = {
};
static const struct of_device_id stm32_iwdg_of_match[] = {
- { .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
- { .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
+ { .compatible = "st,stm32-iwdg", .data = &stm32_iwdg_data },
+ { .compatible = "st,stm32mp1-iwdg", .data = &stm32mp1_iwdg_data },
{ /* end node */ }
};
MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
@@ -200,20 +214,17 @@ MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
static int stm32_iwdg_probe(struct platform_device *pdev)
{
struct watchdog_device *wdd;
- const struct of_device_id *match;
struct stm32_iwdg *wdt;
struct resource *res;
int ret;
- match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
- if (!match)
- return -ENODEV;
-
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
- wdt->has_pclk = match->data;
+ wdt->data = of_device_get_match_data(&pdev->dev);
+ if (!wdt->data)
+ return -ENODEV;
/* This is the timer base. */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -231,8 +242,9 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
wdd = &wdt->wdd;
wdd->info = &stm32_iwdg_info;
wdd->ops = &stm32_iwdg_ops;
- wdd->min_timeout = ((RLR_MIN + 1) * 256) / wdt->rate;
- wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * 256 * 1000) / wdt->rate;
+ wdd->min_timeout = 1;
Is this guaranteed to be no larger than 1 under all circumstances ?
[ Not that the old code was necessarily correct - it might have set
min_timeout to 0 if wdt->rate is high ]
Infact, for not guaranteed the min timeout at 1s, the input clock
(wdt->rate) should be < at 12Hz.
On ST micro controller/processor the wdt->rate is based on LSI
(Low Speed Internal) clock which is defined around 32KHz-39KHz
I wanted avoid to set 0, due to min_timeout definition
("unsigned int" in struct watchdog_device) and comparator used
in watchdog_timeout_invalid function.
if the calculated value is < 1 => I could set 1,
else I round on UP or Down value?
Regards,
Ludo
+ wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler *
+ 1000) / wdt->rate;
wdd->parent = &pdev->dev;
watchdog_set_drvdata(wdd, wdt);
--
2.7.4