Re: [PATCH v2] PCI: aardvark: Use LTSSM state to build link training flag

[Lorenzo Pieralisi]

On Mon, Apr 29, 2019 at 05:32:35PM +0200, Remi Pommarel wrote:
> Hi Lorenzo,
> 
> Sorry for duplicates I forgot to include everyone.
> 
> On Thu, Apr 25, 2019 at 04:06:40PM +0100, Lorenzo Pieralisi wrote:
> > On Thu, Apr 25, 2019 at 04:23:53PM +0200, Remi Pommarel wrote:
> > > Hi Lorenzo,
> > > 
> > > On Thu, Apr 25, 2019 at 12:08:30PM +0100, Lorenzo Pieralisi wrote:
> > > > On Sat, Mar 16, 2019 at 05:12:43PM +0100, Remi Pommarel wrote:
> > > > > The PCI_EXP_LNKSTA_LT flag in the emulated root device's PCI_EXP_LNKSTA
> > > > > config register does not reflect the actual link training state and is
> > > > > always cleared. The Link Training and Status State Machine (LTSSM) flag
> > > > > in LMI config register could be used as a link training indicator.
> > > > > Indeed if the LTSSM is in L0 or upper state then link training has
> > > > > completed (see [1]).
> > > > > 
> > > > > Unfortunately because setting the PCI_EXP_LINCTL_RL flag does not
> > > > > instantly imply a LTSSM state change (e.g. L0s to recovery state
> > > > > transition takes some time), LTSSM can be in L0 but link training has
> > > > > not finished yet. Thus a lower L0 LTSSM state followed by a L0 or upper
> > > > > state sequence has to be seen to be sure that link training has been
> > > > > done.
> > > > 
> > > > Hi Remi,
> > > > 
> > > > I am a bit confused, so you are saying that the LTSSM flag in the
> > > > LMI config register can't be used to detect when training is completed ?
> > > 
> > > Not exactly, I am saying that PCI_EXP_LNKSTA_LT from PCI_EXP_LNKSTA
> > > register can't be used with this hardware, but can be emulated with
> > > LTSSM flag.
> > > 
> > > > 
> > > > Certainly it can't be used by ASPM core that relies on:
> > > > 
> > > > PCI_EXP_LNKSTA_LT flag
> > > > 
> > > > in the PCI_EXP_LNKSTA register, and that's what you are setting through
> > > > this timeout mechanism IIUC.
> > > > 
> > > > Please elaborate on that.
> > > 
> > > The problem here is that the hardware does not change PCI_EXP_LNKSTA_LT
> > > at all. So in order to support link re-training feature we need to
> > > emulate this flag. To do so LTSSM flag can be used.
> > 
> > Understood.
> > 
> > > Indeed we can set the emulated PCI_EXP_LNKSTA_LT as soon as re-training
> > > is asked and wait for LTSSM flag to be back to a configured state
> > > (e.g. L0, L0s) before clearing it.
> > 
> > The check for the LTSSM is carried out through advk_pcie_link_up()
> > (ie register CFG_REG), correct ?
> > 
> 
> Yes that is correct.
> 
> > > The problem with that is that LTSSM flag does not change instantly after
> > > link re-training has been asked, and will stay in configured state for a
> > > small amount of time. So the idea is to poll the LTSSM flag and wait for
> > > it to enter a recovery state then waiting for it to be back in
> > > configured state.
> > 
> > When you say "poll" you mean checking advk_pcie_link_up() ?
> > 
> 
> I mean checking advk_pcie_link_up() in a loop. This loop is done by the
> user (e.g. ASPM core). ASPM core waits for PCI_EXP_LNKSTA_LT to be
> cleared in pcie_aspm_configure_common_clock() just after it has set
> PCI_EXP_LNKCTL_RL.
> 
> So the idea was to check advk_pcie_link_up() each time ASPM core checks
> the PCI_EXP_LNKSTA_LT flag. Please see below patch for an alternative
> to that.
> 
> > More below on the code.
> > 
> > > The timeout is only here as a fallback in the unlikely event that we
> > > missed the LTSSM flag entering recovery state.
> > > 
> > > > 
> > > > I am picking Bjorn's brain on this patch since what you are doing
> > > > seems quite arbitrary and honestly it is a bit of a hack.
> > > 
> > > Yes, sorry, it is a bit of a hack because I try to workaround a
> > > hardware issue.
> > 
> > No problems, it is not your fault.
> > > 
> > > Please note that vendor has been contacted about this in the meantime
> > > and answered the following:
> > > 
> > > "FW can poll LTSSM state equals any of the following values: 0xB or 0xD
> > > or 0xC or 0xE. After that, polls for LTSSM equals 0x10. For your
> > > information, LTSSM will transit from 0x10 -> 0xB -> 0xD -> 0xC or 0xE
> > > ........... -> 0x10".
> > > 
> > > It is basically what this patch does, I've just added a timeout fallback
> > > to not poll LTSSM state forever if its transition to 0xB, 0xD, 0xC or
> > > 0xE has been missed.
> > 
> > When you say "missed" you mean advk_pcie_link_up() returning true, right ?
> > 
> 
> Not exactly, I mean that LTSSM had the time to go down and back up
> between advk_pcie_link_up() because, for example, ASPM core loop took
> too much time between two PCI_EXP_LNKSTA_LT flag checks.
> 
> > [...]
> > 
> > > > > +static int advk_pcie_link_retraining(struct advk_pcie *pcie)
> > > > > +{
> > > > > +	if (!advk_pcie_link_up(pcie)) {
> > 
> > That's the bit I find confusing. Is this check here to detect if the
> > link went through the sequence below ? Should not it be carried
> > out only if (pcie->rl_asked == 1) ?
> > 
> > "... LTSSM will transit from 0x10 -> 0xB -> 0xD -> 0xC or 0xE
> >  ........... -> 0x10".
> 
> Yes it is the check to detect the sequence. advk_pcie_link_up() returns
> false if LTSSM <= 0x10.
> 
> This cannot be done only if (pcie->rl_asked == 1) because I still
> want this function to return 1 if link is still down.
> 
> > 
> > > > > +		pcie->rl_asked = 0;
> > 
> > Why ?
> > 
> 
> rl_asked is not a good name, I could have called it
> pcie->wait_for_link_down instead. So if advk_pcie_link_up() returns
> false that means that we don't need to wait for link being down any more
> and just wait for (LTSSM >= 0x10). In this case the delay is not needed.
> 
> > > > > +		return 1;
> > > > > +	}
> > > > > +
> > > > > +	if (pcie->rl_asked && time_before(jiffies, pcie->rl_deadline))
> > > > > +		return 1;
> > 
> > This ensures that if the LTSSM >= 0x10 we still wait for a delay before
> > considering the link up (because I suppose, after asking a retraining
> > it takes a while for the LTSSM state to become < 0x10), correct ?
> 
> Yes it takes a while to become < 0x10 after retraining hence the delay.
> But here we don't need to always wait for a delay. Indeed if we've
> already seen the link being < 0x10 (i.e if "pcie->rl_asked == 0") and
> if after that link is >= 0x10 then we know that retraining process has
> finished.
> 
> Anyway I did it this way because I wanted to keep
> advk_pci_bridge_emul_pcie_conf_write() from polling. But this is
> obviously a bad reason as it makes the code way too complex and relies
> on user (ASPM core) to do the poll instead.
> 
> So if you find the following better I'll send a v3 with that:
> 
> ---
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index eb58dfdaba1b..67e8ae4e313e 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -180,6 +180,9 @@
>  #define LINK_WAIT_MAX_RETRIES		10
>  #define LINK_WAIT_USLEEP_MIN		90000
>  #define LINK_WAIT_USLEEP_MAX		100000
> +#define RETRAIN_WAIT_MAX_RETRIES	20
> +#define RETRAIN_WAIT_USLEEP_MIN		2000
> +#define RETRAIN_WAIT_USLEEP_MAX		5000
>  
>  #define MSI_IRQ_NUM			32
>  
> @@ -239,6 +242,17 @@ static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
>  	return -ETIMEDOUT;
>  }
>  
> +static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
> +{
> +	size_t retries;
> +
> +	for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
> +		if (!advk_pcie_link_up(pcie))
> +			break;
> +		usleep_range(RETRAIN_WAIT_USLEEP_MIN, RETRAIN_WAIT_USLEEP_MAX);
> +	}
> +}
> +
>  static void advk_pcie_setup_hw(struct advk_pcie *pcie)
>  {
>  	u32 reg;
> @@ -426,11 +440,19 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
>  		return PCI_BRIDGE_EMUL_HANDLED;
>  	}
>  
> +	case PCI_EXP_LNKCTL: {
> +		u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
> +			~(PCI_EXP_LNKSTA_LT << 16);
> +		if (!advk_pcie_link_up(pcie))

Is this correct ?

"PCI Express Base Specification Rev4.0 Version 1.0" page 758

"Link Training: this read-only bit indicates that
the physical layer LTSSM is in the Configuration or
Recovery state or that 1b was written to the Retrain
Link..."

Isn't that a subset of states for which !advk_pcie_link_up()
return true ?

Lorenzo

> +			val |= (PCI_EXP_LNKSTA_LT << 16);
> +		*value = val;
> +		return PCI_BRIDGE_EMUL_HANDLED;
> +	}
> +
>  	case PCI_CAP_LIST_ID:
>  	case PCI_EXP_DEVCAP:
>  	case PCI_EXP_DEVCTL:
>  	case PCI_EXP_LNKCAP:
> -	case PCI_EXP_LNKCTL:
>  		*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
>  		return PCI_BRIDGE_EMUL_HANDLED;
>  	default:
> @@ -447,8 +469,13 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
>  
>  	switch (reg) {
>  	case PCI_EXP_DEVCTL:
> +		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
> +		break;
> +
>  	case PCI_EXP_LNKCTL:
>  		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
> +		if (new & PCI_EXP_LNKCTL_RL)
> +			advk_pcie_wait_for_retrain(pcie);
>  		break;
>  
>  	case PCI_EXP_RTCTL: